Scalable mm-Wave Liquid Crystal Reconfigurable Intelligent Surfaces based on the Delay Line Architecture
Julia Schwarzbeck * , Robin Neuder * , Marc Späth, Alejandro Jiménez-Sáez † \dagger · 2026
Read Scalable mm-Wave Liquid Crystal Reconfigurable Intelligent Surfaces based on the Delay Line Architecture by Julia Schwarzbeck * , Robin Neuder * , Marc Späth, Alejandro Jiménez-Sáez † \dagger (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-11307.txt.
Introduction
Julia Schwarzbeck, Robin Neuder, Marc Spath, and Alejandro Jimenez-Saez build smart surfaces. Their 2026 preprint deals with surfaces that steer millimeter waves. The surfaces work near 60 GHz, a high band for fast links. Liquid crystal layers let each element shift the wave's phase.
The design uses a delay line layout for the elements. That layout splits the phase layer from the radiating layer. The split gives wide bandwidth for the whole surface. Phase control runs past a full 360 degrees in smooth steps. The liquid crystal film is just 4.6 micrometers thin. Arrays scale up to 750 radiating elements in this work. Such surfaces could steer beams in future indoor networks.
Catalog record
| CREATOR | Julia Schwarzbeck * , Robin Neuder * , Marc Späth, Alejandro Jiménez-Sáez † \dagger |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 34 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-11307
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Scalable mm-Wave Liquid Crystal Reconfigurable Intelligent Surfaces based on the Delay Line Architecture Julia Schwarzbeck * , Robin Neuder * , Marc Späth, Alejandro Jiménez-Sáez † \dagger Abstract This paper presents the design, fabrication, and characterization of broadband liquid crystal (LC) reconfigurable intelligent surfaces (RIS) operating around 60 GHz and scaling up to 750 radiating elements. The RISs employ a delay line architecture (DLA) that decouples the phase shifting and radiating layer, enabling wide bandwidth, continuous phase control exceeding 360°, and fast response times with a micrometer-thin LC layer of 4.6 µm. Two prototypes with 120 and 750 elements are realized using identical unit cells and column-wise biasing. Measurements demonstrate beam steering over ± \pm 60° and -3 dB bandwidths exceeding 9% for both apertures, confirming the scalability of the proposed architecture. On top of a measured nanowatt power consumption per unit cell, aperture efficiencies above 20% are predicted by simulations. While the measured efficiencies are reduced to 9.2% and 2.6%, a detailed analysis verifies that this reduction can be attributed to technological challenges in a laboratory environment. Finally, a comprehensive comparison between the applied DLA-based LC-RIS and a conventional approach highlights the superior potential of applied architecture. \IEEEilabelindentA \IEEEilabelindent \IEEEilabelindentA \IEEEelabelindent \IEEEdlabelindent \@IEEEabskeysecsize Keywords — \@IEEEgobbleleadPARNLSP RIS, liquid crystal, mm-Wave, reflectarray. I Introduction An earlier version of this paper was presented at EuMW 2025 and was published in its Proceedings [ 13 ] . In the context of future communication standards, such as 6G and beyond, reconfigurable intelligent surfaces (RISs) have emerged as a solution for enabling reliable signal transmission with low latency and high data rates [ 11 ] , [ 2 ] . These tunable surfaces promise to overcome challenges at millimeter wave (mm-Wave) and terahertz (THz) frequencies, addressing the issue of limited signal coverage due to high path loss, increased absorption, and reduced scattering. RIS can be envisioned as tunable reflectarrays, but without a defined feed. They consist of an array of radiating elements arranged in a grid, along with a tuning mechanism that enables dynamic control of wave propagation. In the far field, RIS can redirect electromagnetic waves toward desired directions, while in the near field, they can also focus waves on focal points. Fig. 1 shows an outdoor scenario. Large-scale RIS , consisting of hundreds, thousands, or even millions of elements, are envisioned for future applications [ 1 ] , [ 26 ] . Most commonly, semiconductor-based tuning mechanisms, such as PIN [ 3 ] and varactor diodes [ 16 ] , are used. While these technologies are readily available up to mm-Wave frequencies, they come with drawbacks, particularly in terms of power consumption and cost: Given that at least one diode is required per radiating element, semiconductor-based RIS quickly become prohibitively expensive as the array size increases [ 6 ] . Fig. 1: Exemplary outdoor scenario for a RIS [ 13 ] . The different colors in the RIS qualitatively indicate different reflected phase at the radiating elements. LoS: Line of sight. RIS: Reconfigurable intelligent surface. Fig. 2: Design and simulation results of the proposed LC - RIS [ 13 ] . a) Operation principle of the delay line architecture, the unit cell layout and the side view of the LC-RIS. b) Performance of the phase shifter in terms of losses (FoM) and compactness. The red dotted line indicates a compactness of 360\text{\,}\mathrm{\SIUnitSymbolDegree} . c) Simulated aperture efficiency \mathrm{\eta_{Co}} in a 768 ( \mathrm{32\times 24} ) element RIS. LC: Liquid crystal. RIS: Reconfigurable intelligent surface. FoM: Figure of Merit. \theta_{\mathrm{r}} : reflected angle. A promising alternative tuning mechanism is nematic LC [ 7 ] . Although it presents challenges such as moderate insertion losses, relatively slow response times, and temperature dependence, it also offers significant advantages. These include continuous tunability, transparency, low power consumption, and, most notably, large-scale scalability, making it a promising candidate for RIS applications. In [ 14 ] , the delay line architecture (DLA) was proposed for LC - RIS . In contrast to conventional architectures relying on the detuning of a resonant element, called resonant architecture (RA) , the DLA couples the incoming electromagnetic wave to a tunable LC -based phase shifter before retransmitting it into free space. The DLA allows LC - RIS to be optimized for low loss, fast response time, and wide bandwidth simultaneously. In [ 14 ] , a DLA -based LC - RIS operating around 60\text{\,}\mathrm{GHz} is presented. The proposed LC - RIS is composed of 120 (12 \times 10) tunable unit cell elements. To demonstrate the scalability of the LC - RIS towards larger apertures, this paper extends the concept to an array with 750 (25 \times 30) elements, based on the same unit cell design. The paper is structured as follows: First, the design of the proposed LC - RIS and its simulation results are presented. Subsequently, measurement results of the manufactured LC - RIS prototypes are evaluated. Thereby, the steering capabilities, the power consumption and the response time are analyzed. Further, a measurement procedure for the aperture efficiency is proposed and the impact of fabrication tolerances are modeled. Finally, the prototypes are compared to recent LC - RIS realizations to contextualize the potential of the DLA in comparison to the conventional RA . II Design and simulation results The operating principle of the proposed LC- RIS is illustrated in Fig. 2 a). The setup consists of three main materials: the LC mixture, a glass substrate, and a conductor. An electromagnetic wave propagating in free space impinges on the aperture-coupled patch antenna, which couples the wave to an LC-based phase shifter through the slot. The wave propagates through the phase shifter to its open end, where the wave is reflected and subsequently re-radiated by the patch antenna. The unit cell elements are arranged in a triangular grid to facilitate sufficient space for the phase shifters. An element spacing \leq 0.5\lambda_{0} is targeted to fully avoid the appearance of grating lobes, with \lambda_{0} being the free-space wavelength. The ellipsoidal shape of LC molecules allows continuous permittivity tuning via bias voltages, which control the orientation of the molecule director \mkern 2.0mu\textstyle\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraitd}$}}{{}\hbox{$\textstyle{\montraitd}$}}{{}\hbox{$\scriptstyle{\montraitd}$}}{{}\hbox{$\scriptscriptstyle{\montraitd}$}}}\mkern-1.5mu\leaders{\hbox{$\textstyle\mkern 0.0mu\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraita}$}}{{}\hbox{$\textstyle{\montraita}$}}{{}\hbox{$\scriptstyle{\montraita}$}}{{}\hbox{$\scriptscriptstyle{\montraita}$}}}\mkern 0.0mu$}}{\hfill}\mkern-1.5mu\fldr \hfil\textstyle n\hfil relative to the radio frequency (RF) electric field \mathrm{\mathchoice{\vbox{\halign{#\cr\kern-0.7pt\cr$\mkern 2.0mu\displaystyle\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraitd}$}}{{}\hbox{$\textstyle{\montraitd}$}}{{}\hbox{$\scriptstyle{\montraitd}$}}{{}\hbox{$\scriptscriptstyle{\montraitd}$}}}\mkern-1.5mu\leaders{\hbox{$\displaystyle\mkern 0.0mu\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraita}$}}{{}\hbox{$\textstyle{\montraita}$}}{{}\hbox{$\scriptstyle{\montraita}$}}{{}\hbox{$\scriptscriptstyle{\montraita}$}}}\mkern 0.0mu$}}{\hfill}\mkern-1.5mu\fldr$\crcr\kern-0.3pt\cr$\hfil\displaystyle E\hfil$\crcr}}}{\vbox{\halign{#\cr\kern-0.7pt\cr$\mkern 2.0mu\textstyle\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraitd}$}}{{}\hbox{$\textstyle{\montraitd}$}}{{}\hbox{$\scriptstyle{\montraitd}$}}{{}\hbox{$\scriptscriptstyle{\montraitd}$}}}\mkern-1.5mu\leaders{\hbox{$\textstyle\mkern 0.0mu\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraita}$}}{{}\hbox{$\textstyle{\montraita}$}}{{}\hbox{$\scriptstyle{\montraita}$}}{{}\hbox{$\scriptscriptstyle{\montraita}$}}}\mkern 0.0mu$}}{\hfill}\mkern-1.5mu\fldr$\crcr\kern-0.3pt\cr$\hfil\textstyle E\hfil$\crcr}}}{\vbox{\halign{#\cr\kern-0.7pt\cr$\mkern 2.0mu\scriptstyle\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraitd}$}}{{}\hbox{$\textstyle{\montraitd}$}}{{}\hbox{$\scriptstyle{\montraitd}$}}{{}\hbox{$\scriptscriptstyle{\montraitd}$}}}\mkern-1.5mu\leaders{\hbox{$\scriptstyle\mkern 0.0mu\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraita}$}}{{}\hbox{$\textstyle{\montraita}$}}{{}\hbox{$\scriptstyle{\montraita}$}}{{}\hbox{$\scriptscriptstyle{\montraita}$}}}\mkern 0.0mu$}}{\hfill}\mkern-1.5mu\fldr$\crcr\kern-0.3pt\cr$\hfil\scriptstyle E\hfil$\crcr}}}{\vbox{\halign{#\cr\kern-0.7pt\cr$\mkern 2.0mu\scriptscriptstyle\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraitd}$}}{{}\hbox{$\textstyle{\montraitd}$}}{{}\hbox{$\scriptstyle{\montraitd}$}}{{}\hbox{$\scriptscriptstyle{\montraitd}$}}}\mkern-1.5mu\leaders{\hbox{$\scriptscriptstyle\mkern 0.0mu\mathrel{\mathchoice{{}\hbox{$\displaystyle{\montraita}$}}{{}\hbox{$\textstyle{\montraita}$}}{{}\hbox{$\scriptstyle{\montraita}$}}{{}\hbox{$\scriptscriptstyle{\montraita}$}}}\mkern 0.0mu$}}{\hfill}\mkern-1.5mu\fldr$\crcr\kern-0.3pt\cr$\hfil\scriptscriptstyle E\hfil$\crcr}}}_{RF}} [ 7 ] . With the applied LC -mixture GT7-29001 from Merck Electronics KGaA, Darmstadt, Germany, the permittivity can be tuned between \mathrm{\varepsilon_{r,LC,\perp}}=2.46 with \mathrm{tan\delta_{LC,\perp}}=0.0116 and \mathrm{\varepsilon_{r,LC,\parallel}}=3.53 with \mathrm{tan\delta_{LC,\parallel}}=0.0064 [ 4 ] . For the glass substrate, AF32 from Schott is used ( \mathrm{\varepsilon_{r,AF32}}=5.1 and \mathrm{tan\delta_{AF32}}=0.009 at 24\text{\,}\mathrm{GHz} [ 18 ] ) and gold is employed as the conductor. To maximize the phase shift per length and minimize the insertion losses, a defected ground structure inverted microstrip line (DGS-IMSL) topology is employed. The topology is well-suited for RIS applications [ 15 ] which require low insertion loss, fast response time, high compactness, and wide bandwidth. The simulated characteristics of the LC phase shifter are presented in Fig. 2 b). The figure of merit (FoM) and the compactness are defined as: \displaystyle\mathrm{\lx@glossaries@gls@link{acronym}{FoM}{{{}}FoM}} \displaystyle}{\displaystyle=\frac{\Delta\phi_{\mathrm{max}}}{\mathrm{IL_{max}}}\qquad\mathrm{Compactness} \displaystyle{}=\frac{\Delta\phi_{\mathrm{max}}\,\lambda_{0}}{l_{\mathrm{phys}}} (1) where \mathrm{\Delta\phi_{\mathrm{max}}} , \mathrm{IL_{\mathrm{max}}} and l_{\mathrm{phys}} represent the phase shifter’s max. differential phase shift, max. insertion loss and physical length,