Bridging Theory and Experiment in Virtually Imaged Phased Array (VIPA) Spectrometers

Kiumars Aryana, D. Michelle Bailey, Solomon I. Woods, Adam J. Fleisher · 2026

Read Bridging Theory and Experiment in Virtually Imaged Phased Array (VIPA) Spectrometers by Kiumars Aryana, D. Michelle Bailey, Solomon I. Woods, Adam J. Fleisher (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-08589.txt.

Introduction

Kiumars Aryana, D. Bailey, Solomon Woods, and Adam Fleisher wrote a 2026 arXiv paper on a small tool that splits light into fine bands. The tool is a Virtually Imaged Phased Array, or VIPA, spectrometer. VIPA tools give fine detail and fast reads in a small box. As light-splitting tools, their work is frail to small flaws in how they are made. Part sizes and alignment can shift the result. The team uses computer runs checked by real data, to find which factors cap the detail the tool can reach.

Catalog record

CREATORKiumars Aryana, D. Michelle Bailey, Solomon I. Woods, Adam J. Fleisher
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-08589

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Bridging Theory and Experiment in Virtually Imaged Phased Array (VIPA) Spectrometers Kiumars Aryana, D. Michelle Bailey, Solomon I. Woods, Adam J. Fleisher Abstract Virtually imaged phased array (VIPA) spectrometers provide high resolution and fast acquisition in a compact design, but their performance as dispersive instruments is sensitive to fabrication tolerances, component dimensions, and alignment. Here, leveraging numerical simulations validated by experimental data, we present a framework to identify the parameters that limit VIPA spectrometer resolution. This framework is applied to the construction of a new mid-infrared VIPA spectrometer, tested at wavelengths near λ \lambda = 4.6 μ \mu m with both continuous-wave and frequency-comb laser sources, with a resolving power predicted by analytical expressions to be as high as R ​ P RP = 830 000 (corresponding to a resolution of δ ​ ν \delta\nu = 78 MHz). Validated numerical simulations, however, provided a more realistic estimate that captures limits set by all the optical components. By correcting aberrations and optimizing alignment, a resolving power of R ​ P RP = 440 000 ( δ ​ ν \delta\nu = 150 MHz) was experimentally achieved, corresponding to 80% of the value predicted by numerical simulation of the entire spectrometer. These results bridge the gap between analytical design expressions and experimental results for compact, high-resolution VIPA spectrometers to enable more efficient fabrication and advanced design across critical areas like applied space optics, line-by-line pulse shaping, and broadband spectral sensors. 1 Introduction The unambiguous detection of multiple molecular species has vast applications in scientific research and industry, including for medical diagnostics [ 1 , 25 , 13 ] and imaging [ 7 ] , chemical kinetics [ 11 , 4 , 14 ] , plasma diagnostics [ 21 , 19 , 22 , 20 ] , and astronomical discoveries [ 29 , 10 ] . Different spectroscopic techniques offer trade-offs in terms of their spectral range, resolution, measurement speed, and size. Fourier Transform Infrared (FTIR) spectroscopy is one of the most widely used techniques, noted for its broad spectral coverage and commercial availability [ 12 , 9 ] . However, FTIR relies on moving components and its resolution is dependent upon the interferometer path length (with the exception being sub-nominal techniques [ 16 ] ), a dimension which increases at longer wavelengths. An alternative approach that offers high resolving power ( RP > 10^{5} ), albeit over a narrower spectral range, but eliminates the need for moving parts is the virtually imaged phased array (VIPA) spectrometer [ 8 ] . These instruments spatially disperse broadband light into its constituent wavelengths on a two-dimensional detector plane using orthogonal dispersive elements: a tilted Fabry–Pérot interferometric device (i.e., a VIPA) and a diffraction grating. At the heart of the spectrometer, the VIPA serves as the primary high-dispersion element, enabling a simple and compact spectrometer design. The VIPA, developed for wavelength demultiplexing [ 23 , 28 , 26 ] , was first used in a cross-dispersed spectrometer for molecular fingerprinting in the visible at a wavelength of \lambda = 633 nm [ 8 ] . That pioneering experiment achieved a resolving power of RP = 400 000 (based on a full-width at half-maximum (FWHM) definition [ 18 ] and the observed instrument line shape), which is about a factor of three shy of the VIPA-limited resolution predicted using an idealized model and assuming several key parameters for the etalon (see table 1). A subsequent demonstration of a VIPA spectrometer in the near-infrared achieved RP = 230 000 for molecular composition and breath analysis [ 25 ] , with a design having potential RP = 580 000 based on the detailed consideration of numerous optical components [ 24 ] . The first mid-infrared VIPA spectrometer reported RP = 130 000 [ 17 ] , lower than the VIPA-limited prediction of RP = 390 000. More recently, a far-infrared VIPA was fabricated with measured RP = 16 300 at \lambda = 116 \mu m and cryogenic (T = 4 K) temperature [ 30 ] , with a corresponding VIPA-limited RP = 22 000. The key parameters from these initial VIPA spectrometers are summarized in Table 1 to illustrate the challenges in achieving resolution limits when implementing proof-of-principle devices and instruments in new measurement regimes. Numerical simulations offer a powerful tool to bridge the gap between analytical expressions for VIPA-limited resolving power and experimental observations of newly realized spectrometers. Furthermore, computational models allow for the controlled variation of parameters and components that are difficult or time-consuming to adjust experimentally. Therefore, verified numerical simulations can enable high-performing VIPA spectrometers when utilized early in the design and testing phase. In this context, comprehensive system-level modeling is crucial—not only for design optimization but also for evaluating sensitivity, reducing prototyping, and predicting performance under different operating conditions. Table 1: Informative summary of parameters found in the literature for the first reported virtually imaged phased array (VIPA) spectrometers in the visible, near-infrared, mid-infrared, and far-infrared spectral regions. These include wavelength ( \lambda ), highly reflective (HR) coating power reflection coefficient ( R_{1} ), partially reflective (PR) coating power reflection coefficient ( R_{2} ), VIPA thickness ( t ), incident beam angle ( \theta_{i} ), and spacer material refractive index ( n_{r} ). Also listed are the experimental (Exp.) and theoretical (Theo., based on analytical expressions [ 27 ] ) resolving powers ( RP ) and their ratio. Study \lambda R_{1} R_{2} t \theta_{i} n_{r} Exp. RP Theo. RP Exp./Theo. ( \mu m) (%) (%) (mm) (°) (%) Diddams et al. [ 8 ] 0.633 100 * 96 2 * 2 * 1.5 * 400 000 1 400 000 29 Thorpe et al. [ 25 , 24 ] 1.6 100 96 1.5 2 2 230 000 580 000 40 Nugent-Glandorf et al. [ 17 ] 3.8 99.8 98 0.8 15 3.43 130 000 390 000 33 Zou et al. [ 30 ] † 115.7 99 92 9.9 13 3.39 16 300 22 000 74 * Values for these parameters were not reported by Diddams et al. [ 8 ] . The values listed here are estimated to achieve a VIPA free spectral range of \nu_{\text{fsr}} = 50 GHz, assuming a solid glass spacer and a small incident beam angle. • †Information from Zou et al. [ 30 ] is taken from their Table 1 and Figure 2 for a VIPA operating at a temperature of 4 K, where VIPA spacer material absorption losses are negligible. In this work, we performed a systematic analysis to assess the impact of each optical component within a new mid-infrared VIPA spectrometer assembly, aiming to identify the critical factors contributing to instrument line shape broadening and distortion. Using analytical expressions, we calculated a theoretical resolving power for our VIPA spectrometer at \lambda = 4.6 \mu m of RP = 830 000. Through numerical simulation, we identified spherical aberration, imaging lens alignment, and aperture effects as the primary sources of resolution loss during initial spectrometer alignment. By addressing these initial deficiencies, we demonstrated that the spectrometer resolving power can be as high as RP = 440 000, thereby gaining a better understanding of the discrepancy between analytical expression predictions and experimental results at the component level. The paper is organized as follows.

Read the complete text