Modal Parameter Extraction via Propeller-Driven Vibration Testing
Gabriele Dessena 1, and Alessandro Pontillo 2 · 2026
Read Modal Parameter Extraction via Propeller-Driven Vibration Testing by Gabriele Dessena 1, and Alessandro Pontillo 2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-08123.txt.
Introduction
Gabriele Dessena and Alessandro Pontillo test propeller-driven vibration testing as a cheaper route to aircraft modal data. Their 2026 arXiv paper notes that ground vibration testing supports certification but takes long, costly campaigns. Propeller-driven testing is an output-only option in the spirit of operational modal analysis. Taxi and flight vibration testing follow the same broad idea of using working loads. The authors assess whether a spinning propeller can excite an aircraft well enough for modal parameter extraction. If it works, smaller teams could gather certification-grade data faster.
Catalog record
| CREATOR | Gabriele Dessena 1, and Alessandro Pontillo 2 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-08123
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Modal Parameter Extraction via Propeller-Driven Vibration Testing Gabriele Dessena 1, and Alessandro Pontillo 2 Abstract Ground Vibration Testing (GVT) supports aircraft certification but often requires lengthy and costly campaigns. Propeller-driven Vibration Testing (PVT) is assessed here as an output-only alternative, in line with Operational Modal Analysis approaches such as Taxi Vibration Testing and Flight Vibration Testing. A cantilever Aluminium 7075-T6 wing spar is instrumented with seven accelerometers and excited by an outboard electric motor and propeller. Seven runs are carried out: a motor-off baseline, five constant-throttle cases, and a manual up–down throttle sweep. The acquired spectra indicate that the dominant resonances remain observable under propeller excitation, while low-throttle conditions introduce narrowband harmonics that may mask structural peaks; the sweep reduces persistent overlap. Modal parameters are identified for the baseline and sweep cases using the Natural Excitation Technique with the Loewner Framework (NExT-LF). The first two modes remain closely matched (Modal Assurance Criterion (MAC) > 0.99 >0.99 ), whereas the third mode shows reduced repeatability (MAC = 0.827 =0.827 ) and a larger frequency shift, consistent with propeller-induced bending–torsion coupling and non-ideal sweep control. Overall, PVT provides a viable complement to GVT for extracting low-frequency modal information and motivates pursuing future work on automated throttle scheduling and coupling-aware test planning. \confshortname SSDM2026 \conffullname the ASME 2026 Aerospace Structures, Structural Dynamics, and Materials Conference \confdate June 8-10 \confyear 2026 \confcity Long Beach \confcountry California {nomenclature} \entry 3SThree-cell lithium polymer battery pack (three cells in series). \entry ANPSDAverage Normalised Power Spectral Density. \entry AutoMACAuto Modal Assurance Criterion. \entry EYoung’s Modulus [Pa] \entry EMAExperimental Modal Analysis. \entry ESCElectronic speed controller. \entry FEMFinite element model. \entry f_{s} Sampling frequency [Hz]. \entry FVTFlight Vibration Testing. \entry GVTGround Vibration Testing. \entry GShear modulus [Pa]. \entry HARHigh-aspect-ratio. \entry k System order. \entry k_{\min} Minimum system order used in stabilisation diagram construction. \entry k_{\max} Maximum system order used in stabilisation diagram construction. \entry \mathbf{k} Set of system orders used in stabilisation diagram construction. \entry LFLoewner Framework. \entry LiPoLithium polymer (battery). \entry MACModal Assurance Criterion. \entry \mathrm{MAC}_{\mathrm{stab}} MAC stabilisation threshold for pole selection. \entry NExT-LFNatural Excitation Technique with the Loewner Framework. \entry OMAOperational Modal Analysis. \entry PSDPower Spectral Density. \entry PVTPropeller-driven Vibration Testing. \entry RPMRevolutions per minute. \entry SHMStructural Health Monitoring. \entry T_{d} Acquisition duration [s]. \entry TVTTaxi Vibration Testing. \entry \Delta k System-order increment used in stabilisation diagram construction. \entry \Delta\omega_{\mathrm{stab}} Frequency stabilisation tolerance for pole selection. \entry \Delta\zeta_{\mathrm{stab}} Damping stabilisation tolerance for pole selection. \entry \zeta_{n} Damping ratio of the n th mode. \entry \zeta_{\min} Minimum admissible damping ratio for pole screening. \entry \zeta_{\max} Maximum admissible damping ratio for pole screening. \entry \nu Poisson’s ratio. \entry \rho Material density [kgm -3 ]. \entry \boldsymbol{\phi}_{n} Mode shape of the n th mode. \entry \omega_{n} Natural frequency of the n th mode [Hz]. \entry \omega_{\min} Lower bound of admissible natural-frequency range for pole screening [Hz]. \entry \omega_{\max} Upper bound of admissible natural-frequency range for pole screening [Hz]. INTRODUCTION Ground vibration testing (GVT) constitutes a fundamental step within the aircraft certification framework [ 1 ] . Consequently, GVT campaigns are typically extensive and technically demanding, often spanning several weeks and requiring complex experimental configurations [ 2 ] . This inevitably results in substantial costs and significant time investment. Moreover, the adoption of advanced materials and innovative aircraft architectures has shown that the underlying assumptions of linearity are not always strictly valid [ 3 ] . Such nonlinear behaviour may originate from interactions between structural subcomponents, as shown for the Morane-Saulnier MS.760 Paris jet trainer in [ 4 ] , and geometrical effects, as demonstrated in [ 5 ] for a high-aspect-ratio (HAR) wing. Nonetheless, in the majority of practical situations, these effects can be neglected, since civil aircraft generally operate within a predominantly linear regime. Under these conditions, the primary outcomes of GVT remain the identification of modal parameters, namely natural frequencies ( \omega_{n} ), damping ratios ( \zeta_{n} ), and mode shapes ( \mathbf{\phi}_{n} ). Furthermore, vibration-based approaches relying on modal parameters have also been applied in Aeronautics and Aerospace for Structural Health Monitoring (SHM) for the detection and localisation of damage, most notably on the Space Shuttle vertical rudder [ 6 ] , and more recently in benchmark investigations on a flexible wing with simulated damage [ 7 ] , as well as in vibration-based SHM assessments conducted on a damaged BAE Systems Hawk T1A full airframe [ 8 ] . A detailed explanation of how vibration data, and in particular modal parameters, can be employed for this purpose is beyond the scope of this work; the interested reader is referred to the recent review in [ 9 ] . In general terms, structural damage may be interpreted as a deviation of the modal parameters with respect to the undamaged configuration. For these reasons, several methodologies have been proposed to improve the efficiency of the GVT process. Among these, Taxi Vibration Testing (TVT) [ 10 ] has attracted increasing attention over the past two decades. The core idea behind TVT is to exploit aircraft taxiing on a runway or taxiway, which is inherently uneven, as a natural source of excitation for dynamic testing. Within this framework, two main approaches can be identified: (i) towing-based excitation, as demonstrated in [ 11 ] , and (ii) active taxiing, where the excitation is provided by the aircraft propulsion system itself, with a demonstrator-scale application reported in [ 12 ] . In parallel, output-only techniques have also enabled the extension of vibration testing to in-flight conditions through Flight Vibration Testing (FVT) [ 13 ] , where modal parameters are identified directly from in-flight responses. Beyond fixed-wing aircraft, such approaches have found relevant aerospace applications in the identification of launch vehicles, where operational modal analysis has been successfully applied to flight data to track modal parameters under time-varying conditions associated with propellant consumption [ 14 ] . From a methodological standpoint, these approaches differ from classical Experimental Modal Analysis (EMA), on which traditional GVT is based, where the excitation is known, measured, and intentionally applied to the structure [ 15 ] . In contrast, both TVT and FVT are typically formulated within the framework of Operational Modal Analysis (OMA), which relies exclusively on response measurements and assumes the excitation to be unknown and broadband in nature. Building upon the use of OMA in Aeronautics, this work considers Propeller-driven Vibration Testing (PVT), as recently introduced in [ 16 ] . The underlying premise is that, in the context of the growing adoption of electric and hybrid-electric regional aircraft, PVT may provide an additional means for the dynamic validation of aircraft structures. In this sense, PVT has the potential to reduce reliance on conventional Ground Vibration Testing (GVT), alleviating associated time and cost constraints, while in the longer term complementing TVT and FVT. From a technical standpoint, PVT can exploit the broadband forcing generated by the propeller action and, potentially, its rotational effects to excite the wing. The primary objective of this study is to demonstrate the feasibility of extracting modal parameters from PVT data and to compare the identified results with those obtained from a classical impact hammer test. To this end, the concept of PVT is first recalled and subsequently applied to a flexible