Extended Target Adaptive Beamforming for ISAC: A Perspective of Predictive Error Ellipse S. Zhou, L. Xiang and K. Yang are with the State Key Laboratory of Novel Software Technology, Nanjing University, Nanjing 210008, China, and School of Intelligent Software and Engineering, Nanjing University (Su

Shengcai Zhou, Student Member, IEEE , Luping Xiang, Senior Member, IEEE , Yi Wang, Member, IEEE , Kun Yang, Fellow, IEEE , Kai Kit Wong, Fellow, IEEE , and Chan-Byoung Chae, Fellow, IEEE · 2026

Read Extended Target Adaptive Beamforming for ISAC: A Perspective of Predictive Error Ellipse S. Zhou, L. Xiang and K. Yang are with the State Key Laboratory of Novel Software Technology, Nanjing University, Nanjing 210008, China, and School of Intelligent Software and Engineering, Nanjing University (Su by Shengcai Zhou, Student Member, IEEE , Luping Xiang, Senior Member, IEEE , Yi Wang, Member, IEEE , Kun Yang, Fellow, IEEE , Kai Kit Wong, Fellow, IEEE , and Chan-Byoung Chae, Fellow, IEEE (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-06125.txt.

Introduction

Cars are not points. They are long, wide things with many spots that bounce signals back. Shengcai Zhou and 5 co-authors take that fact as their start in a 2026 paper on cars that both talk and sense by radio. A car in such a net is a spread-out target, not a dot on a map.

The team first works out how well radar can pin down a car with the waveforms and antenna grids in wide use. For the first link-up, beams train with the help of error zones drawn as ovals, which helps find the bounce points. For the next stage, the beam trims itself to the best width and tracks those points with less work. In tests, data rates rose a lot next to plain beam sweeps, most with a large antenna grid.

Catalog record

CREATORShengcai Zhou, Student Member, IEEE , Luping Xiang, Senior Member, IEEE , Yi Wang, Member, IEEE , Kun Yang, Fellow, IEEE , Kai Kit Wong, Fellow, IEEE , and Chan-Byoung Chae, Fellow, IEEE
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE69 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-06125

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Extended Target Adaptive Beamforming for ISAC: A Perspective of Predictive Error Ellipse S. Zhou, L. Xiang and K. Yang are with the State Key Laboratory of Novel Software Technology, Nanjing University, Nanjing 210008, China, and School of Intelligent Software and Engineering, Nanjing University (Suzhou Campus), Suzhou 215163, China, email: [email protected], [email protected], [email protected]. Y. Wang is with the Yangtze Delta Region Institute (Quzhou), University of Electronic Science and Technology of China, Quzhou 324003, China (e-mail: [email protected]). K.-K. Wong is with the Department of Electronic and Electrical Engineering, University College London, WC1E 7JE London, U.K., and also with the Yonsei Frontier Laboratory, Yonsei University, Seoul 03722, South Korea (e-mail: [email protected]). C.-B. Chae is with the School of Integrated Technology, Yonsei University, Seoul 03722, South Korea (e-mail: [email protected]). Shengcai Zhou, Student Member, IEEE , Luping Xiang, Senior Member, IEEE , Yi Wang, Member, IEEE , Kun Yang, Fellow, IEEE , Kai Kit Wong, Fellow, IEEE , and Chan-Byoung Chae, Fellow, IEEE Abstract Utilizing communication signals to extract motion parameters has emerged as a key direction in Vehicle-to-Everything (V2X) networks. Accurately modeling the relationship between communication signals and sensing performance is critical for the advancement of such systems. Unlike prior work that relies primarily on qualitative analysis, this paper derives the Cramér-Rao Bound (CRB) for radar parameter estimation in the context of Orthogonal Frequency Division Multiplexing (OFDM) waveforms and Uniform Planar Array (UPA) configurations. Recognizing that vehicles may act as extended targets, we propose two New Radio (NR)-V2X-compatible beamforming schemes tailored to different phases of the communication process. During the initial beam establishment phase, we develop a beamforming approach based on the union of predictive error ellipses, which enhances scatterer localization through temporally assisted beam training. In the beam adjustment phase, we introduce an adaptive narrowest-beam strategy that leverages the positions of scatterers and the communication receiver (CR), enabling effective tracking with reduced complexity. The beam design problem is addressed using the minimum enclosing ellipse algorithm and tailored antenna control methods. Simulation results validate the proposed approach, showing up to a 32.4 % \% improvement in achievable rate with a 32 × \times 32 transmit antenna array and a 5.2 % \% gain with an 8 × \times 8 array, compared to conventional beam sweeping under identical SNR conditions. I Introduction I-A Background Next-generation wireless communication technologies demand low-latency, high data rate, and high-precision positioning services in high-mobility scenarios [ 1 ] . However, existing technologies, such as Dedicated Short Range Communication (DSRC), Cellular V2X (C-V2X), and Global Navigation Satellite Systems (GNSS), are unable to simultaneously meet these stringent requirements [ 2 ] . On the other hand, Integrated Sensing and Communication (ISAC) technology, by sharing spectrum, hardware platforms, baseband waveforms, and signal processing, allows for the simultaneous execution of sensing and communication functions [ 3 , 4 , 5 , 6 ] . Therefore, ISAC is seen as one of the major emerging technologies for 6G [ 7 , 8 ] . With the assistance of ISAC technology, Vehicle-to-Everything (V2X) communication, which is typically deployed in high-mobility scenarios, has been the subject of many research efforts [ 9 , 10 , 11 , 2 , 12 , 13 , 14 ] . In [ 9 ] , Liu et al. proposed a sensing-assisted downlink communication framework that utilizes an integrated waveform to acquire sensing information while transmitting communication data, thus reducing the overhead of pilots. Furthermore, Meng et al. and Du et al. conducted in-depth studies from the perspectives of complex roads [ 10 ] and extended targets [ 11 ] , proposing targeted beam tracking approaches. To quantify and optimize the reduction of pilots, Li et al. introduced a sensing-assisted New Radio (NR)-V2X frame structure [ 2 ] . Additionally, based on the concept of hierarchical beam training [ 13 ] , Zhou et al. developed a temporal-assisted beamforming scheme [ 12 , 15 ] . A recent work of Li et al. have designed low-complexity beamforming algorithms [ 14 ] . Despite the different perspectives, the above literature leverage massive Multiple-Input Multiple-Output (mMIMO) antennas and millimeter Wave (mmWave) technologies to achieve high beamforming gains, thereby promoting high-quality communication and sensing. Therefore, waveform design based on ISAC holds great promise. This paper investigates an adaptive beamforming scheme compatible with NR standards. I-B Related Work Some studies have focused on the separation of communication users and sensing targets [ 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 ] . Li et al. addressed the cross-layer trade-offs in time-division sensing and communication resource, assigning time slot to different targets during the sensing period and scheduling multiple users through a cycling protocol during the communication period [ 16 ] . In addition, Liu et al. examined joint transmission design for MIMO radar and downlink multi-user communication systems, focusing on the Signal to Interference plus Noise Ratio (SINR) balance in transmit beamforming and Dirty Paper Coding (DPC) mechanisms [ 17 ] . However, their approaches failed to unify the communication and radar waveforms. Hua et al. investigated integrated waveforms, considering an ISAC scenario involving a target and a multi-antenna user, with various sensing Cramér-Rao Bound (CRB)-related metrics to illustrate the trade-off between CRB and data rate [ 24 ] . Meanwhile, Wu et al. explored the design of a Quantized Constant-Envelope (QCE) integrated waveform for mMIMO ISAC systems, the waveform design problem was formulated to meet communication constraints based on constructive interference and QCE constraints [ 28 ] . However, all the above-mentioned work do not account for the collaborative gains in ISAC. Based on collaborative gains, research on sensing-assisted communication has been rapidly developed, with a focus on scenarios where the communication and sensing targets are the same [ 9 , 10 , 11 , 29 , 30 , 2 , 31 ] . Regarding target shape, Liu et al. modeled vehicles as point targets and considers the downlink communication for the road side unit (RSU) serving vehicles [ 9 ] . It proposed a sensing-assisted beam tracking method, which estimates the vehicle’s motion parameters from ISAC echoes and then aligns the beam using Extended Kalman Filtering (EKF). Similarly, Meng et al. modeled complex road geometries and proposed a curvilinear coordinate system with an Interacting Multiple Model (IMM)-based filtering scheme for vehicle tracking and identification [ 10 ] . However, these works do not address extended targets. A sensing-assisted beam tracking method for extended vehicle was introduced by Du et al. , who presented an ISAC-based dynamic beamforming scheme [ 11 ] . Given that the Communication Receiver (CR) of the extended target cannot be tracked directly, the transmission beam needs to illuminate all scatterers, as partial illumination may not guarantee beam alignment with the CR. The dynamic beam scheme adjusts the beam according to the relative position of the vehicle and the RSU to ensure full vehicle coverage. To improve achievable rate, Du et al. also proposed an ISAC-based alternating wide-narrow beam scheme. This is necessary, because when the vehicle is too close, the RSU beam become too wide, resulting in reduced achievable rate. The scheme reallocates resources for each slot, ensuring that the RSU first designs

Read the complete text