A Hybrid Model-based and Data-based Approach Developed for a Prosthetic Hand Wrist

Shifa Sulaiman, Francesco Schetter, Mehul Menon, and Fanny Ficuciello · 2026

Read A Hybrid Model-based and Data-based Approach Developed for a Prosthetic Hand Wrist by Shifa Sulaiman, Francesco Schetter, Mehul Menon, and Fanny Ficuciello (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-08711.txt.

Introduction

Shifa Sulaiman, Francesco Schetter, Mehul Menon, and Fanny Ficuciello combine model-based and data-based control for a prosthetic hand wrist. Their 2026 arXiv paper notes that advanced control algorithms help prosthetic hands replicate intricate human hand motions. The target device is the tendon-driven soft continuum wrist of PRISMA HAND II.

The controller joins an artificial neural network approach with a sliding mode controller. Model-based design gives structure, while the network adapts to behavior the model misses. A wrist that moves naturally and holds position under load can make a prosthesis far more usable. Hybrid control offers a practical route when soft hardware is hard to model exactly.

Catalog record

CREATORShifa Sulaiman, Francesco Schetter, Mehul Menon, and Fanny Ficuciello
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE37 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-08711

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Hybrid Model-based and Data-based Approach Developed for a Prosthetic Hand Wrist Shifa Sulaiman, Francesco Schetter, Mehul Menon, and Fanny Ficuciello Abstract The incorporation of advanced control algorithms into prosthetic hands significantly enhances their ability to replicate the intricate motions of a human hand. This work introduces a model-based controller that combines an Artficial Neural Network (ANN) approach with a Sliding Mode Controller (SMC) designed for a tendon-driven soft continuum wrist integrated to a prosthetic hand known as ’PRISMA HAND II’. Our research focuses on developing a controller that provides a fast dynamic response with less computational effort during the motions of the wrist. The proposed controller consisted of an ANN for computing bending angles incorporated along with an SMC to regulate tendon forces. Kinematic and dynamic models of the wrist are formulated using Piece-wise Constant Curvature (PCC) hypothesis. The performance of the proposed controller is compared with other controller strategies developed for the same wrist. Simulation studies and experimental validations of motions of the fabricated wrist employing the controller are included in the paper. keywords Prosthetic hand, Soft robot, Hybrid controller, Data based approach, Model based controller 1 Introduction The application of control strategies to regulate motions of prosthetic hands is essential for improving functionality and usability of these advanced devices fanny1 , fanny2 . By integrating sophisticated control algorithms, prosthetic hands can more accurately mimic the natural movements of a human hand, allowing users to perform a wider range of tasks with greater precision. These advanced control strategies often utilize sEMG or force sensors to detect muscle activity or interaction forces, which are interpreted by reinforcement learning-based controllers to adaptively generate grasping motions or trajectory adjustments in real time de . Effective control strategies are particularly important to individuals who rely on prosthetic limbs for daily activities, as effective control strategies can significantly improve their quality of life control1 ; control2 . The development of adaptive and intuitive control systems enables users to engage in complex tasks, such as grasping objects of varying shapes and sizes, thereby enhancing the overall functionality of the prosthetic device palli , palli1 . The synergy between kinematic and dynamic models in controller design not only improves the precision of soft robots but also expands their functional capabilities review . The integration of these modeling strategies enables the development of controllers that can effectively manage the inherent uncertainties associated with soft materials. Hybrid controller strategies incorporating Artificial Neural Network (ANN) based algorithms are developed nowadays to improve the performance of the soft robotic motions with less computational efforts ANN . This study presents a control scheme that integrates an Artificial Neural Network (ANN) with a Sliding Mode Controller (SMC) to manipulate motions of a soft continuum wrist attached to a prosthetic hand. We combined the adaptive learning capability of ANN for modeling complex, nonlinear system dynamics with the robustness of sliding mode control (SMC) to handle external disturbances and model uncertainties. We adopted Piece-wise Constant Curvature (PCC) modelling strategy to determine kinematic and dynamic models of the soft continuum wrist. PCC offered a solution to the complexities associated with the infinite dimensionality due to the complex configurations of soft robots. The model obtained using PCC was used in the controller strategy to increase accuracy and performance of the controller outputs. The major contributions of the presented work are as follows: • Modelling of a soft continuum wrist based on a 4-element parameterized configuration using PCC method. • Development of a data and model-based approach combining ANN and SMC for improving the performance of wrist motions. • A comparison study of the proposed controller with a PID controller and other model-based controllers to demonstrate the advantages of the proposed controller. • An experimental validation proving the effectiveness of the proposed controller in presence of external disturbances during real-time implementations with reduced computational effort. The outline of this paper is given as follows: Section II presents related work on the development of controllers for soft continuum mechanisms. Design and modelling procedures are given in section III. SMC strategy is demonstrated in section IV. Section V presents the simulation and experimental results. Section VI presents the conclusion of this work, summarizing key findings and outlining potential directions for future research. 2 BACKGROUND The integration of tendons allows soft robots to achieve complex motions while maintaining structural integrity. Tendon-driven soft continuum robots offer several notable advantages that enhance functionality and versatility of the whole mechanism wockenfuss2022design , tutcu2021quasi . Various modeling techniques such as Constant Curvature (CC) models escande , Variable Curvature (VC) models huang , Finite Element Method (FEM) xavier , Machine Learning (ML) methods renda are employed to determine both static and dynamic models of soft robots. The major benefit of PCC modeling is its ability to accommodate the inherent flexibility and adaptability of soft robots ANN1 . Unlike traditional rigid-body models, which often struggle to accurately depict the dexterous motions of soft robots, the PCC model captures the continuous nature of soft robots while maintaining computational efficiency. PCC-based modeling has been widely adopted for soft continuum robots due to its ability to approximate complex, continuous deformations using discrete constant-curvature segments. This approach enables simplified kinematic formulations while maintaining sufficient accuracy for many practical applications. By reducing the complexity of continuous deformation into manageable geometric primitives, PCC facilitates real-time control and simulation, which is particularly valuable for robots operating in constrained or dynamic environments. Moreover, it allows for modular representation of multi-segment structures, making it easier to integrate with optimization and learning-based control frameworks. PCC models are also compatible with various actuation strategies including tendon-driven, pneumatic, and hybrid systems further enhancing their versatility across different soft robotic platforms. Despite its approximative nature, PCC has proven effective in capturing essential motion characteristics, especially when combined with empirical calibration or adaptive control techniques. PCC-based modelling of a rigid-soft continuum robot actuated using bellows was carried out in r1 . Experimental validation showcased a higher positional accuracy (higher than 98%) during the motions of the robot. A PCC method employed for deriving kinematic model of a soft robot manufactured using latex rubber was demonstrated in r2 . Experimental validations demonstrated that the model could not sustain load when the loading surpassed the stiffness of the trunk. PCC based 3D modelling of a tendon-driven soft continuum robot considering twisting effects was presented in rao . The static modelling methodology was employed for modelling a tendon-driven continuum robot that encounters stability issues due to dimensional constraints on the rods along their backbone. A continuum robot modelled using an approximate piecewise constant curvature (APCC) method was illustrated in cheng . The APCC model simplified the original kinematic model by employing classical rigid linkages, thereby enhancing numerical stability. Another soft continuum robot modelled using PCC method incorporating a 4 parameter configuration criteria was discussed in della . A dynamic model based controller was implemented employing the PCC method. Incorporating kinematic and dynamic models into a controller scheme facilitates a structured and efficient way to handle curvature-related computations ANN2 . SMC strategies are presently employed in a wide variety of applications to control the movements of various soft robots owing to its superior performance capabilities ANN3 . An adaptive SMC developed for a

Read the complete text