Controlled epitaxy of room-temperature quantum emitters in gallium nitride
Katie M. Eggleton, Joseph K. Cannon, Sam G. Bishop, John P. Hadden, Chunyu Zhao, Menno J. Kappers, Rachel A. Oliver, Anthony J. Bennett · 2026
Read Controlled epitaxy of room-temperature quantum emitters in gallium nitride by Katie M. Eggleton, Joseph K. Cannon, Sam G. Bishop, John P. Hadden, Chunyu Zhao, Menno J. Kappers, Rachel A. Oliver, Anthony J. Bennett (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-11309.txt.
Introduction
Katie Eggleton and seven coauthors grow quantum light sources in gallium nitride. Their 2026 preprint reports controlled epitaxy of the emitters. Quantum light made at room temperature is a prized goal. A mature chip platform would make such sources cheap and common.
The team grows gallium nitride on silicon wafers for the work. That pairing can use known skill and wafer-scale lines. Bright emitters in this material can sit in cavities. They can also sit in diodes and photonic circuits. Controlled growth means the emitters land where they are wanted. That control is what turns a lab effect into a device. The work is a step toward quantum tech on plain silicon.
Catalog record
| CREATOR | Katie M. Eggleton, Joseph K. Cannon, Sam G. Bishop, John P. Hadden, Chunyu Zhao, Menno J. Kappers, Rachel A. Oliver, Anthony J. Bennett |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-11309
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Controlled epitaxy of room-temperature quantum emitters in gallium nitride Preprint: AIP/123-QED Katie M. Eggleton, Joseph K. Cannon, Sam G. Bishop, John P. Hadden, Chunyu Zhao, Menno J. Kappers, Rachel A. Oliver, Anthony J. Bennett Abstract The ability to generate quantum light at room temperature on a mature semiconductor platform opens up new possibilities for quantum technologies. Heteroepitaxial growth of gallium nitride on silicon substrates offers the opportunity to leverage existing expertise and wafer-scale manufacturing, to integrate bright quantum emitters in this material inside cavities, diodes and photonic circuits. Until now it has only been possible to grow GaN quantum emitters at uncontrolled depths on sapphire substrates, which is disadvantageous for potential device architectures. Here we report a method to produce GaN quantum emitters by metal-organic vapor phase epitaxy at a controlled depth in the crystal through application of a silane treatment and subsequent growth of 3D islands. We demonstrate this process on highly technologically relevant silicon substrates, producing room-temperature quantum emitters with a high Debye-Waller factor and strongly anti-bunched emission. I Introduction Solid-state quantum emitters (QEs) are essential components for emerging quantum technologies Atatüre et al. 2018 ; Awschalom et al. 2018 , such as quantum communications Bhaskar et al. 2020 , quantum sensors Aslam et al. 2023 and quantum computing Kimble 2008 ; Childress and Hanson 2013a . There is a growing interest in room-temperature QEs that can be implemented in practical and scalable materials. Quantum emitters based on impurity-vacancy complexes in diamond Kurtsiefer et al. 2000 ; Childress and Hanson 2013b ; Hepp et al. 2014 , hexagonal boron nitride Gottscholl et al. 2020 ; Plo et al. 2025 , silicon carbide Klimov et al. 2014 ; Castelletto et al. 2014 and silicon Johnston et al. 2024 ; Durand et al. 2021 ; Beaufils et al. 2018 ; Higginbottom et al. 2022 have been extensively studied, and many have demonstrated anti-bunching at room temperature. Wurtzite nitrides are a promising material platform for quantum technology owing to the extensive existing knowledge of their epitaxy and a proven array of device architectures developed for commercial applications in lighting and power electronics. QEs in gallium nitride (GaN) Berhane et al. 2017 ; Bishop et al. 2022 and aluminum nitride (AlN) Xue et al. 2020 ; Bishop et al. 2020 are optically stable and emit across a wide spectral range (from visible to near-IR). GaN has demonstrated bright QEs with a high fraction of emission occurring through the zero-phonon line Bishop et al. 2022 as quantified by the Debye-Waller (DW) factor. Some GaN QEs have been reported to emit at telecommunications wavelengths Zhou et al. 2018 though it is not known if these have the same origin as QEs seen in the 600\text{\,} to 900\text{\,}\mathrm{nm} range. Recent reports have shown that QEs in GaN have spin-linked energy levels that make them amenable to optically detected magnetic resonance spectroscopy Luo et al. 2024 ; Eng et al. 2025 . Their high brightness and single-photon purity has also led to GaN QEs being integrated into prototype quantum communication links Zhang et al. 2025 . Figure 1: Controlled growth of GaN quantum emitters on silicon. a) Illustration of the sample stack. b) Confocal fluorescence scan map of sample, collected in the spectral range 550 to 1000\text{\,}\mathrm{n}\mathrm{m} . c, d) Room-temperature photoluminescence spectra of a typical AlN QE in this sample and the GaN QEs, marked in b), respectively. The inset in d) is a second-order correlation measurement of QE3, marked by an asterisk in d). The dominant commercial technology for growth of III-nitrides is metal-organic vapor phase epitaxy (MOVPE) on sapphire, silicon carbide or silicon substrates Krost and Dadgar 2002 ; Zhu, Wallis, and Humphreys 2013 , the latter of which are commercially available on 300\text{\,}\mathrm{mm} wafers. Owing to the ‘melt-back’ etching of silicon (111) by the gallium precursor Zhu, Wallis, and Humphreys 2013 , the epilayer is often initiated with an AlN layer before gradually increasing the Ga-content of the film. We have previously shown that AlN growth on Si results in emission from single AlN QEs with phonon-broadened spectra extending from 600\text{\,} to 900\text{\,}\mathrm{nm} . At room temperature, these AlN QEs have a low Debye-Waller factor Cannon et al. 2024 and unknown spin-physics. We have also shown that QEs in AlN epilayers, grown on both sapphire and silicon substrates, preferentially form in the first few tens of nm of AlN growth Yağcı et al. 2024 . This corresponds to the formation of QEs in a highly dislocated and unintentionally doped initial layer. It would be advantageous to grow GaN QEs in a controlled manner and to achieve precise control over the depth of formation, enabling integration in optical cavities, opto-electronic devices and quantum sensing at surfaces. In this work, we report an epitaxial process for the low-density growth of QEs at a controlled depth away from the highly-defective epilayer-substrate interface region by mimicking the conditions in which GaN QEs form at the sapphire-GaN interface. We demonstrate this process via growth of stable, high DW-factor GaN QEs emitting at room temperature on silicon. Correlative optical intensity and micro-structural data reveals QEs located in the sparse 3D islands of GaN grown on a treated GaN surface. We also show that overgrowth of these QEs with a planar layer of GaN, which is essential for device applications, preserves the buried QEs. We confirm the GaN QEs are located only at the intended depth within the GaN layer via controlled etching of the epitaxial stack. Thus, we report that integration of QEs in GaN-on-silicon is possible with precise control of their depth, offering an attractive platform for room-temperature quantum light sources and sensors. II Results Figure 1 shows a sample design we have developed to grow QEs at arbitrary depth in a GaN layer. We employ a 1\text{\,}\mathrm{mm} thick n-type Si (111) substrate of 150\text{\,}\mathrm{mm} diameter on which epitaxy is initialized with the growth of a nominal thickness of approximately 250\text{\,}\mathrm{nm} AlN. Growth proceeds with a compositionally-graded 1.7\text{\,}\mathrm{\SIUnitSymbolMicro m} AlGaN layer with increasing Ga content, then a 1.0\text{\,}\mathrm{\SIUnitSymbolMicro m} GaN buffer layer (total epitaxy height of 3.0\text{\,}\mathrm{\SIUnitSymbolMicro m} ). This GaN-on-Si pseudo-substrate was then cleaved into 3 \times 3\text{\,}{\mathrm{cm}}^{2} pieces and the regrowth on each piece was started with a 500\text{\,}\mathrm{nm} GaN connecting layer. At this point the GaN surface was treated with silane (SiH 4 ) and ammonia (NH 3 ) for 720\text{\,}\mathrm{s} which forms a thin layer of SiN x similar to what is created during the initial nitridation of sapphire before GaN growth Yaddanapudi et al. 2018 ; Haffouz et al. 1999 . A GaN layer equivalent to 10 nm thickness, which form islands in the SiNx layer pinholes, is then deposited at low temperature and annealed in ammonia at 1020 C. We show here this layer contains QEs. Finally, this layer is overgrown with 3.0\text{\,}\mathrm{\SIUnitSymbolMicro m} of GaN to prevent QE instability from reactions with air and surface charges. 3.0\text{\,}\mathrm{\SIUnitSymbolMicro m} was used to ensure a planarized surface. There are approximately 10^{-3} emitters per 10\text{\,}\mathrm{nm} of spectral bandwidth per square micron. The completed epilayer stack is shown schematically in Fig. 1 (a). Room-temperature confocal laser-scanning photoluminescence (PL) measurements of the complete epitaxial stack reveal a distribution of point-like emitters, as highlighted in Fig.