Multiple Emulsions (W/O/W) for Confined Precipitation of Drug Nanoparticles

Umesh Dhumal · 2026

Read Multiple Emulsions (W/O/W) for Confined Precipitation of Drug Nanoparticles by Umesh Dhumal (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-06693.txt.

Introduction

Umesh Dhumal uses nested drops to make tiny drug grains in a 2026 paper. Drops of water in oil in water can box in where drug grains form. In that box, grains can start and grow in a tight space.

But such nested drops are frail and short-lived in most past work. How they are mixed and what goes in them shifts their life a lot. He builds them with sound waves in a two-stage plan of his own. The drops then last long enough to serve as molds for the grains. The grains that form are rich in drug and less than a micron wide. Drug firms gain a way to make grains of like size and load. The frail point of such drops is met head-on and fixed.

Catalog record

CREATORUmesh Dhumal
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE44 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-06693

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multiple Emulsions (W/O/W) for Confined Precipitation of Drug Nanoparticles Umesh Dhumal Abstract Multiple emulsions offer a compelling route to confine nucleation and growth during drug precipitation, yet their practical use is frequently limited by kinetic fragility and sensitivity to formulation and processing conditions. Here, we develop an ultrasound-assisted, two-stage emulsification strategy to generate water-in-oil-in-water (W/O/W) multiple emulsions with sufficient stability to function as templates for forming drug-rich submicron particulates. We first establish an operating window using simple W/O emulsions, showing that increased Tween 80 concentration and intensified sonication (higher amplitude and larger probe) yield smaller droplets and reduced coarsening tendencies. Using this window, W/O/W emulsions are formulated and systematically screened via surfactant pairing across ionic, non-ionic, and polymeric stabilizers. Ionic–non-ionic combinations provide the most favorable droplet-size control, with CTAB–Tween 80 emerging as a practically robust formulation. Cyclohexane was selected as a reproducible platform oil for downstream precipitation using the lead CTAB–Tween 80 formulation. Finally, curcumin-loaded W/O/W constructs generate curcumin-rich submicron particulates, supporting multiple emulsions as experimentally accessible microstructured environments for particle engineering of poorly soluble drugs. I. Introduction Poor aqueous solubility remains a common barrier to oral delivery for many pharmaceutically active compounds, because slow dissolution in gastrointestinal fluids can limit the rate and extent of absorption and contribute to variable exposure. Kalepu and Nekkanti 2015 ; Lipinski et al. 2001 ; Savjani, Gajjar, and Savjani 2012 From a transport perspective, dissolution kinetics depend on both the concentration driving force relative to saturation and the interfacial area available for mass transfer between the solid and surrounding fluid. Noyes and Whitney 1897 Accordingly, enabling strategies for poorly soluble drugs pursue increased apparent solubility (e.g., salt/prodrug design and solubilizing excipients) and/or increased surface area via particle-size reduction. Müller 2009 ; Liversidge and Liversidge 2008 Particle-size reduction is particularly impactful for Biopharmaceutics Classification System (BCS) class II compounds (low solubility, high permeability), where dissolution is frequently the controlling barrier to systemic exposure. Amidon et al. 1995 ; Liversidge and Liversidge 2008 Curcumin is a representative poorly water-soluble drug (from Curcuma longa ) that has attracted sustained interest due to reported antioxidant, anti-inflammatory, antimicrobial, and antitumor activities; however, its oral translation is strongly constrained by low and variable bioavailability, motivating extensive development of solubility- and dissolution-enhancement strategies including particle engineering and nano/micro-formulations. Thorat and Dalvi 2014 ; Anand et al. 2007 ; Hewlings and Kalman 2017 ; Mahran et al. 2017 Chemical approaches to address low aqueous solubility most commonly include salt formation and prodrug design. Salt formation can markedly improve dissolution rate and apparent solubility for ionizable APIs and remains a mainstay of solid-form development; however, it is inherently limited to compounds with suitable acid–base functionality and can introduce developability risks such as salt disproportionation, hygroscopicity, and pH-dependent precipitation or solid-form instability during scale-up and storage. Serajuddin 2007 ; Gupta et al. 2018 ; Berge, Bighley, and Monkhouse 1977 Prodrug strategies can similarly improve biopharmaceutical performance by transiently masking problematic functionalities or tuning lipophilicity/permeability, but they require predictable bioconversion and can alter disposition; variability in activation, exposure, or metabolite profiles can add uncertainty to efficacy and safety assessment. Müller 2009 ; Rautio et al. 2008 ; Huttunen, Raunio, and Rautio 2011 ; Rautio et al. 2018 Consequently, formulation-based particle engineering remains broadly applicable because it preserves molecular identity while improving dissolution performance; in this context, nanosuspensions and drug nanocrystals provide increased surface area (and often faster dissolution) without chemical modification, provided that stabilization against aggregation and growth is achieved. Rabinow 2004 ; Liversidge and Liversidge 2008 ; Merisko-Liversidge, Liversidge, and Cooper 2003 ; Junghanns and Müller 2008 ; Möschwitzer 2013 Top-down and bottom-up strategies are both used to access the sub-micron regime, but they impose different control challenges and failure modes. Rabinow 2004 ; Kipp 2004 ; Junghanns and Müller 2008 ; Möschwitzer 2013 Top-down methods (e.g., wet media milling and high-pressure homogenization) are attractive from a scalability and solvent-minimization standpoint and have become industrially mature routes for producing drug nanocrystals when appropriate stabilizers are present. Keck and Müller 2006 ; Peltonen and Hirvonen 2010 ; Junghanns and Müller 2008 ; Möschwitzer 2013 However, the intense mechanical stresses and local temperature rise during comminution can induce surface disorder, partial amorphization, or polymorphic conversion, with consequences for redispersibility and physical stability. Peltonen and Hirvonen 2010 ; Chikhalia et al. 2006 In contrast, bottom-up approaches (e.g., liquid antisolvent precipitation and related solvent-shift methods) create nanoparticles by generating high supersaturation and rapid nucleation; particle size and polydispersity are therefore governed by the competition between nucleation, growth, and aggregation on short time scales. Thorat and Dalvi 2012 ; Matteucci et al. 2006 ; Verma, Gokhale, and Burgess 2009 ; Chen et al. 2011 In practice, these methods demand tight control of micromixing and supersaturation trajectories to avoid uncontrolled growth and agglomeration, and they may introduce solid-form and residual-solvent concerns if crystallization proceeds through metastable intermediates or solvent-mediated pathways. Thorat and Dalvi 2012 ; Matteucci et al. 2006 ; Verma, Gokhale, and Burgess 2009 Across both routes, stabilizers (surfactants and/or polymers) are typically essential to provide steric/electrostatic barriers against aggregation and to mitigate growth phenomena such as Ostwald ripening; moreover, stabilizer identity and concentration can influence coarsening through solubilization effects and interfacial-layer properties. Verma et al. 2011 ; Rabinow 2004 ; Junghanns and Müller 2008 Several conventional routes are used to produce drug micro-/submicron particulates, including thermal recrystallization, spray drying, and solvent–antisolvent precipitation. In practice, these methods can struggle to consistently deliver small size together with narrow particle-size distributions and reproducible morphology at practical throughput. A key reason is that particle formation is highly sensitive to local supersaturation histories and mixing. For drying-based routes, coupled evaporation and heat transfer further influence nucleation, growth, and final particle structure. Kawabata et al. 2011 ; Thorat and Dalvi 2012 In spray drying, for example, the final attributes depend on atomization and drying kinetics and may be limited by thermal exposure and collection inefficiencies as particle size decreases. Vehring 2008 ; Sosnik and Seremeta 2015 More broadly, supercritical-fluid-based micronization routes can offer rapid solvent removal and tunable thermodynamics, but frequently rely on elevated pressures and specialized pressurization/expansion hardware (often including high-pressure pumps and engineered nozzles), which can complicate implementation and scale-up. Jung and Perrut 2001 ; Martín and Cocero 2008 To address some of these constraints, Dalvi and Mukhopadhyay developed precipitation by pressure reduction of CO 2 -expanded organic liquids (PPRGEL), where subcritical CO 2 expansion and rapid depressurization provide an additional handle to generate high transient supersaturation and drive particle formation without the same atomization pathway. Dalvi and Mukhopadhyay 2009a ; Dalvi and Mukhopadhyay 2009b Subsequent modeling and analysis quantified the large transient cooling and rapid supersaturation generation during depressurization and suggested that interfacial phenomena (e.g., gas–liquid interface effects under vigorous CO 2 ebullition) can contribute under practical conditions. Kumar et al. 2013 However, PPRGEL still requires high-pressure operation and CO 2 handling infrastructure and remains sensitive to depressurization and mixing/transport time scales, motivating complementary approaches that achieve controlled precipitation under milder processing conditions. In this context, multiple emulsions offer a structurally defined alternative: their compartmentalized microstructure can act as a confined environment for solvent exchange and precipitation within droplet domains. Jiménez-Colmenero 2013 ; Muschiolik 2007 ; Garti 1997 ; Vander

Read the complete text