Dereverberation Filter by Deconvolution with Frequency Bin Specific Faded Impulse Response
Stefan Ciba · 2026
Read Dereverberation Filter by Deconvolution with Frequency Bin Specific Faded Impulse Response by Stefan Ciba (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-06662.txt.
Introduction
Stefan Ciba builds a filter to strip room echo from sound in a 2026 paper. Echo and ring spoil a great deal of real-world sound work. His filter works on one track of sound at a time, as most clips have.
The core of the work is how he finds and tweaks the room's echo print. He starts from a known rig and known facts of the room. Early bounce and late ring are both cut from the one track. Each pitch band gets its own faded echo print in his plan. He tests the filter on real clips, not just on lab-made sound. The tool suits speech and music that were taped in poor rooms. It aims at the clips folks in fact have, flaws and all.
Catalog record
| CREATOR | Stefan Ciba |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 18 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-06662
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Dereverberation Filter by Deconvolution with Frequency Bin Specific Faded Impulse Response Stefan Ciba Abstract This work introduces a robust single-channel inverse filter for dereverberation of non-ideal recordings, validated on real audio. The developed method focuses on the calculation and modification of a discrete impulse response in order to filter the characteristics from a known digital single channel recording setup and room characteristics such as early reflections and reverberations. The aim is a dryer and clearer signal reconstruction, which ideally would be the direct-path signal. The time domain impulse response is calculated from the cepstral domain and faded by means of frequency bin specific exponential decay in the spectrum. The decay rates are obtained by using the blind estimates of reverberation time ratio between recorded output and test signals for each frequency bin. The modified impulse response does filter a recorded audio-signal by deconvolution. The blind estimation is well known and stands out for its robustness to noise and non-idealities. Application of the blind estimates for impulse response modification, in order to filter characteristics by deconvolution, offer advantages in scenarios, where adjustment for frequency bin specific reverberation and other characteristics is crucial, such as in audio production, acoustic simulation, or virtual reality applications. This filter accounts for not optimal recording conditions and can be applied as one of the first steps in processing of a single audio channel. Some real-time applications can benefit from this method, but some might need to have real-time or spatial adaption, when the impulse response changes during the record and manual recalibration process would not be an option. Estimation of a direct path signal is key to many applications. K eywords dereverberation \cdot spectral impulse response modification \cdot inverse filtering method 1 Introduction The field of digital audio signal processing has undergone significant development since the advent of digital techniques in the 1960s and 1970s, which enabled to manipulate sound with unprecedented precision and flexibility [ 1 , 2 ] . Modeling and modification of the acoustic characteristics of room and recording setups, based on convolution with impulse response , is a key technique in digital audio processing. The Linear Time Invariant (LTI) system approach consisting of convolution of a audio signal with a measured or synthesized impulse response , makes it possible to e.g. simulate reverberation, filter out early reflections, and compensate for coloration introduced by the recording chain [ 2 , 3 ] . Traditional methods for reverberation and dereverberation often rely on parametric models or sparse representations of the impulse response [ 3 , 4 ] . However, convolution with a sparse, spectrally modified impulse response , that explicitly incorporates the T60 through exponential decay function offers a direct and flexible approach for single-channel dereverberation. This method enables targeted suppression of early reflections, reverberation, and undesired recording characteristics, based on established signal processing principles. This approach differs from closely related state of the art work such as "Speech Dereverberation in the Time-Frequency Domain" [ 5 ] , "Approximation of Real Impulse Response Using IIR Structures" [ 6 ] and "Representation and Identification of Systems in the Discrete-Time Wavelet Transform Domain" [ 7 ] . 2 Signal processing 2.1 Periodic sine sweep for system identification To characterize a system, a periodic linear sine sweep (chirp) can be used as the test signal [ 8 ] . The frequency of the positive chirp increases linearly from f_{0} to f_{1} within a duration T : \acute{x}(t)=\sin\left(2\pi\left[f_{0}t+\frac{f_{1}-f_{0}}{2T}t^{2}\right]\right),\quad t\in[0,T]. (1) The signals are being sampled with the sample rate f_{s}=48 kHz and thus contain N=Tf_{s} samples, counting n=0,1,2,...N-1 . By indexing with t_{n}=\frac{n\bmod N}{f_{s}} the expression for the positive chirp becomes discrete and periodic: \acute{x}_{n}=\sin\left(2\pi\left(f_{0}t_{n}+\frac{f_{1}-f_{0}}{2T}t_{n}^{2}\right)\right). (2) The chirp vector can be further extended for P periods by array tiling: x_{n}=\bigoplus_{p=0}^{P-1}\acute{x}_{n-pN}. (3) 2.2 impulse response estimation Given discrete time series x_{n} and its recorded signal y_{n} with N samples, their relation can be described by a discrete LTI system with y_{n}=x_{n}*h_{n} [ 9 ] . Therein the impulse response h_{n} describes the signal chain, that can include unpleasant room characteristics that cause e.g. early reflections, reverberation, resonance and add non-linearity of the sensor and the loudspeaker. The impulse response can be decorrelated by deconvolution from the related signals for system identification: h_{n}=y_{n}*x_{n}^{-1}. (4) The deconvolution method of choice is the frame-wise subtraction of the test signal and the recorded signal in cepstral domain, followed by back transformation into time domain. The impulse responses are subsequently combined and normalized to get one time domain representation. The discrete time signals are split into N_{\text{frames}} frames with a frame length of N_{\text{DFT}}=5\cdot f_{s} , so the DFT size was chosen in relation to the sample rate f_{s} , for the impulse response to have a time duration that respects usual reverberation and delay time. For each frame index \eta=0,1,2,...,N_{\text{frames}}-1 the frame boundaries are shifted over the signal with hop length N_{hop}=\frac{N_{\text{DFT}}}{2} , which makes up a overlap of o=50\% . The frequency bins are counted by index \mu=0,1,2,...,N_{\text{DFT}-1} . In the same manner, the discrete time step is respected by the index \nu , to count the samples in a frame. Subbands can be expressed as angular frequency \Omega=\frac{2\pi}{N_{\text{DFT}}} times index \mu . DFT spectra are processed frame by frame with rectangular window \omega^{\text{(rect)}}_{\nu} . The complex windowed short-time spectrum is: \underline{Y}_{\mu,\eta}=\sum_{\nu=0}^{N_{\text{DFT}}-1}y_{\eta N_{hop}-\nu}\cdot\omega^{\text{(rect)}}_{\nu}e^{-j\Omega\nu}. (5) The original signal short time spectrum is \underline{X}_{\mu,\eta} . The recorded short time spectrum is \underline{Y}_{\mu,\eta} . They are regularized by |\underline{X}_{\mu,\eta}|_{\varepsilon}=\max(|\underline{X}_{\mu,\eta}|,\varepsilon) for numerical stability. The real Cepstrum is obtained by transformation as follows: C^{(x)}_{\mu,\eta}=\Re\left\{\frac{1}{N_{\text{DFT}}}\sum_{\mu=0}^{N_{\text{DFT}}-1}\ln|\underline{X}_{\mu,\eta}|_{\varepsilon}e^{j\Omega\mu}\right\}. (6) In cepstral domain the deconvolutions are accomplished by subtractions, in order to obtain the impulse responses : C^{(h)}_{\mu,\eta}=C^{(y)}_{\mu,\eta}-C^{(x)}_{\mu,\eta}. (7) The impulse responses transform back into the time domain vise versa. Although the imaginary part should be zero, only the real part is used, to prevent numerical errors: h_{\nu,\eta}=\Re\left\{\frac{1}{N_{\text{DFT}}}\sum_{\mu=0}^{N_{\text{DFT}}-1}\overbrace{e^{\left(\sum_{\mu=0}^{N_{\text{DFT}}-1}C^{(h)}_{\mu,\eta}e^{-j\Omega\mu}\right)}}^{H_{\mu,\eta}}e^{j\Omega\mu}\right\}. (8) The impulse responses accumulate by averaging: \overline{h}_{\nu}=\frac{1}{N_{\text{frames}}}\sum_{\eta=0}^{N_{\text{frames}}-1}h_{\nu,\eta}. (9) To ensure the impulse response has a consistent scale, with maximum absolute value 1 , it is normalized: h_{\nu}=\frac{\overline{h}_{\nu}}{\max_{\nu}|\overline{h}_{\nu}|}. (10) These steps yield a single, normalized impulse response , that is suitable as a good overall representation. 2.3 Spectral impulse response modification The time domain impulse response , e.g. from equation ( 10 ), is transformed by STFT, to fade frequency bins based on blind T60 estimate. 2.3.1 Blind estimation of T60 reverberation times for each bin The ISO 3382 standard [ 10 ] formally defines T60 as the time required for spatial sound energy to decay by 60 dB. This work uniquely uses blind estimate of T60 , despite the impulse response is known, to shape the impulse response for each frequency bin, targeting specific acoustic and system artifacts for deconvolution filter, which is an approach not yet found in literature. Furthermore the T60 reverberation time is a quantity that is traditionally used for measurement, characterizing and shaping room acoustics usually as a global or band-averaged parameter [ 11 ] . Ratnam et al. propose an Maximum Likelihood (ML) algorithm for a blind single-channel T60 estimate [ 12 ] . To do the frequency bin specific modifications on the impulse response , the necessary array of decay is obtained by the following procedure. The Power Spectral Density (PSD) for a discrete signal x_{n} is