Development of a novel compact and fast SiPM-based RICH detector for the future ALICE 3 PID system at LHC

M. N. Mazziotta, A. R. Altamura, L. Congedo, G. De Robertis, A. Di Mauro, J. O. Guerra-Pulido, F. Licciulli, L. Lorusso, P. Martinengo, E. Nappi, N. Nicassio, G. Paić, G. Panzarini, R. Pillera, G. Volpe · 2026

Read Development of a novel compact and fast SiPM-based RICH detector for the future ALICE 3 PID system at LHC by M. N. Mazziotta, A. R. Altamura, L. Congedo, G. De Robertis, A. Di Mauro, J. O. Guerra-Pulido, F. Licciulli, L. Lorusso, P. Martinengo, E. Nappi, N. Nicassio, G. Paić, G. Panzarini, R. Pillera, G. Volpe (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-12472.txt.

Introduction

M. N. Mazziotta and a large team report work on a detector for a future collider experiment. The experiment is ALICE 3, proposed for later runs of the Large Hadron Collider. One of its jobs is to tell charged particles apart at high energy. A Ring Imaging Cherenkov detector is a classic tool for that job.

The team develop a novel version based on SiPM sensors. Their design aims to be compact and fast at once. Cherenkov light forms rings whose size reveals a particle speed. The team also study whether the same device can time particles from their light. A compact, fast design would ease the tight space and rate limits at the collider.

Catalog record

CREATORM. N. Mazziotta, A. R. Altamura, L. Congedo, G. De Robertis, A. Di Mauro, J. O. Guerra-Pulido, F. Licciulli, L. Lorusso, P. Martinengo, E. Nappi, N. Nicassio, G. Paić, G. Panzarini, R. Pillera, G. Volpe
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE14 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-12472

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Development of a novel compact and fast SiPM-based RICH detector for the future ALICE 3 PID system at LHC M. N. Mazziotta, A. R. Altamura, L. Congedo, G. De Robertis, A. Di Mauro, J. O. Guerra-Pulido, F. Licciulli, L. Lorusso, P. Martinengo, E. Nappi, N. Nicassio, G. Paić, G. Panzarini, R. Pillera, G. Volpe Abstract A dedicated R&D is ongoing for the charged particle identification system of the ALICE 3 experiment proposed for the LHC Run 5 and beyond. One of the subsystems for the high-energy charged particle identification will be a Ring-Imaging Cherenkov (RICH) detector. The possibility of integrating Cherenkov-based charged particle timing measurements is currently under study. The proposed system is based on a proximity-focusing RICH configuration including an aerogel radiator separated from a SiPM array layer by an expansion gap. A thin high-refractive index window of transparent material, acting as a second Cherenkov radiator, is glued on the SiPM array to enable time-of-flight measurements of charged particles by exploiting the yield of Cherenkov photons in the thin window. We assembled a small-scale prototype instrumented with different Hamamatsu SiPM array sensors with pitches ranging from 1 to 3 mm, readout by custom boards equipped with the front-end Petiroc 2A ASICs to measure charges and times. The primary Cherenkov radiator consisted of a 2 cm thick aerogel tile, while various window materials, including SiO 2 and MgF 2 , were used as secondary Cherenkov radiators. The prototype was successfully tested in a campaign at the CERN PS T10 beam line with pions and protons. This paper summarizes the results achieved in the 2023 test beam campaign. 1 Introduction The excellent properties of silicon photomultipliers (SiPMs) in terms of photon detection efficiency (PDE) and single photoelectron time resolution suggest the possibility of designing a compact and fast Ring-Imaging Cherenkov (RICH) system integrating Cherenkov-based timing measurements. A dedicated R&D is in progress for the optimization of the future charged particle identification system for the ALICE 3 experiment, planned as a follow-up to the current ALICE apparatus for LHC Runs 5 and 6 8 . The proposed system is based on a proximity-focusing RICH configuration using an aerogel tile as Cherenkov radiator separated from a SiPM array layer by an expansion gap. A thin high-refractive index slab of transparent material, acting as a second Cherenkov radiator for the impinging charged particles, is directly coupled to the SiPMs to achieve an efficient and precise charged particle timing. A prototype has been successfully assembled and tested at the CERN-PS T10 in October 2022 12 and 2023. In this work the results achieved in the 2023 test beam campaign are presented. 2 Beam test set-up The overall set-up at the CERN-PS T10 beam line is shown in Fig. 1 . The tested prototype shown in Fig. 2 consists of a cylinder housing a 2 cm thick aerogel from Aerogel Factory & Co., Ltd. with a refractive index of n = 1.03 at 400 nm wavelength 6 . The Cherenkov radiator is 23 cm far away from a photon detector layer consisting of eight HPK S13552 SiPM arrays 18 , the centers of which are assembled along a circumference of about 6.5 cm of radius. Two additional 8 \times 8 HPK S13361-3075AE-08 SiPM arrays (hereafter M0 and M1) are placed along the beam line to perform charged particle timing measurements. A 1 mm thick window, acting as a second Cherenkov radiator, is directly coupled to each of those arrays to study the charged particle timing thanks to the prompt production of Cherenkov photons in the window. A 1 mm thick MgF 2 ( n = 1.38 at 400 nm) window is glued on M0, while a 1 mm thick SiO 2 ( n = 1.47 at 400 nm) radiator is glued on M1. These radiators ensure a Cherenkov photon emission starting from momenta lower than 1 GeV/c for all the particle species of interest. Figure 1: Beam test set-up at CERN PS T10 line on Oct, 2023. The beam enters from the right side. The black boxes upstream and downstream the set-up include thin plastic scintillator tiles and two X-Y fiber tracker modules (T0 and T1) 11 . Figure 2: CAD view of the RICH cylinder with the central upstream SiPM array M0, the aerogel tile, the SiPM linear ring arrays and the central downstream SiPM array M1. Figure 3: Left panel: upstream S13361-3075AE-08 SiPM array coupled with a 1 mm thick MgF 2 window. Right panel: downstream photon detector plate with eight S13552 SiPM arrays and a central S13361-3075AE-08 SiPM array coupled with a 1 mm thick SiO 2 window. The arrays in the cylinder are mounted on copper plates, as shown in Fig. 3 , and cooled down to -5 ∘ C using water chillers and Peltier cells. The cylinder is flushed with Ar to keep the relative humidity < 2%. Ancillary systems include scintillator tiles for triggering and two X-Y fiber tracker modules, T0 upstream and T1 downstream, still equipped with S13552 arrays 11 operated at room temperature (see Fig. 1 ). Ring arrays, central arrays and tracker arrays are operated at an over-voltage of 4.6, 6.3 and 3.0 V, respectively. Each S13552 128-channels SiPM array is bonded on one side of a printed circuit board (PCB) and all channels are routed to four Samtec LSHM-120 multi-channel connectors 16 bonded on the other side of the PCB. Then, each S13552 SiPM array is plugged to a mezzanine PCB with four LSHM-120 connectors on one side to match the SiPM carrier board, and one LSHM-120 connector on the other side. In this way, each S13552 is readout with a single 32-channel ASIC grouping four adjacent channels, resulting in a readout pitch of 1 mm. Each S13361-3075AE-08 64-channels SiPM array is plugged with its two Samtec ST4-40-1.00-L-D-P-TR connectors 17 ; 1 to a custom mezzanine PCB that hosts two SS4-40-3-00-L-D-K connectors 2 on one side and two LSHM-120 connectors on the other side. The analog SiPM signals are read-out by custom front-end boards (FEB) in master-slave mode 11 ; 15 by means of 1 meter long high speed 50 Ohm multi-channels HLCD SAMTEC cables 10 . Then each HLCD with 32 anlog signals is read-out with a 32-channel Petiroc 2A ASIC (37 ps LSB TDC, 10 bit ADC) 14 . Each FEB hosts four Petiroc 2A ASICs, a CAEN A7585D SiPM voltage module 3 and a Kintex-7 FPGA mounted on a Mercury+ KX2 module 7 to configure both the ASICs and the trigger and to manage the data acquisition (DAQ). The SiPM carrier boards are equipped with 1-wire digital temperature sensors DS18B20 9 to monitor their temperatures, which are read-out by the FPGA. Further analog temperature sensors Thermistor NTC 10k 13 are assembled on the copper plates to monitor their temperatures by using Raspberry Pi 3 with ADS1115 16-Bit ADCs 5 . In addition, humidity sensors SHT31 4 have been used to monitor the room and cylinder humidity. 3 Data analysis and results For each dataset we evaluated the net ADC counts of individual channels by subtracting the corresponding pedestal values. Then, we identified the peaks in the net ADC charge distribution corresponding to the number of detected photoelectrons (PEs) and finally we calculated the

Read the complete text