Hybrid superinductance with Al/InAs

Junseok Oh, Ido Levy, Tyler Cowan, Jacob Issokson, Archana Kamal, Javad Shabani, Andrew P. Higginbotham · 2026

Read Hybrid superinductance with Al/InAs by Junseok Oh, Ido Levy, Tyler Cowan, Jacob Issokson, Archana Kamal, Javad Shabani, Andrew P. Higginbotham (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-10023.txt.

Introduction

Junseok Oh and co authors test chains of small links that join two stuffs. The links are Josephson links. They are made from a layer pair of aluminium on indium arsenide. Chains of such links can act as a large coil with no loss.

The chains show this large coil trait. Their wave load tops a key quantum bound. The flat form of the links gives a high base tone. The chain acts close to an ideal coil up to a high tone. Such coils matter for quantum chips. They can shield states and help form new kinds of bits.

Catalog record

CREATORJunseok Oh, Ido Levy, Tyler Cowan, Jacob Issokson, Archana Kamal, Javad Shabani, Andrew P. Higginbotham
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-10023

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Hybrid superinductance with Al/InAs Preprint: AIP/123-QED Junseok Oh, Ido Levy, Tyler Cowan, Jacob Issokson, Archana Kamal, Javad Shabani, Andrew P. Higginbotham Abstract We report microwave spectroscopy of Josephson junctions chains made from an epitaxial Al/InAs heterostructure. The chains exhibit superinductance, with characteristic wave impedance exceeding R Q = ℏ / ( 2 ​ e ) 2 R_{Q}=\hbar/(2e)^{2} . The planar nature of the junctions results in a large plasma frequency, with no measurable deviations from ideal dispersion up to 12 ​ GHz 12~\mathrm{GHz} . Internal quality factors decrease sharply with frequency, which we describe with a simple loss model. The possibility of a loss mechanism intrinsic to the superconductor-semiconductor junction is considered. I Introduction Superconducting circuits are currently a topic of interest, driven by the growth of superconducting quantum computing Blais et al. 2021 . High-impedance circuits, most notably the fluxonium qubit Manucharyan et al. 2009 , have appealing properties such as high coherence Nguyen et al. 2019 , high-fidelity gates Bao et al. 2022 ; Ding et al. 2023 , and routes to noise protection Gyenis et al. 2021 ; Ardati et al. 2024 ; Mencia et al. 2024 . The enabling circuit element for high-impedance qubits is a superinductor – a device whose characteristic impedance Z exceeds the resistance quantum R_{Q}~=~\hbar/4e^{2}~\approx~1.027 k \Omega Masluk et al. 2012 . Creating ideal superinductance remains challenging because of stringent and often conflicting requirements. Take superinductance realized by a chain of Josephson junctions as an example. In a tunnel junction, avoiding phase slips requires a small charging energy E_{C}\ll E_{J} where E_{C} is the junction charging energy and E_{J} is the Josephson energy. However small E_{C} comes at a cost, since it leads to small plasma frequency \omega_{p}\sim\sqrt{E_{C}E_{J}} , reducing operating frequencies. Thus, there are conflicting constraints on E_{C} that must be navigated. The challenge of creating ideal superinductance has recently motivated exploration of alternative approaches Maleeva et al. 2018 ; Kuzmin et al. 2019 ; Mukhopadhyay et al. 2023 ; Charpentier et al. 2025a ; Charpentier et al. 2025b . Superconductor-semiconductor hybrids are an interesting system for consideration. The ability to make gate-tunable, field-resilient, and high-transparency Josephson junctions in this system has already yielded a series of exciting developments in the demonstration of gate-tunable transmon qubits Larsen et al. 2015 ; Luthi et al. 2018 ; Casparis et al. 2018 , Andreev qubits Hays et al. 2018 ; Tosi et al. 2019 , and amplifiers Phan et al. 2023 ; Hao et al. 2024 . Recently the first fluxonium hybrid qubit was demonstrated using an Al/InAs array as the inductive element Strickland et al. 2025 , posing the new problem of hybrid superinductance. Hybrid superinductance is radically different from tunnel-junction superinductance. Due to planar geometry, hybrid junctions have a large charging energy; E_{C}>E_{J} is nearly unavoidable. While yielding the benefit of high plasma frequency, the presence of a large charging energy immediately raises the potential drawback of quantum phase slips. On the other hand, in hybrid junctions phase slips may be suppressed due to high transparency Bargerbos et al. 2020 ; Kringhøj et al. 2020 , which occurs without fine tuning in the diffusive limit Vanević and Nazarov 2012 . Does hybrid superinductance confer the ability to break the superinductance “barrier” E_{C}/E_{J}>1 , yielding high plasma frequency? Or, rather, is performance degraded by phase slips? The above conundrum motivated our study. We fabricate chains of Josephson junctions from an Al/InAs 2D electron gas and investigate their microwave response. In order to obtain a sufficiently large inductance without stray capacitance from electrostatic gates, we explore arrays in the long-junction limit Mayer et al. 2019 . Comparing devices with different junction sizes, we reach the superinductance regime Z>R_{Q} , and, unlike conventional Al/AlOx devices, find no resolvable limitations from the single-junction plasma frequencies. The observed dispersion is well described by finite-element microwave simulations. Quality factors decrease sharply with increasing mode frequency, which is the opposite of the behavior expected from phase slips. Rather, we find that loss is well described by an effective resistance shunting the junctions. Although the shunt’s microscopic origin is not certain, we suggest that it is related to our use of junctions in the diffusive limit, and discuss mitigation strategies that would make our superinductance approach practical for fluxonium qubits. At current quality levels, our devices are promising for readout of spin Reilly et al. 2007 ; Petersson et al. 2010 ; Crippa et al. 2019 ; Bartee et al. 2025 and parity qubits Aghaee et al. 2025a ; van Loo et al. 2025 ; Aghaee et al. 2025b at modest frequencies ( <1~\mathrm{GHz} ), potentially outperforming dominant coil inductors Hornibrook et al. 2014 by offering higher quality factor, reduced capacitance, and compact form factor. II Experiment and Results Figure 1: (a) Left: Optical image of a chain of 800 Josephson junctions is capacitively coupled to a coplanar waveguide (CPW) in the hanger geometry. Right: the close-up image taken with a scanning electron microscope, Al islands (blue) above the InAs 2D electron gas (orange) are separated by the junction length l_{J} , forming Josephson junction chains. The unit cell size is d=1.2~\mathrm{\mu m} for all devices. Scale bar on the bottom right is 1 \mu m. (b) Lumped element model of a Josephson junction chain. (c) Top layers of the material stack. InGaAs/InAs/InGaAs layers form 2D electron gas. The two capacitors at each end of the chain represents coupling capacitors. (d) S_{21} phase data (points) and the fit (solid line) of the mode 3 of the 700 nm Device 1 at the base temperature. The devices are on-chip resonators capacitively coupled to a coplanar waveguide in the hanger geometry (Fig. 1(a)). Each resonator consists of 800 planar Al/InAs Josephson junctions in series. The material stack shown in Fig. 1(c) is prepared by epitaxial growth. The mobility and the carrier density of the film was determined with Hall measurement to be (1.5\pm 0.2)\times 10^{4}~\mathrm{cm^{2}/Vs} and 9.76\times 10^{11}~\mathrm{cm^{-2}} . We use electron-beam lithography to pattern and selective etching to form Al islands, followed by similar steps to form 1~\mathrm{\mu m} -wide pillar-like structure of semiconducting layers, commonly referred to as “mesa.” The Al islands of the resulting devices are separated by junction length l_{J} and unit cell size d=1.2~\mathrm{\mu m} to form planar Josephson junctions. Three devices are fabricated and measured: two devices with l_{J}= 700 nm (Device 1,2) and a device with l_{J}= 400 nm (Device 3). The Josephson junction chain can be understood as an equivalent circuit shown in Fig. 1(b). Each Josephson junction has a shunt capacitance C_{J} , an equivalent inductance L_{J} given by the Josephson relation, and a parasitic capacitance C_{0} to ground. The experimental microwave setup is standard for circuit quantum electrodynamics experiments. Measurements are performed using a vector network analyzer and a dilution refrigerator with a base temperature of 23~\mathrm{mK} . The microwave input line is equipped with attenuators for thermalization. On the readout line, a double-junction 4-8 GHz isolator at base temperature is followed by a cryogenic high electron mobility transistor amplifier on the 4 Kelvin stage and a room temperature amplifier. In Device 1, measured microwave transmission shows a resonance near 4.1~\mathrm{GHz} (Fig. 1(d)), yielding resonator parameters Q_{~\mathrm{tot}}=257 , Q_{~\mathrm{ext}}=2830 , and

Read the complete text