Reply to “Comment on Nuclear Fusion 66, 016012 (2026) by Richard Fitzpatrick, A Simple Model of Current Ramp-Up and Ramp-Down in Tokamaks ” by A.H. Boozer

Richard Fitzpatrick · 2026

Read Reply to “Comment on Nuclear Fusion 66, 016012 (2026) by Richard Fitzpatrick, A Simple Model of Current Ramp-Up and Ramp-Down in Tokamaks ” by A.H. Boozer by Richard Fitzpatrick (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-10509.txt.

Introduction

Richard Fitzpatrick replies to a note on his model of tokamak current ramps. A tokamak holds hot plasma in a ring with fields. Its current must rise at the start and fall at the end. Fitzpatrick gave a plain model of those ramps. It was set out in a past paper in Nuclear Fusion.

A. H. Boozer wrote a note on that model. This report is Fitzpatrick's reply. He takes up the points Boozer raised. He sets out where he holds his ground and where terms need care. Such swaps are how plain models get honed for real rig use.

Catalog record

CREATORRichard Fitzpatrick
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE10 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-10509

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Reply to “Comment on Nuclear Fusion 66, 016012 (2026) by Richard Fitzpatrick, A Simple Model of Current Ramp-Up and Ramp-Down in Tokamaks ” by A.H. Boozer Richard Fitzpatrick Abstract This report is a follow up to my paper “A simple model of current ramp-up and ramp-down in tokamaks” [Nucl. Fusion 66 , 016012 (2026)] in the light of comments on the paper recently made by Dr. A.H. Boozer (arXiv:2601.05977). My recent paper “A simple model of current ramp-up and ramp-down in tokamaks” rf was inspired by a report authored by Dr. A.H. Boozer, entitled “Absolute constraints on the magnetic field evolution in tokamak power plants”, that was published on the arXiv.org repository on July 7, 2025. boozer . In this report, Dr. Boozer expresses skepticism that the ITER and SPARC design teams have fully taken into account the constraints on tokamak operation that are imposed by Faraday’s law, in particular with respect to the ramp-up and ramp-down of the plasma toroidal current. In Eqs. (31)-(32) of the report, Dr. Boozer estimates that, in the SPARC tokamak, the timescale for the free—that is, when the primary solenoid flux is held constant—decay of the plasma current from flattop conditions is 1157 seconds. In the second paragraph before giving this estimate, Dr. Boozer mentions that the SPARC design envisages ramping up the plasma current in 7 seconds, and ramping it down in 12 seconds, and complains that the SPARC team have not fully explained how this is possible. The implication of these widely differing timescales seems inescapable. If the timescale for the free decay of the current in SPARC really is 1157 seconds then any attempt to ramp-up the current on a timescale that is a factor of 100 times shorter than this would generate a hollow current profile that is highly unstable to kink modes, which would inevitably trigger a disruption. Likewise, any attempt to ramp-down the current on a similar timescale would generate a strongly peaked current profile that is highly unstable to tearing modes, which would again inevitably lead to a disruption. In an earlier paper, boozer1 Dr. Boozer seems to imply that an attempt to ramp-down the current in ITER on a timescale significantly faster than 1000 seconds would lead to a highly peaked tearing-unstable current profile. However, as noted in the paper, the ITER design envisages ramping down the current in 60 seconds. In fact, Dr. Boozer raises (or appears to raise) a very good point. Ramping the current up and down in a tokamak involves the diffusion of magnetic flux through the plasma. If the current ramp is substantial then the flux has to diffuse the whole way across the plasma. All plasma physics textbooks (including my own book ) state that the timescale for such flux diffusion is \tau_{R}=\frac{\mu_{0}\,a^{2}}{\eta}, (1) where a is the plasma minor radius, and \eta the mean electrical resistivity. However, a calculation of this timescale leads to absurdly large results. For example, a calculation of the timescale for JET (assuming a mean electron temperature of 7 keV) yields 400 seconds. Despite this, all JET discharges were able to ramp up the current, achieve a flattop for a significant fraction of the duration of the discharge, and ramp down the current again, in less than 40 seconds. Obviously, there is something seriously wrong with the above estimate. (In fact, the referees of my paper, who were clearly very knowledgeable physicists, and made many valuable suggestions for the improvement of the paper, were surprised by how badly the \tau_{R} estimate misses the mark.) My paper constructs a simple model for the current ramp-up and ramp-down process in an ohmically heated tokamak, with the ultimate aim of determining the minimum safe current ramp time. The ingredients of the model are uncontroversial. In addition to Maxwell’s equations, the model employs a plasma Ohm’s law that relates the induced plasma current density to the inductive electric field. The Ohm’s law involves the plasma resistivity, which is a strong function of the electron temperature. In order to determine the electron temperature profile, it is necessary for the model to incorporate a temperature evolution equation. The only heating source in an ohmic plasma is Joule heating, whose form is well known. However, we must also model the transport of electron energy. The transport of electron energy in tokamak plasma has been the subject of extensive research for the last 50 years. There is overwhelming evidence that such transport is diffusive in nature. In other words, the transport can be determined by specifying a diffusivity profile, \chi(r) . Empirical scaling laws lead to the conclusion that \chi\sim 1\,{\rm m^{2}/s} in next-generation tokamaks. Thus, we can make an educated guess as to the average diffusivity. The normalized diffusivity profile, \hat{\chi}(r)=\chi(r)/\chi_{\rm av} , is harder to guess. In my analysis, the solution of the electron transport equation reduces to a nonlinear eigenvalue problem, where the eigenvalue, \lambda , is a function of the normalized \hat{\chi}(r) profile. If \hat{\chi}(r) is uniform then \lambda=7.01 . If \hat{\chi}(r) increases outward in r (as is likely to be the case) then \lambda is less than this. However, the variation of \lambda with the \hat{\chi}(r) profile is fairly weak. In my paper, the numerical estimates are made for a uniform \hat{\chi}(r) profile. However, all of the relevant formulae in the paper are expressed as functions of \lambda . Thus, an interested reader who had a better model for the \hat{\chi}(r) profile could employ my eigenvalue equation to calculate an improved estimate for \lambda , and then use this estimate in my formulae. Once the electron transport equation has been solved, my system of equations is characterized by one unknown, which is the inductive electric field at the plasma boundary, E_{\phi} . Faraday’s law gives 2\pi\,R_{0}\,E_{\phi}=-\frac{d(\psi_{p}+\psi_{s})}{dt}, (2) where R_{0} is the plasma major radius, \psi_{p} the poloidal magnetic flux generated outside the plasma by the plasma current, and \psi_{s} the magnetic flux generated by the central solenoid. However, all modern tokamaks are equipped with sophisticated feedback control systems that effectively solve the previous equation in order to figure out what rate of change of the central solenoid flux is needed to generate a given E_{\phi} (or, to be more exact, a given plasma current). In other words, E_{\phi}(t) is effectively programmable. This being the case, we can work directly in terms of E_{\phi}(t) , without explicitly involving \psi_{p} . Of course, this makes perfect sense, because the plasma current profile is determined by the diffusion of magnetic flux through the plasma itself, rather than through the surrounding vacuum. A current ramp-up in a tokamak plasma is conventionally accompanied by a simultaneous increase in the plasma minor radius, and vice versa for a current ramp-down. My analysis shows that it is possible to effect a current ramp-up or ramp-down in which the safety factor profile is held constant provided that the plasma minor radius and E_{\phi}(t) are adjusted in a judicial fashion, and the ramp-up/ramp-down rate is smaller than a critical rate. Obviously, if the initial safety-factor profile is stable to kink and tearing modes then the plasma will remain stable to such modes throughout the current ramp. I find that the minimum safe ramp time is actually much

Read the complete text