Interfacial standing wave-patterns disentangle dilatational and shear surface viscous effects
Debashis Panda, Abdullah M. Abdal, Mosayeb Shams, Lyes Kahouadji, Jalel Chergui, Seungwon Shin, Damir Juric, Omar K. Matar · 2026
Read Interfacial standing wave-patterns disentangle dilatational and shear surface viscous effects by Debashis Panda, Abdullah M. Abdal, Mosayeb Shams, Lyes Kahouadji, Jalel Chergui, Seungwon Shin, Damir Juric, Omar K. Matar (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-06881.txt.
Introduction
Debashis Panda and seven co-authors wrote a 2026 arXiv paper on waves where two fluids meet. The paper deals with two kinds of drag at that surface. One kind acts when the surface grows or shrinks. The other acts when one part of the surface slides past the next.
The two kinds of drag tend to move in step, so their effects are hard to pull apart. Past work used flat flow or flows in one plane, where the split stays blurred. The team turns to waves that stand in place in three dimensions. In that setup, each kind of drag leaves its own mark. The marks let the team split the two effects and weigh each one on its own.
Catalog record
| CREATOR | Debashis Panda, Abdullah M. Abdal, Mosayeb Shams, Lyes Kahouadji, Jalel Chergui, Seungwon Shin, Damir Juric, Omar K. Matar |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-06881
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Interfacial standing wave-patterns disentangle dilatational and shear surface viscous effects Debashis Panda, Abdullah M. Abdal, Mosayeb Shams, Lyes Kahouadji, Jalel Chergui, Seungwon Shin, Damir Juric, Omar K. Matar Abstract Dilatational and shear surface viscosities are highly correlated parameters, making their individual contributions difficult to disentangle in Stokes flow, linearised flow models, or two-dimensional flows. We therefore investigate the three-dimensional interfacial standing waves as a means to decouple the influence of dilatational and shear surface viscosities. Two dimensionless controlling parameters are introduced: B q Bq , the total Boussinesq number, which quantifies the the relative importance of surface viscous stresses compared with bulk viscous stresses, and tan χ \tan\chi , which quantifies the ratio of surface dilatational viscosity to surface shear viscosity. The growth rates and threshold accelerations are independent of χ \chi , consistent with previous theoretical predictions. Nonlinear analyses of square and hexagonal patterns reveal that Fourier decomposition of wave-patterns can effectively decouple the intricate dynamics into axial modes, where the waves are weakly dependent on χ \chi , and oblique modes, where additional damping occurs in the shear surface viscous dominant interface. These results demonstrate that Faraday wave-patterns provide a route for identifying and quantifying the distinct roles of dilatational and shear surface viscosities. Introduction Surface-active agents, such as proteins, lipids, polymers, or surfactants, adsorb at fluid–fluid interfaces and alter their mechanical response by introducing in-plane friction [ 1 , 2 , 3 ] . The resulting molecular rearrangements give rise to surface rheology [ 4 ] , which couples interfacial mechanics with bulk flow dynamics. Such complex interfaces underpin diverse phenomena, from aerosol generation during bubble collapse [ 5 , 6 ] , which can influence climate, to the deformation of biological membranes that governs solute transport [ 7 ] . Despite the broad relevance of surface rheology, systematic studies on its effects remain limited. Most of the literature is restricted either to linear flow regimes [ 8 , 9 ] or to two-dimensional flows [ 10 , 11 , 12 ] , which neglects the key three-dimensional complexities of surface rheological dynamics in real-world applications. Here, we present a novel investigation of three-dimensional dynamics of two-dimensional standing wave-patterns to isolate and quantify surface-rheological effects at complex interfaces. Standing waves that arise at a fluid interface subjected to vertical vibration, commonly referred to as Faraday waves, constitute one of the simplest and most accessible systems for investigating out-of-equilibrium dynamics. In laterally unbounded configurations, these interfacial waves exhibit directional isotropy and interact through spatial superposition, generating a rich variety of ordered patterns. Depending on the underlying symmetries, the system may be organised into simple periodic structures, such as squares and hexagons [ 13 ] or more intricate arrangements, including double hexagons [ 14 ] and superlattices [ 15 ] . In the presence of surface-active agents, surface waves not only experience enhaced damping [ 16 ] , but can also significantly modify the resulting wave patterns [ 17 , 18 ] . The surface rheology of a Newtonian interface is commonly described by the Boussinesq–Scriven constitutive relation [ 19 ] , which expresses the interfacial viscous traction in terms of the dilatational and shear surface viscosities. Understanding when dilatational versus shear surface-viscous stresses dominate is crucial for elucidating complex interfacial rheology. For instance, predominantly dilatational surface-viscous stresses can lead to a highly compressed cavity collapse in bursting bubbles, promoting secondary bubble entrainment [ 5 ] , whereas the dominance of shear surface viscosity over dilatational surface viscosity can stabilise nonlinear flows [ 10 , 20 ] . Similarly, a perturbed drop has been found to elongate and destabilise into daughter droplets when the dilatational surface viscosity is sufficiently large. Consistent with this variability, experimental measurements report that the ratio of dilatational to shear surface viscosities can span up to five orders of magnitude [ 7 , 21 , 22 ] . This implies that reliable quantification of both surface viscosities is essential for characterising complex interfacial rheology. Numerous experimental strategies have been developed to measure surface viscosities, but they face significant limitations, primarily due to coupling between surface viscosity and surface tension gradients [ 2 , 3 , 1 ] . Theoretical studies have provided partial insights, yet are often hindered by inherent simplifying assumptions, particularly those associated with linearised flow models, Stokes flow, or two-dimensional flows. The origin of these theoretical limitations can be seen by examining the surface-excess traction that appears in the interfacial force balance. In the Boussinesq–Scriven framework, the surface-excess traction ( \mathbf{n}\cdot\mathbf{P} , where \mathbf{n} and \mathbf{P} are the normal and surface-excess tensor to the interface) due to varying surface tension ( \sigma ) and rheology ( \mu_{d} and \mu_{s} for dilatational and shear surface viscosities, respectively) for a three-dimensional interface is given by, \big[\mathbf{n}\cdot\mathbf{P}\big]_{\mathrm{3D}}=\big[\mathbf{n}\cdot\mathbf{P}\big]_{\mathrm{2D}}+\mu_{s}\,f(\mathbf{n},\mathbf{u}), where \mathbf{u} is the interfacial velocity, \nabla_{s}=(\mathbf{I}-\mathbf{nn})\nabla is the surface gradient operator, \mathbf{I} is the identity tensor, and f(\mathbf{n},\mathbf{u})=-(\mathbf{n}\times\nabla_{s}\mathbf{n}\times\mathbf{n}):\nabla_{s}\mathbf{n}\,\mathbf{u}+\mathbf{n}\times\nabla_{s}\big(\mathbf{n}\cdot\nabla_{s}\times\mathbf{u}\big)+2(\mathbf{n}\times\nabla_{s}\mathbf{n}\times\mathbf{n})\cdot\nabla_{s}(\mathbf{u}\cdot\mathbf{n})-2\,\mathbf{n}\,(\mathbf{n}\times\nabla_{s}\mathbf{n}\times\mathbf{n}):\nabla_{s}\mathbf{u} is a highly nonlinear term that depends on the interfacial curvature, normal, and velocity. The nonlinear function f(\mathbf{n},\mathbf{u}) is significant if and only if \mu_{s}\neq 0 . In contrast, in linearised and two-dimensional settings, f(\mathbf{n},\mathbf{u})\simeq 0 , and thus the expression simplifies such that the surface viscosities enter only through a combination of dilatational and shear surface viscosities, [\mathbf{n}\cdot\mathbf{P}]{{}_{2\rm D}}=\mathbf{n}\big(\sigma+(\mu_{d}+\mu_{s})(\nabla_{s}\cdot\mathbf{u})\big)\kappa+\nabla_{s}\sigma+(\mu_{d}+\mu_{s})\nabla_{s}(\nabla_{s}\cdot\mathbf{u}) [ 23 ] . Although dilatational surface viscosity influences surface compressibility and shear surface viscosity affects the surface velocity gradients at the interface, their contributions in such flows are highly correlated and therefore difficult to disentangle. Moreover, it is challenging to determine the dominance of surface viscosity effects when they appear as a correlated parameter. Motivated by this, in this study, we investigate the significance of the three-dimensional surface rheological effects in the dominant regimes of dilatational and shear surface viscosities in the context of standing wave-patterns. In this study, we show that the distinction between the two surface viscosities can be tracked via patterns formed on an interface under vertical vibration. The shear surface viscosity provides additional damping by suppressing the surface velocity gradients that occur due to the flow from the trough to the crest. The damping due to the shear surface viscosity is magnified in the case of a six-fold symmetric domain, and a pattern transition from a six-fold symmetric hexagon to a two-fold symmetric broken hexagon is observed as we increase (decrease) the shear (dilatational) surface viscosity. The proof-of-concept presented in this study can be utilised as a novel strategy to decouple the shear and dilatational surface viscous effects on a complex interface. Results and discussion We consider a three-dimensional cuboidal computational domain that is laterally periodic and bounded by closed top and bottom boundaries, with a fixed height H=5~\rm mm . As shown in figure 1 (a), three different lateral side configurations are chosen to satisfy two-fold, or quasi-2D ( \lambda_{c}\times\lambda_{c}/4 ), four-fold square ( \lambda_{c}\times\lambda_{c} ), and six-fold hexagon ( 2\lambda_{c}\times 2\lambda_{c}/\sqrt{3} ) symmetries, where \lambda_{c} is the critical wavelength of the surface waves when the interface is clean. In all configurations, the domain is filled to a depth h=1~\rm{mm} in all configurations with a water–glycerin mixture, initially flat and at rest, with air above. In the inertial frame of reference, vibration appears as a parametric modulation of the volumetric forces