Cloud parameter estimation for interacting BEC after time-of-flight Publication type: Paper
R. M. F. Andersen 1, S. Frederiksen 1, L. Stokholm 1, I. Zebergs 1, M. Kristensen 1, C. A. Weidner 2, J. J. Arlt 1 · 2026
Read Cloud parameter estimation for interacting BEC after time-of-flight Publication type: Paper by R. M. F. Andersen 1, S. Frederiksen 1, L. Stokholm 1, I. Zebergs 1, M. Kristensen 1, C. A. Weidner 2, J. J. Arlt 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-10415.txt.
Introduction
R. M. F. Andersen and co authors test how cloud traits are read from burst shots of cold atoms. A Bose Einstein cloud is a gas cooled till its parts act as one. Warm clouds mix a dense core with a loose halo. A shot is taken as the cloud bursts free.
From the burst shape, labs read heat, atom count, and the dense share. The team ask how the push twixt core and halo warps that read. The core and halo shove each other as they grow. That shove can bias the halo shape. The work maps the bias so reads can be set right.
Catalog record
| CREATOR | R. M. F. Andersen 1, S. Frederiksen 1, L. Stokholm 1, I. Zebergs 1, M. Kristensen 1, C. A. Weidner 2, J. J. Arlt 1 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-10415
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Cloud parameter estimation for interacting BEC after time-of-flight Publication type: Paper R. M. F. Andersen 1, S. Frederiksen 1, L. Stokholm 1, I. Zebergs 1, M. Kristensen 1, C. A. Weidner 2, J. J. Arlt 1 Abstract Experiments on Bose-Einstein condensates at finite temperature typically extract the system parameters, such as temperature, atom number, and condensed fraction from time-of-flight images taken after a free expansion time. This paper systematically examines the effect of repulsive interactions between the condensed and thermal atoms in partially condensed clouds on the expansion profile of the thermal cloud. An analytical expression for the expansion can be obtained only if the interactions between the Bose-Einstein condensate and thermal atoms are neglected, resulting in a Bose-enhanced distribution for the thermal component. Here, the deformation of the cloud due to interactions and the effects on estimated parameters are investigated by simulating the expansion using a ballistic approximation. By fitting the simulated expansion profiles with a Bose-enhanced distribution, the errors of using such a fit are estimated, and the results are explained phenomenologically. The simulation was also used as a fitting function for experimental data, showing better agreement of the extracted condensed fraction with the semi-ideal model than results from a Bose-enhanced fit. 1 Introduction Absorption imaging has traditionally been one of the most important detection techniques in ultracold atomic physics and has played a central role in the observation and characterization of Bose–Einstein condensation [ 19 ] . Despite its widespread use, the accurate determination of system parameters remains a nontrivial challenge, with systematic uncertainties arising from both experimental and theoretical considerations [ 27 , 33 , 35 ] . Over the years, several variants of absorption imaging have been developed to mitigate these limitations [ 17 , 35 , 32 , 21 , 10 , 25 ] . In addition, partially destructive yet resonant techniques such as partial-transfer absorption imaging have been introduced, enabling repeated measurements of atomic clouds with reduced perturbation [ 26 ] . Generally, in absorption imaging, resonant light incident on the atomic cloud is absorbed, casting a shadow that can then be imaged on a camera. When taking in situ absorption images of trapped clouds of ultracold atoms, however, the optical densities are often too high for any meaningful amount of light to penetrate the cloud. Additionally, the small spatial extent of in-situ clouds requires special imaging optics for sufficient resolution. Consequently, the standard procedure is to release the cloud in free fall for a short time of flight prior to imaging. This results in an expansion of the cloud and thus a reduction in the optical density, allowing for more precise measurements. For a detailed discussion of absorption imaging analysis and noise estimation, see Ref. [ 27 , 33 , 35 ] . To extract precise information from absorption images, e.g., atom number and temperature, one typically needs a model for the cloud expansion in time-of-flight. This is a relatively simple problem for ideal gas clouds released from a harmonic trap [ 3 , 34 ] , which can be solved analytically and provides a good approximation in many cold atom experiments since the densities of the clouds are low enough for interactions to be negligible. However, when a bosonic gas approaches degeneracy and obtains a non-negligible Bose-Einstein condensate (BEC) component, a macroscopic number of atoms populate the ground state, resulting in a sharp increase in density. As a result, the ideal gas assumption breaks down, and atom-atom interactions must be taken into account. When one considers a cloud consisting of both Bose-condensed and thermal atoms, the thermal component can be approximated as an ideal gas, and often interactions between the two components are ignored, thus decoupling the BEC and the thermal atoms. However, the high-density condensed atoms, which break the ideal gas assumption, interact with all atoms, including the thermal atoms. This leads to a more complicated system where not even an approximate solution to free expansion is available analytically. In this paper, a numerical model is employed to estimate the effect of these interactions on the thermal cloud’s expansion, specifically considering two key parameters, temperature ( T ) and thermal atom number ( N_{th} ) [ 1 ] . The paper is structured as follows. Section 2 reviews the expansion of pure thermal clouds and pure BECs. The following section, Sec. 3 discusses the simulation of the expansion of partially condensed clouds, including the in-trap forces that arise when the condensed atoms interact with other atoms in the cloud. Section 4 discusses the errors that arise in typical absorption imaging when these interactions are not taken into account, and Section 5 shows that the model can be used to fit experimental data and extract more accurate temperatures and atom numbers. Section 6 concludes the paper. 2 Expanding pure thermal clouds and Bose-Einstein condensates This section provides a brief review of the free expansion of pure thermal clouds and pure BECs, as well as the fitting technique used to extract information from cloud images. It serves as an introduction to the necessary methods to model partially condensed clouds. 2.1 Freely Expanding Pure Thermal Cloud Non-interacting bosonic particles with mass m at temperature T and chemical potential \mu are described according to the Bose-Einstein distribution [ 29 ] \displaystyle n_{th}(\textbf{r},\textbf{p})=\frac{1}{\text{e}^{(\textbf{p}^{2}/2m+V(\textbf{r})-\mu)/k_{B}T}-1}, (1) where n_{th}(\textbf{r},\textbf{p}) is the average phase-space density of particles at position r and with momentum p in a trap potential V(\textbf{r}) . From now on, it is assumed that V(\textbf{r}) is harmonic with trap frequencies \omega_{i} . The spatial distribution n_{th} can be found by integrating over the momentum-space with volume element \mathrm{d}^{3}\textbf{p}/(2\pi\hbar)^{3} . Here, the interactions between atoms are neglected, and after being released from the trap, the expansion is ballistic. To find the density of atoms n_{th}(\textbf{r},t) , the probability of atoms arriving at r from all parts of the in-trap cloud after a time of flight t must be summed. This is accomplished by integrating over all momenta and calculating the initial position of an atom with each given momentum p that ends up at r , which is \textbf{r}-\textbf{p}t/m , giving \displaystyle n_{th}(\textbf{r},t) \displaystyle=\int\frac{\mathrm{d}^{3}\textbf{p}}{(2\pi\hbar)^{3}}\frac{1}{\text{e}^{(\textbf{p}^{2}/2m+V(\textbf{r}-\textbf{p}/m\cdot t)-\mu)/k_{B}T}-1} \displaystyle=\left(\frac{mk_{B}T}{2\pi\hbar^{2}}\right)^{3/2}g_{\frac{3}{2}}\left(\tilde{z}\text{e}^{-\sum_{i=1}^{3}x_{i}^{2}/2w_{i}^{2}}\right), (2) where g_{\frac{3}{2}} is the polylogarithm function defined by \displaystyle g_{\gamma}(x)=\sum_{i=1}^{\infty}\frac{x^{i}}{i^{\gamma}}, (3) and w_{i}(t)=\sigma_{i}\sqrt{1+\omega_{i}^{2}t^{2}} are the widths after time-of-flight with in-trap widths \sigma_{i}=\sqrt{\frac{k_{B}T}{m\omega_{i}^{2}}} and fugacity \tilde{z}=\exp(\mu/k_BT) . Equation ( 2.1 ) describes a Bose-enhanced Gaussian distribution, which is characterized by a sharp central peak for low temperatures. At high temperatures, only the first order of the polylogarithm function expansion contributes, and the distribution approaches a standard Gaussian distribution. 2.2 Freely Expanding Pure BEC The condensed part of the cloud is typically well described by the Gross-Pitaevskii equation [ 23 , 14 , 24 ] . The Thomas-Fermi approximation neglects the kinetic energy in the Gross-Pitaevskii equation, and provides a good approximation for the BEC density distribution in-trap. The regions where the approximation fails coincide with the lowest condensed atom densities (such as near T_{c} and on the cloud edge). In this approximation, the BEC density n_{0} of a condensed cloud with N_{0} atoms is given by [ 23 ] \displaystyle n_{0}(\textbf{r})=\frac{15}{8\pi}\frac{N_{0}}{R_{1}R_{2}R_{3}}\cdot\Theta\left(1-\sum_{i=1}^{3}\frac{\textbf{r}_{i}^{2}}{R_{i}^{2}}\right), (4) where \Theta is the Heaviside step function, R_{i}=\sqrt{2\mu/m\omega_{i}^{2}} are the Thomas-Fermi radii, and \mu is the chemical potential, which