Compositional and morphological study of a Nuragic bronze figurine with neutron diffraction and neutron tomography
P. Oliva · 2026
Read Compositional and morphological study of a Nuragic bronze figurine with neutron diffraction and neutron tomography by P. Oliva (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-11288.txt.
Introduction
P. Oliva studies an old bronze figure from Sardinia with neutron beams. The 2026 preprint looks at a Nuragic figurine in close detail. Nuragic figures are rare works of early Iron Age craft. Sardinian smiths made them with great skill for their time.
The figures were most likely cast by the lost wax method. Wax shapes melt out and leave a mold for the bronze. That method lets even complex forms be cast with ease. Oliva uses two neutron tools to peer inside the bronze. Diffraction reads the mix and strain of the metal. Tomography builds a 3D view of the inner form. Both tools leave the rare piece whole and unharmed.
Catalog record
| CREATOR | P. Oliva |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 16 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-11288
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Compositional and morphological study of a Nuragic bronze figurine with neutron diffraction and neutron tomography P. Oliva Abstract Nuragic figurines are rare and unique examples of the mastery achieved by Sardinian craftsmen in the early Iron Age. These bronze artefacts were most likely cast using the lost wax technique: the shapes were moulded with relative ease, and even complex figures could be represented. However, the manufacturing process was not always a single-step solution: in some cases, the parts of the model were moulded separately and then assembled in a second place. The analytical study of these artefacts can help to understand the specific casting methods and to evaluate the techniques implemented by Sardinian craftsmen to produce such complex objects. In recent years, neutron diffraction (ND) and neutron imaging (NI) have proven to be among the most effective methods for non-invasive studies. ND and NI provide complementary quantitative and morphological information that can be the key to understanding the casting processes. In this work, the results of the analysis of a bronze figurine will be reported. The statuette represents a Nuragic warrior and was made available by the Soprintendenza Archeologia Belle Arti e Paesaggio per le province di Sassari e Nuoro (Sassari, Italy). 1 Introduction Figure 1 : The warrior statuette. Born in Sardinia in the late Bronze Age, the Nuragic Culture is recognised worldwide for its astonishing artistic and architectural production. From the Nuraghi - stone towers that still shape the island landscape to this day - to ceramic, stone and metallic artefacts, Sardinian craftsmen achieved an unmatched level of control of many manufacturing processes. In the late Nuragic period (X-VIII century BC), the metallic production is characterised by the creation of bronze artefacts of exceptional quality. From objects of everyday use to small statuettes representing complex scenes, the Nuragic culture mastered the art of bronze making. However, a unique trait of the metallic production is that, besides the large number of artefacts, there is very little evidence of the manufacturing methods. Remains of metallic workshops, like furnaces, crucibles or moulds, are very rare in archaeological excavations [ 10 ] . Therefore, the study of these artefacts becomes essential for understanding the production process. In the last few years, neutron-based techniques have emerged as among the most appropriate and effective methods for studying metallic artefacts. Based on the use of a totally non-invasive probe, neutron methods (namely neutron diffraction and imaging) have been applied in many works to obtain qualitative and quantitative bulk information [ 2 , 6 , 4 ] . The results of these experiments have helped scientists and historians to shed light on the manufacturing processes and in understanding the history, commercial routes and contaminations of this unique culture. In this work, the results of the study of a small bronze figurine are reported. The statuette represents a lightly armed warrior (Fig.1), found during the archaeological excavation in Cuccuru Mudeju , a small site in the north of Sardinia ( Nughedu San Niccolò ). The sample belongs to the collection of the Soprintendenza Archeologia Belle Arti e Paesaggio per le province di Sassari e Nuoro (Sassari, Italy). It is a male figure with a horned helmet and braids, with a sword placed on the left shoulder. A small rope connects the sword with a circular shield with radial motifs, while on the chest is placed a small gamma-shaped hilt dagger, a symbol of adulthood. The right hand of the warrior has four fingers united, a symbol of ritual salutations. Finally, the warrior’s open legs end in a small pin, which is believed to be the fusion channel as well as an aid to set the warrior still. The warrior iconography refers to heroic virtues and power, an important aspect of the Nuragic civilisation and most likely served as an offering to Deities. After the excavation, the warrior has been restored in the restoration centre of Li Piunti (Sassari, Italy). The right horn, the sword and the left arm were fragmented. The restoration integrated the missing pieces with Araldite, an epoxy resin. In addition, the classic bronze superficial alterations were cleaned, and the warrior is now in a good state of conservation. 2 Methods Neutrons are an invaluable probe for the analysis of archaeological artefacts: they are non-destructive and can penetrate deep to give access to bulk properties of a material. They can reveal structures at the microscopic scale, provide phase composition, 3D images of the inner parts of the artefacts and elemental and isotopic mapping. For Heritage Science applications, they can be used to answer the most typical archaeometry questions. Neutrons can help researchers to understand the manufacturing methods, the composition, the morphology and the conservation status of a given artefact. For this reason, the warrior was analysed by means of time-of-flight neutron diffraction (Tof-ND) and neutron imaging (NI). Experiments were performed in November 2023 at the ISIS Neutron and Muon Source, a world-leading research facility for physical and life sciences based in Oxfordshire. Tof-ND was performed at INES Station (Italian Neutron Experimental Station), while NI at the IMAT (Imaging and MATerials science) imaging station. In the next paragraphs, a brief description of the experimental apparatus is reported. 2.1 Neutron Diffraction The INES beam line is a general-purpose time-of-flight neutron diffractometer. The instrument is equipped with 3 He detectors to detect neutrons, covering a scattering angle range of about 158°. Detectors are placed at a fixed scattering angle: when Bragg’s law is satisfied, the obtained diffraction figures reflect the position of atoms in a solid. With a neutron diffraction measurement, it is possible to determine the weight percentages of crystal phases present in the sample, the alloy composition, the texture (i.e, preferred crystallite orientation), the crystallite size and the presence of residual stress (effect of mechanical working). To calculate the phase fractions, Rietveld refinement is used. The warrior was mounted on the INES sample area and measured in eight different areas, with a spot measurement of 25 or 100 mm 2 . The collected data were normalised with the Mantid software and analysed with the GSAS software through the EXPGUI interface [ 9 ] . For a more detailed description of the beamline, see [ 8 ] . 2.2 Neutron Imaging IMAT is a cold neutron imaging station designed for non-destructive imaging on a broad range of material science areas. In its current configuration, the instrument supports a field of view of 200x200 mm 2 for larger samples (with \sim 200 \mu m spatial resolution), while for smaller samples, a spatial resolution of 50-60 \mu m can be achieved. The experimental area is equipped with a rotation and translation stage, with a downstream camera for attenuation-based measurements. For a more detailed description of the beam line, see [ 5 ] . The neutron imaging investigation is crucial to get morphological details about a sample. The warrior was placed in a custom-made aluminium sample holder and irradiated for a few hours. Tomography measurements were performed using an Andor Zyla sCMOS camera (2048x2048 pixels) coupled to a ZnS/LiF scintillator providing a field of view of \sim 210x210 mm 2 and an effective pixel size at the scintillator of \sim 100 \mu m. The achievable spatial resolution is influenced by