The effect of normal stress on stacking fault energy in face-centered cubic metals
Yang Li, Yuri Mishin · 2026
Read The effect of normal stress on stacking fault energy in face-centered cubic metals by Yang Li, Yuri Mishin (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-05453.txt.
Introduction
Yang Li and Yuri Mishin report, in a 2026 materials paper, how stress pointing through a metal surface changes stacking fault energy. Stacking faults are errors in the regular stacking of atomic planes, and they shape how face-centered cubic metals deform and crack. The stress studied acts perpendicular to the close-packed plane.
Using density functional theory calculations on aluminum, nickel, copper, silver, gold, and platinum, the team found a consistent pattern. Compression raised both stable and unstable fault energies, while tension lowered them. Many classical and machine-learning potentials predicted the wrong trend, sometimes the opposite one. The paper discusses how such potentials could be improved to capture this effect.
Catalog record
| CREATOR | Yang Li, Yuri Mishin |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 79 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-05453
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
The effect of normal stress on stacking fault energy in face-centered cubic metals Yang Li, Yuri Mishin Abstract Plastic deformation and fracture of FCC metals involve the formation of stable or unstable stacking faults (SFs) on (111) plane. Examples include dislocation cross-slip and dislocation nucleation at interfaces and near crack tips. The stress component normal to (111) plane can strongly affect the SF energy when the stress magnitude reaches several to tens of GPa. We conduct a series of DFT calculations of SF energies in six FCC metals: Al, Ni, Cu, Ag, Au, and Pt. The results show that normal compression significantly increases the stable and unstable SF energies in all six metals, while normal tension decreases them. The SF formation is accompanied by inelastic expansion in the normal direction. The DFT calculations are compared with predictions of several representative classical and machine-learning interatomic potentials. Many potentials fail to capture the correct stress effect on the SF energy, often predicting trends opposite to the DFT calculations. Possible ways to improve the ability of potentials to represent the stress effect on SF energy are discussed. Keywords: FCC metals, stacking faults, DFT calculations, interatomic potentials 1 Introduction A generalized stacking fault (GSF) is a planar defect created by sliding one part of a single crystal past another along a given atomic plane in a particular crystallographic direction [ 1 ] . The GSF energy (GSFE) describes the variation in potential energy per unit area as a function of the translation vector [ 2 , 3 , 4 , 5 ] . GSFE governs the dislocation behavior during plastic deformation and fracture of crystalline materials [ 1 , 6 ] . It constitutes the critical input to the Peiers-Nabarro model [ 1 , 7 , 8 , 9 , 10 , 11 ] and phase field dislocation dynamics simulations [ 12 , 13 , 14 ] . In face-centered cubic (FCC) metals, the most important GSF is obtained by sliding (111) atomic planes past each other in a \left\langle 211\right\rangle direction. The GSFE has a local minimum at the translation \mathbf{u}=a[11\bar{2}]/6 , where a is the cubic lattice constant. This minimum is separated from the perfect crystalline state ( \mathbf{u}=0 ) by a local maximum. The metastable state corresponding to the energy minimum represents the intrinsic stacking fault (SF) whose energy (SFE) is one of the most fundamental properties of FCC metals [ 15 , 1 ] . The maximum corresponds to the unstable stacking fault (USF) whose energy (USFE) also plays an important role in many mechanical processes. For example, the SFE affects the dissociation width of full dislocations into Shockley partials. This width largely controls the dislocation cross-slip because the partials must recombine (thus eliminating the SF) before the dislocation can change the glide plane. The USFE controls the nucleation of dislocations at a crack tip [ 7 , 16 ] and at surfaces and internal interfaces [ 17 ] . USFE is especially important in dislocation nucleation-controlled plasticity, which dominates the mechanical behavior of nanowires [ 18 , 19 , 20 ] , pristine nanoparticles [ 21 , 22 , 23 ] , and similar defect-free nanoscale objects. GSFE can be altered by an applied stress [ 24 , 25 ] . The most accurate investigations of the stress effect on GSFE utilize first-principles density functional theory (DFT) calculations. Brandl et al. [ 26 ] applied DFT calculations to study the GSFE in Al, Ni, and Cu under isotropic and shear strains. They found that under isotropic volume strain, the SFE of all three metals decreases with increasing volume, with Cu and Ni being less sensitive to the volume changes than Al. Under volume-conserving shear strain, the USFE of Ni and Al increases while the SFE decreases. In contrast, the GSFE curves for Cu exhibit only minor changes. Branicio et al. [ 27 ] computed the SFE in Cu under volumetric, uniaxial, and shear strains. It was found that under uniaxial strain applied along the [111] direction, the SFE of Cu increases as the strain changes from tension to compression. Andric et al. [ 28 ] analyzed the tensile stress dependence of the GSFE in Ni, Cu, Al, and Mg. Their DFT calculations have shown that in all three metals, the SFE decreases with increasing tensile stress normal to (111) planes. * * * Andric et al. [ 28 ] considered two different definitions of GSFE. The thermodynamically consistent definition of GSFE in the presence of applied stresses (see section 2.1 below) corresponds to what they called the GSF enthalpy. Interatomic potentials have also been employed to study GSFEs under applied stresses. For example, calculations with an embedded-atom potential for Cu have shown that compressive (tensile) stress normal to the SF increases (decreases) the USFE and decreases (increases) the SFE [ 29 ] . The latter trend contradicts the DFT calculations [ 27 , 28 ] . Similar results were obtained in a more recent study by Zhang et al. [ 30 ] , who investigated the effect of stress on GSFE using embedded-atom potentials for Cu, Al, and Ni. When uniaxial stress ranging from -5 GPa to 5 GPa was applied along the [111] direction, the USFE was found to increase as the stress changed from tension to compression. As will be shown later in this paper, this response is qualitatively consistent with DFT calculations. The SFE of Al also increased as the stress changed from tension to compression, which is also consistent with DFT calculations. However, the SFE in Cu and Ni decreased as the stress changed from tension to compression instead of increasing. Significant disagreements between potential predictions and DFT calculations for the stress effect on SFE were also reported by other authors [ 27 , 28 ] . Such disagreements are highly alarming because the large-scale computer simulations of deformation and fracture of materials rely on interatomic potentials. The reliability of such simulations depends on the potential’s ability to faithfully represent the impact of applied stresses on the GSFE and thus the dislocation behavior. This is especially important for the simulations of nano-mechanical processes involving high stresses on the level of tens of GPa or higher, including shock deformation and the deformation and failure of nanowires and defect-free nanoparticles. There is a pressing need to understand the extent and origin of the mentioned disagreements and find ways to reduce them. In this work, we perform a systematic DFT investigation of the effect of normal stress on GSFE in FCC metals, focusing on the energies of the stable and unstable faults (SFE and USFE). We additionally investigate the effect of normal stress on the shear modulus and Poisson’s ratio of the metal. The reason for including the elastic properties is that the dislocation dissociation width is controlled by the balance between the elastic repulsion between the Shockley partials and the SF tension. Thus, predictions of the stress effect on the dissociation width require the knowledge of both factors. The calculations are performed for six FCC metals representing simple metals (Al), noble metals (Cu, Ag, Au, and Pt), and transition metals (Ni). The DFT results are compared with a set of representative interatomic potentials for these metals. We