Processing-Dependent Near-Field Radiative Heat Transfer at Au/SiC Interfaces
A. Márquez, R. Esquivel-Sirvent · 2026
Read Processing-Dependent Near-Field Radiative Heat Transfer at Au/SiC Interfaces by A. Márquez, R. Esquivel-Sirvent (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-04452.txt.
Introduction
A. Márquez and R. Esquivel-Sirvent show that a routine bake can retune how heat jumps a vacuum gap at the nanoscale, in a 2026 arXiv paper. When surfaces sit tens of nanometres apart, heat travels as evanescent electromagnetic waves rather than ordinary radiation, and the flow depends on the materials' optical losses. Gold films on silicon carbide are their test case, and thermal annealing is the knob.
Feeding measured dielectric functions for annealed and unannealed gold into a fluctuational electrodynamics calculation, they find annealing's changes to low-frequency losses strengthen the coupling of overdamped plasmonic surface modes at the interface. The total near-field heat transfer rises by up to roughly forty percent at those small separations. Because nothing about the materials or geometry changes, the result offers designers a simple processing lever for nanoscale thermal and plasmonic devices.
Catalog record
| CREATOR | A. Márquez, R. Esquivel-Sirvent |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 22 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-04452
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Processing-Dependent Near-Field Radiative Heat Transfer at Au/SiC Interfaces Preprint: APS/123-QED A. Márquez, R. Esquivel-Sirvent Abstract Thermal annealing is a widely used thin-film processing technique for modifying interfacial optical losses and electronic scattering in plasmonic materials. Here, we investigate how thermal annealing of gold thin films deposited on silicon carbide substrates influences interfacial near-field radiative heat transfer across nanoscale vacuum gaps. Using experimentally measured dielectric functions for annealed and unannealed Au films, we evaluate the spectral and total radiative heat flux between Au/SiC interfaces within a fluctuational electrodynamics framework. We show that annealing-induced changes in the low-frequency dielectric losses of Au significantly alter evanescent electromagnetic coupling at the interface, leading to enhancements of up to 40% in the total near-field radiative heat transfer at separations of tens of nanometers. Mode-resolved analysis reveals that this enhancement originates from strengthened coupling of overdamped plasmonic surface modes, which are highly sensitive to thin-film processing and interfacial microstructure. These results demonstrate that standard thermal annealing provides a practical route for tuning interfacial radiative heat transfer in metallic thin-film systems without modifying material composition or geometry, offering guidance for the design and interpretation of nanoscale thermal and plasmonic interfaces. I Introduction Near-field radiative heat transfer between two surfaces refers to the radiative heat exchange when two bodies at different temperatures are separated by a vacuum gap smaller than Wien’s thermal wavelength Hargreaves 1969 . Unlike the far-field case, described by the Stefan-Boltzmann law for gray bodies, in the near field, radiative heat transfer depends on the separation between the bodies. It can be several orders of magnitude larger than that predicted for black bodies in the far field Song et al. 2015 ; Rousseau et al. 2009a . This phenomenon is explained by Rytov’s theory of fluctuating electrodynamics Vinogradov and Dorofeev 2009 , which accounts for the contributions of both propagating and evanescent electromagnetic modes between the bodies Pendry 1999 . The NFRHT has been extensively verified through several experiments Song et al. 2015 ; Rousseau et al. 2009a ; Ottens et al. 2011 ; Francoeur 2015 ; St-Gelais et al. 2014 . The interest in understanding the role of different materials, such as metasurfaces, 2D Esquivel-Sirvent et al. 2023 ; Gusso et al. 2024 , and topological materials Didari-Bader et al. 2024 , is due to the potential applications of NFRHT. Examples include the search for high-power density and high-efficiency energy conversion platforms Mittapally et al. 2021 , controlled heat extraction and energy recycling Bhatt et al. 2020 , nanoscale thermal transistors Ben-Abdallah and Biehs 2014 , thermal logic devices Ben-Abdallah et al. 2015 , and thermal management Lim et al. 2024 among others. These examples are not an exhaustive review, but rather a sampler of recent achievements in near-field heat transfer. Two experimental studies on NFRHT caused some controversy owing to the disparity in their results. The experiments conducted by Reddy et al. Cui et al. 2017 demonstrated good agreement with theory. In contrast, Kittel et al. Kittel et al. 2005 predicted NFRHT values four orders of magnitude above theoretical predictions. Both experiments measured NFRHT for separations less than 10 nm between Au-coated tips and an Au substrate. The differences in results have been attributed to possible sample contamination or other effects, such as phonon tunneling, which are not considered in the current NFRHT theory. The discrepancies between these experiments demonstrate the need to identify confounders in NFRHT measurements. Some of the possible confounders reported in the literature Song et al. 2015 ; Kim et al. 2015 are distance measurement and control Rousseau et al. 2009b , residual far field radiation, variations in stability and separation due to the presence of Casimir forces Volokitin and Persson 2007 , variations in dielectric properties and film thickness Francoeur et al. 2008 . Annealing and quenching of thin metallic films is a common post-deposition thermal treatment in surfaces used to modify the microstructure and optical properties of the surface Totten et al. 1993 . In annealing, the film is heated to an elevated temperature and held for a controlled time, allowing atomic rearrangement that promotes grain growth, reduces internal strain, and decreases defect density. Quenching corresponds to the rapid cooling that follows, which can preserve the modified microstructure or, depending on the cooling rate, introduce new strain and small-scale disorder. The annealing and quenching of metallic layers deposited on a substrate change the surface morphology and thus its optical properties depending on such factors as annealing time Švorčík et al. 2011 , temperature, sputtering time, and substrate where the films are deposited Syed et al. 2018 ; Alonzo-Medina et al. 2013 ; Vook and Witt 1965 . The structural and electronic properties of surfaces Huang et al. 2010 are also affected. This in turn affects their dielectric function. Surface quality and annealing can affect the surface plasmon resonances Sambles et al. 1991 . This can be explain due to an atomic rearrangement of the surface atoms, promoting grain growth, and the reduction of defects. Quenching, can lock in these structural changes or, depending on the rate, introduce new strain and defects. Most prior studies of near-field radiative heat transfer (NFRHT) have emphasized the role of material selection—such as metals, polar dielectrics, and low-dimensional systems—or geometric design strategies including nanogaps, gratings, and multilayer architectures. While the influence of surface morphology and electronic scattering on optical response is well known Song et al. 2015 ; Rousseau et al. 2009a ; Ottens et al. 2011 ; Francoeur 2015 ; St-Gelais et al. 2014 , the specific impact of standard post-deposition thermal processing on near-field radiative exchange has received comparatively less systematic attention. In particular, annealing and quenching are routinely employed in thin-film fabrication to modify microstructure and low-frequency dielectric losses, yet their consequences for evanescent electromagnetic coupling remain incompletely quantified. By directly incorporating experimentally measured dielectric functions of annealed and unannealed Au films into NFRHT calculations, this work clarifies how thermal post-processing influences near-field energy transfer and highlights processing history as a relevant parameter when interpreting and comparing near-field heat-transfer experiments. II Processing-Dependent Dielectric Function of Au Thin Films All dielectric functions used in this work are taken directly from independent experimental measurements of annealed and unannealed Au thin films; consequently, no adjustable or fitted parameters are introduced in the near-field radiative heat-transfer calculations. Specifically, we adopt the experimentally measured optical properties reported by Shen et al. Shen et al. 2016 , who systematically characterized the influence of thermal annealing and quenching on the dielectric response of Au over a broad temperature range. In Ref. Shen et al. 2016 , Au films were deposited by electron-beam evaporation using gold with 99.99% purity. The films were subsequently annealed by heating the samples at 600 K for 15 min. Dielectric function measurements were reported at three temperatures: 300, 450, and 570 K, from which the corresponding optical parameters were extracted and are used here as fixed inputs. For use in the near-field radiative heat-transfer calculations, the experimentally measured dielectric functions reported in Shen et al. 2016 are represented using a Drude–Lorentz model. This is, \epsilon(\omega)=\epsilon_{\infty}-\frac{f_{0}\omega_{p}^{2}}{\omega^{2}+i\omega\gamma}+\sum_{m=1}^{5}\frac{f_{m}\omega_{p}^{2}}{\omega^{2}_{m}-\omega^{2}+i\omega\Gamma_{m}}, (1) which includes the oscillator strength f_{0} , the high-frequency dielectric function \epsilon_{\infty} , the plasma frequency \omega_{p} , and the phenomenological electronic damping \gamma . The