Collapse versus Disruption: The Fate of Compact Stellar Systems in Ultralight Dark Matter Halos
Yu-Ming Yang, Xiao-Jun Bi, Long Wang, Peng-Fei Yin · 2026
Read Collapse versus Disruption: The Fate of Compact Stellar Systems in Ultralight Dark Matter Halos by Yu-Ming Yang, Xiao-Jun Bi, Long Wang, Peng-Fei Yin (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-09403.txt.
Introduction
Yu-Ming Yang, Xiao-Jun Bi, Long Wang, and Peng-Fei Yin ask what ultralight dark matter does to small star systems. Their 2026 arXiv paper studies compact stellar systems living inside halos of this wavy dark matter. Waves in the dark matter field make the halo's gravity flicker over time.
That flickering heats the stars, pumping energy into the system step by step. Small systems are often used to set tight limits on ultralight dark matter for this reason. Yet systems far smaller than the dark matter's wavelength are still poorly explored. The authors ask when heating puffs a system apart and when it instead collapses.
Catalog record
| CREATOR | Yu-Ming Yang, Xiao-Jun Bi, Long Wang, Peng-Fei Yin |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-09403
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Collapse versus Disruption: The Fate of Compact Stellar Systems in Ultralight Dark Matter Halos Yu-Ming Yang, Xiao-Jun Bi, Long Wang, Peng-Fei Yin Abstract Interference of the ultralight dark matter (ULDM) field generates time-varying gravitational potential fluctuations, which stochastically heat stellar systems embedded in ULDM halos. Small-sized stellar systems are therefore often used to set stringent constraints on ULDM. However, the evolution of systems with sizes well below the ULDM de Broglie wavelength remains poorly explored. Using numerical simulations, we show that the evolution of compact stellar systems in ULDM halos is governed by the interplay between internal stellar relaxation and ULDM-induced heating. We find the following main results. First, in sufficiently compact systems, relaxation-driven core collapse dominates, allowing the system to remain bound and dense, while ULDM-induced stripping of outer stars further accelerates the collapse. Second, in more extended systems, ULDM heating dominates and ultimately disrupts the system. Near the disruption threshold, we identify systems resembling ultra-faint dwarfs like Segue 1. Third, we further introduce a dimensionless parameter to quantify the relative importance of heating and relaxation and finally lead to an evolutionary phase diagram. Our results reveal the rich and nontrivial dynamics of compact stellar systems in ULDM halos, indicating that precise system modeling is essential for robust ULDM constraints. Introduction. —The interference of ultralight dark matter (ULDM) 20 ; 35 ; 21 ; 22 waves produces stochastic density granules in ULDM halos. These inhomogeneities have been proposed as a possible explanation for several gravitational lensing anomalies 3 ; 10 . Moreover, the associated fluctuations in the gravitational potential induce dynamical heating of stellar systems embedded in ULDM halos 4 ; 19 ; 13 ; 11 ; 15 ; 44 ; 54 ; 49 ; 51 ; 52 , leading to an expansion of their sizes. Consequently, systems with small spatial extents, such as nuclear star clusters 28 ; 38 ; 12 and ultra-faint dwarf galaxies (UFDs) 14 ; 30 , are often regarded as imposing strong lower bounds on the ULDM particle mass. However, a recent study 17 suggests that for systems much smaller than the ULDM de Broglie wavelength, such heating may remain ineffective over a long time. Unlike larger systems, the relaxation time of compact systems can be shorter than the age of the Universe 6 ; 31 . As a result, effects driven by two-body gravitational scattering, such as core collapse and envelope expansion, may play a prominent role in their dynamical evolution 6 . While these effects are well established in star cluster simulations 31 ; 48 , the evolutionary behavior of such systems embedded within ULDM halos remains poorly explored. Investigating this issue through reliable numerical simulations presents significant computational challenges, as it demands high temporal and spatial resolution. In this study, we present a simulation framework that integrates ULDM simulations 18 with direct N -body modeling of stellar systems 47 . We employ PeTar 47 , a widely used code for star cluster simulations, to simulate the internal evolution of stellar systems under stochastic heating induced by ULDM. Our results demonstrate that the interplay between stellar relaxation and ULDM heating governs the evolution of stellar systems. For sufficiently dense systems, we find that they can remain bound and compact throughout their evolution, even for an ULDM particle mass m_{a} as low as 10^{-22} eV. Moreover, the stripping of outer stars driven by ULDM heating could accelerate core collapse and yield systems even more concentrated than their initial states. In contrast, initially less compact systems are more vulnerable to disruption. In near-disruption cases, we identify remnants whose properties resemble the observed UFDs, such as Segue 1 5 ; 29 ; 41 ; 42 . Finally, we introduce a dimensionless parameter that quantifies the relative strength of ULDM heating versus stellar relaxation. Through extensive simulations, we construct a two-dimensional phase diagram that captures the distinct evolutionary fates of stellar systems in ULDM halos. Simulation setup. —Since the spatial extent of the stellar system ( \lesssim 30 pc) under study is much smaller than the ULDM de Broglie wavelength ( \sim kpc), resolving its evolution demands much finer temporal and spatial resolution than the ULDM simulation itself. To reduce computational cost, we adopt a two-stage approach: first, we model the entire stellar system as a mass point evolving within the ULDM halo, recording its trajectory and the associated ULDM-induced tidal tensor; subsequently, we use a N -body code to simulate the stellar system’s internal evolution under this time-dependent tidal tensor. In the first-stage simulation, we account for tidal stripping of the ULDM halo by the Milky Way (MW) and the Large Magellanic Cloud (LMC), adopting a realistic assembly history where the halo evolves outside the MW for \sim 3 Gyr before infalling onto an MW orbit similar to Segue 1’s inferred trajectory 34 . This setup enables a meaningful comparison with observations. To ensure a fair comparison among second-stage simulations with different initial internal stellar configurations, we only perform a single first-stage simulation for m_{a}=10^{-22}\mathrm{\,eV} , where the stellar system is modeled as a point mass of M_{\star}=10^{3}M_{\odot} with a softening length of 5 pc. All second-stage simulations adopt the same tidal tensor obtained from this first-stage run. This simplification does not qualitatively affect our conclusions. Further details of the first-stage simulation, including the construction of the initial condition, the implementation of MW and LMC tidal forces, and the system evolution, are provided in the Supplemental Material. The impact of ULDM on the internal evolution of the stellar system originates from the inhomogeneity of its gravitational potential V_{\mathrm{ULDM}} 1 . Since the characteristic variation scale of V_{\mathrm{ULDM}} is much larger than the size of the stellar system, the ULDM-induced acceleration of a star at position \bm{r} with respect to the system’s center of mass \bm{r}_{c} can be approximated by \Delta\bm{a}(\bm{r},\bm{r}_{c})\simeq-(\bm{r}-\bm{r}_{c})\cdot\nabla\nabla V_{\text{ULDM}}(\bm{r}_{c}), (1) where \nabla\nabla V_{\text{ULDM}} denotes the tidal tensor obtained from the first-stage simulation, and \bm{r}_{c} is the center-of-mass position of the stellar system within the ULDM halo. To illustrate the diversity of evolutionary outcomes, we examine six representative simulations. The initial stellar density distribution is assumed to follow a Plummer profile 36 \rho_{\star}(r)=(3M_{\star}/4\pi R_{\mathrm{h}}^{3})(1+r^{2}/R_{\mathrm{h}}^{2})^{-5/2} , with initial conditions generated in approximate dynamical equilibrium using McLuster 24 . The adopted total stellar mass M_{\star} , particle number N , and two-dimensional half-mass radius R_{\mathrm{h}} are listed in Tab. 1 . In the second-stage simulation, we evolve the stellar particles using the direct N -body code PeTar 47 . For each parameter set, we perform an ULDM-influenced run and an isolated run without ULDM. By the end of simulations ( 13 Gyr), the accumulated energy error in all six isolated runs remains below 0.015\% . In the simulations with ULDM, the tidal tensor is incorporated into PeTar by fixing the system’s center of mass at \bm{r}_{c}=\bm{0} and computing the additional acceleration induced by ULDM for each stellar particle according to Eq. ( 1 ). Fig. 1 shows the temporal evolution of both the circularly averaged projected stellar density and the velocity dispersion along the z -direction for the six stellar systems initialized with parameters from Tab. 1 . Solid and dashed lines represent systems evolving within an ULDM halo and in isolation, respectively, with distinct colors