Intrinsic ductility enhancement in Mg alloys elucidated via large-scale ab-initio calculations

Sambit Das, Vikram Gavini · 2026

Read Intrinsic ductility enhancement in Mg alloys elucidated via large-scale ab-initio calculations by Sambit Das, Vikram Gavini (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-12202.txt.

Introduction

Sambit Das and Vikram Gavini explain a gain in ductility in magnesium alloys via large ab-initio calculations. Magnesium is the lightest structural metal, yet its low ductility limits use. Recent work hints that dilute alloys gain ductility from solute shifts in dislocation core energy.

The key shift is in pyramidal screw dislocations, which can then cross-slip twice and spread strain. Their large first-principles runs test that story. A firmer story could guide alloy design for cars and planes. Light yet ductile alloys save fuel at scale. Their runs are large scale by the norms of the field.

Catalog record

CREATORSambit Das, Vikram Gavini
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE76 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-12202

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Intrinsic ductility enhancement in Mg alloys elucidated via large-scale ab-initio calculations Sambit Das, Vikram Gavini Abstract Magnesium is the lightest structural alloy, yet its practical use is limited by its low ductility. Recent studies suggest ductility enhancement in dilute Mg alloys may stem from favorable solute modification of ⟨ c + a ⟩ \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle pyramidal I/II screw dislocation core energy difference, activating ⟨ c + a ⟩ \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle slip via a double cross-slip mechanism. This work conducts large-scale DFT calculations, reaching ∼ \sim 6,000 atoms, of ⟨ c + a ⟩ \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle dislocation energetics in Mg and Mg-Y/Zn alloys. We find that relative solute strengthening effects on pyramidal I and II screw dislocation glide are crucial for cross-slip enhancement in Mg-Y, in contrast to prior investigations, that find solute-mediated dislocation-core energy modification as the main driver. Our predictions align with single- and poly-crystal experimental results and also capture the transition from pyramidal II to I preferred slip in Mg-Y. 1 Introduction Magnesium (Mg) is the lightest structural metal and abundantly available in the earth’s crust. The high strength to weight ratio of Mg makes it an ideal candidate for light-weight metallic alloys in automotive and aerospace sectors [ 29 ] . However, its technological use has been severely limited by the lack of ductility at room temperature. The low ductility of Mg is a consequence of the well known plastic anisotropy in its hexagonal close packed (HCP) crystal structure, accommodating only two independent easy glide slip systems— \{0\,0\,0\,1\}\langle 1\,1\,\overline{\vphantom{b}2}\,0\rangle basal slip (BS)—with a low critical resolved shear stress (CRSS) ( < 1MPa [ 38 ] ). The \{1\,0\,\overline{\vphantom{b}1}\,1\}\langle\overline{\vphantom{b}2}\,1\,1\,3\rangle first-order (I) pyramidal \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle slip (FPCS) and \{1\,1\,\overline{\vphantom{b}2}\,2\}\langle\overline{\vphantom{b}2}\,1\,1\,3\rangle second-order (II) pyramidal \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle slip (SPCS) are also glissile slip systems, although with moderate CRSS values (40–60 MPa [ 30 ] ). However, the \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle pyramidal (Pyr) edge dislocation segments are metastable and undergo a thermally assisted transformation to a much lower energy ( \sim 3 eV/nm lower) basal-dissociated sessile dislocation structure at room-temperature [ 42 ] . Two pathways for improving room temperature ductility of Mg, by accommodating non-basal plastic deformation, constitute deformation twinning [ 5 , 46 ] and \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle slip [ 45 ] . In this work, we focus on the \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle slip mechanism due to its potential for enabling large plastic strains [ 21 ] , and has been a subject of intense recent investigations [ 10 , 35 , 41 , 33 , 32 , 16 , 27 , 18 ] . Specifically, experimental studies have demonstrated that dilute solute alloying of Mg with transition metal solutes significantly improve ductility of Mg [ 32 , 31 ] . For instance, even a small concentration ( \sim 0.8 at.%) of Y solute enhances the strain to fracture by around 3 to 5 times compared to pure Mg [ 32 ] . Recent optical microscopy based slip trace analysis in Mg-Y single and poly-crystals [ 30 , 37 ] has associated the enhanced ductility with increased activation of FPCS and SPCS, with FPCS being more preferred beyond \sim 0.5 at.% Y. Mg-Zn is another important binary system with moderate ductility enhancement (2–3 times) observed for concentrations under 0.5 at.% Zn enabled by SPCS [ 4 , 34 ] . A mechanistic understanding of \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle slip activation in Mg alloys is crucial for computational design of binary and ternary Mg alloys, including rare-earth (RE) free Mg alloys [ 33 ] . The prevailing understanding of the mechanism driving the enhanced ductility of Mg-RE alloys was put forth in Refs. [ 41 , 2 , 1 ] , ascribed to the accelerated double cross-slip of \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle Pyr screw dislocations through dilute solute alloying. The cross-slip events are also observed experimentally in tensile testing of 0.8 at.% Mg-Y alloy [ 41 ] . In these works, a dislocation line tension based model was used to estimate the cross-slip rate, a measure of intrinsic ductility. The studies suggest that the cross-slip energy barrier ( \Delta G_{XS} ), estimated using the line tension model, reduces with increasing Y concentration (still in the dilute limit), thus enhancing the cross-slip rate and non-basal plastic activity. The line tension model adopted in the study requires two critical inputs from ab-initio electronic structure calculations: (i) the core energy difference between the \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle screw dislocations dissociated on pyramidal I and II planes in pure magnesium ( \Delta E^{\textrm{I-II}}_{\textrm{Mg}} =E^{\textrm{I}}_{\textrm{Mg}}-E^{\textrm{II}}_{\textrm{Mg}} ), and (ii) the interaction energy of these dislocations with substitutional solute atoms, denoted by U_{j} , with j denoting the site index of a dislocation core site. Accurate calculations of these quantities from density functional theory (DFT) have been challenging due to the large simulation domains needed to compute these quantities that have been out of reach using conventional DFT codes. Notably, the only estimates of \Delta E^{\textrm{I-II}}_{\textrm{Mg}} are using a quadrapole arrangement of dislocations with 600 atoms [ 17 ] , which resulted in significant cell-size errors, and another recent study [ 22 ] that used a larger simulation domain of 2000 atoms but was limited to a Mg pseudopotential with two valence electrons. On the contrary, as will be demonstrated in this study, a large simulation domain in conjunction with an accurate pseudopotential including the semi-core electrons is necessary to accurately compute \Delta E^{\textrm{I-II}}_{\textrm{Mg}} , a quantity with high sensitivity to cross-slip prediction. Further, direct DFT calculations to compute the dislocation solute interaction energies ( U_{j} ) require even larger simulation domains to avoid spurious solute-solute interactions from periodic images, and have not been possible thus far. In order to bypass the direct ab-initio computation of these crucial inputs into the line tension model, previous efforts [ 41 , 2 ] used a surrogate approach involving DFT computed interaction energies of solutes with the Pyr I/II stacking fault and elastic interaction energy between the solute misfit strain tensor and dislocation elastic stress field. The more sensitive \Delta E^{\textrm{I-II}}_{\textrm{Mg}} quantity was estimated by fitting the ductility enhancement to experimental data [ 41 ] . In this work, we conduct direct DFT calculations of \Delta E^{\textrm{I-II}}_{\textrm{Mg}} and U_{j} using DFT-FE —a massively parallel real-space DFT code based on adaptive finite-element discretization [ 24 , 9 ] enabling fast and accurate large-scale DFT calulations. Notably, we find simulation domains with \sim 3,000 atoms per periodic layer are needed to obtain a cell-size converged value for \Delta E^{\textrm{I-II}}_{\textrm{Mg}} to \sim 1 meV/nm accuracy. Moreover, we find domain sizes of \sim 6,000 atoms are required for cell-size converged U_{j} calculations, conducted for the Y and Zn solutes. Importantly, we find that direct DFT calculations of \Delta E^{\textrm{I-II}}_{\textrm{Mg}} and U_{j} do not support the findings in Ref. [ 41 ] where the enhanced cross-slip in Mg-Y alloy was attributed to the relative stabilization of Pyr I with respect to Pyr II \langle\textrm{{\bf c}}+\textrm{{\bf a}}\rangle screw dislocation with increasing Y concentration. On the contrary, we find \Delta E^{\textrm{I-II}}_{\textrm{Mg}} is positive and increases with Y concentration, which suggests that Pyr II screw dislocation is increasingly stabilized with respect to Pyr I with increasing Y concentration. Our study reveals the importance of accounting for (i) influence

Read the complete text