Transmon Architecture for Emission and Detection of Single Microwave Photons

Daniel L. Campbell, Stephen McCoy, Melinda Andrews, Alexander Madden, Viva R. Horowitz, Bakir Husremović, Samuel Marash, Christopher Nadeau, Man Nguyen, Michael Senatore, Samuel Schwab, Erin Sheridan, Matthew D. LaHaye · 2026

Read Transmon Architecture for Emission and Detection of Single Microwave Photons by Daniel L. Campbell, Stephen McCoy, Melinda Andrews, Alexander Madden, Viva R. Horowitz, Bakir Husremović, Samuel Marash, Christopher Nadeau, Man Nguyen, Michael Senatore, Samuel Schwab, Erin Sheridan, Matthew D. LaHaye (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-11378.txt.

Introduction

Daniel Campbell and six coauthors build transmons that emit and catch single photons. Their 2026 preprint shows a new circuit called the double transmon coupler. A transmon is a superconducting qubit used in quantum machines. The coupler links it to a waveguide of microwave modes.

The link is compact and can drop into known designs. It can be tuned and picks which transition couples out. Paired units act as emitter and detector for microwave photons. One unit sends a single photon down the waveguide. The other unit can catch that photon at the far end. Such links could wire quantum chips into networks.

Catalog record

CREATORDaniel L. Campbell, Stephen McCoy, Melinda Andrews, Alexander Madden, Viva R. Horowitz, Bakir Husremović, Samuel Marash, Christopher Nadeau, Man Nguyen, Michael Senatore, Samuel Schwab, Erin Sheridan, Matthew D. LaHaye
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE70 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-11378

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Transmon Architecture for Emission and Detection of Single Microwave Photons Daniel L. Campbell, Stephen McCoy, Melinda Andrews, Alexander Madden, Viva R. Horowitz, Bakir Husremović, Samuel Marash, Christopher Nadeau, Man Nguyen, Michael Senatore, Samuel Schwab, Erin Sheridan, Matthew D. LaHaye Abstract We showcase the recently developed double transmon coupler (DTC) circuit as a compact, drop-in, tunable and transition-selective link between an otherwise coherent transmon and the continuum of modes in a waveguide. We use these transmon-DTC devices as transmon emitter/dectectors (TEDs) for microwave photons. We highlight the flexibility of these devices by sending photons from a source TED to a measurement TED using a meter of coaxial cable and a circulator, each TED with nominally identical circuit parameters. We detect 60 % 60\,\% of the photons using this setup where we infer that 95 % 95\,\% of the photons at the input of the measurement TED are detected. Reset and photon emission/detection each require about 2 ​ μ 2\,\mu s, for a minimum protocol duration of 4 ​ μ 4\,\mu s, for our choice of TED parameters. Transmon-waveguide links like the DTC serve an important role in quantum information processors: they provide a mechanism for unconditional fast reset, metrology, and as nascent quantum communication interfaces for quantum networking. I Introduction Figure 1: (a) CAD file illustrating the transmon emitter/detector (TED) layout and (b) equivalent circuit for the TED where we index between two TEDs: x\in\{s,m\} . Transmon Q_{dx} (red) is designed for long term storage while Q_{wx} (green) strongly couples to a waveguide. Q_{cx} (purple) and Q_{wx} comprise a double transmon coupler (DTC). Flux line \phi_{px} biases and sinusoidally drives the DTC to mediate interactions between Q_{dx} and Q_{wx} . (c) Flux tunability with \phi_{pm} of the measurement TED’s (mTED’s) Q_{cm} and Q_{wm} transitions. Q_{wm} was measured using backscatter while Q_{cm} was measured using two-tone spectroscopy. The red dash-dot line is a guide to the eye showing Q_{dm} ’s transition, which only varies on the \sim 10 MHz scale. (d) Depiction of emission-detection setup. A source TED (sTED) is connected to the mTED via 1 meter of coaxial cable, a 10 dB directional coupler, and a circulator. The coupler and circulator allow backscatter measurements of Q_{wx} , which does not have an independent read-out resonator. Q_{dx} and Q_{cx} are capacitively coupled with amplitude g_{Cx} while Q_{cx} and Q_{wx} are inductively coupled with amplitude g_{Lx} . \gamma_{x} is the rate Q_{wx} relaxes into its waveguide. Networking physically separate quantum processing units (QPUs) is an attractive approach for scaling quantum computers 12 ; 30 ; 45 ; 27 , enabling remote quantum computation, and leveraging quantum advantage in networks of distributed sensors 43 . Superconducting circuits can exhibit strong near-field interactions with one-dimensional waveguides, enabling the high fidelity creation 24 ; 7 ; 44 ; 48 ; 52 ; 29 , capture 37 ; 22 ; 9 ; 3 ; 2 ; 46 , and detection 11 ; 33 ; 26 ; 32 ; 6 ; 40 ; 4 ; 50 ; 47 ; 49 of single microwave photons. These are essential functionalities of a quantum communication interface (QCI) architecture, analogous to classical serial network interfaces. An effective QCI for a transmon quantum computing architecture would ideally also be compact, operate programmably in both transmitter and receiver modes, support a broad range of microwave frequencies, provide isolation to prevent QPU decoherence, and allow for selective entanglement with the host QPU. Here we demonstrate a compact, frequency tunable, and transmon compatible QCI, a transmon emitter/detector (TED). The TED mediates time-dependent interactions between a well-isolated long-lived transmon qubit memory and the modes of a coplanar waveguide. As we highlight in this paper, the versatile TED circuit can be used to release, capture, and detect itinerant microwave photons. In this work we showcase two TED devices indexed x\in\{s,m\} : one to source ‘ s ’ and the other to measure ‘ m ’ microwave photons (Fig. 1 ). The TED expands on the recently developed double transmon coupler (DTC) 10 ; 35 ; 41 ; 36 architecture, developed independently by Toshiba and the Air Force Research Laboratory (AFRL). The DTC consists of two transmons, Q_{cx} and Q_{wx} , linked by an inductive Josephson junction. The TED adds a third “data” transmon Q_{dx} which is capacitively coupled to Q_{cx} , as shown in Fig. 1 a-b. This setup isolates Q_{dx} from the waveguide environment, which is strongly coupled to Q_{wx} located on the other side of the DTC. (See Appendix A for chip fabrication information.) The frequency of Q_{wx} then sets the energy of photons emitted/detected by the TED, while the relaxation rate \gamma_{x} of Q_{wx} to the waveguide sets the maximum TED bandwidth. Modulating the DTC flux hybridizes Q_{wx} and Q_{dx} , operating the TED, while Q_{cx} is far off resonance. In a different context, a DTC was used to demonstrate a high fidelity controlled-Z gate between two data transmons 41 , where the DTC passively suppressed spurious \sigma_{z}\sigma_{z} interactions between data transmons in the DTC’s off configuration. The frequencies and coupling of transmons Q_{cx} and Q_{wx} tune approximately equally in magnitude with flux applied to the DTC’s superconducting quantum interference device (SQUID), analytically described in Ref. 10 and illustrated in Fig 1 c. Q_{dx} ’s lifetime is independent of the DTC flux and protected from the waveguide if Q_{dx} ’s frequency is sufficiently different from Q_{wx} ’s. Instead, static flux on the DTC primarily tunes Q_{wx} ’s frequency over a range of several hundred MHz, shown in Fig. 1 c. An exchange interaction between Q_{dx} and the waveguide is then readily established by resonantly driving the DTC flux at the difference or sum of Q_{dx} and Q_{wx} ’s frequencies. The several hundred MHz usable frequency tuning range for the TED-waveguide interactions relaxes parameter setting requirements for entanglement distribution between chips and other heterogeneous components. Similarly, the static frequency of Q_{d} is compatible with the restrictive frequency setting requirements of most transmon QPUs. This work and Ref. 6 both create and detect a Fock state. Sources, receivers, and detectors that use cavities have limited waveguide frequency tunability 24 ; 44 ; 40 ; 4 ; 31 ; 46 ; 47 . Other architectures have similar waveguide tunability while requiring Q_{d} and Q_{w} to have similar frequencies 29 ; 2 ; 18 ; 7 or are not based on a transmon architecture 11 ; 26 ; 50 ; 49 . It is unclear whether Ref. 7 and its successors can operate with Q_{d} and Q_{w} separated by multiple gigahertz in frequency. This separation is not only possible, but preferable, with a TED. To highlight the flexibility of the TED circuit we use TEDs with identical circuit parameters, operated differently, for a pitch-detect demonstration between remote transmons. One TED acts as a single microwave photon Fock source, and a second TED acts as a windowed classical microwave photon detector for that source. The two chips are linked by a coaxial cable interrupted by a circulator. The circulator enforces a continuum of modes in the waveguide and retrieves the outgoing waveform as shown in Fig. 1 a-d. We then compare the operation of the windowed microwave photon detector under Fock state versus coherent state illumination. This paper is structured

Read the complete text