Solar Panel-based Visible Light Communication for Batteryless Systems
Juan F. Gutiérrez, Nhung Nguyen, Jesús M. Quintero, Andres Gomez · 2026
Read Solar Panel-based Visible Light Communication for Batteryless Systems by Juan F. Gutiérrez, Nhung Nguyen, Jesús M. Quintero, Andres Gomez (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-04190.txt.
Introduction
Juan F. Gutierrez, Nhung Nguyen, Jesus M. Quintero, and Andres Gomez build a wireless node that runs on light alone and also receives data by light. Their target is the Internet of Things, where batteries limit where nodes can go. A solar panel does double duty, harvesting energy and acting as the antenna for signals from LED sources.
A light analogue front end cleans and digitises the signal for a small eight-bit processor, which wakes the main processor only when stored energy allows. Reception is timed to the harvester's open-circuit phase, which cuts interference and sharpens the signal. The prototype decodes short frames reliably at the stated rate, uses only a few millijoules per frame, and sleeps at very low power, the four authors report.
Catalog record
| CREATOR | Juan F. Gutiérrez, Nhung Nguyen, Jesús M. Quintero, Andres Gomez |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 14 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-04190
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Solar Panel-based Visible Light Communication for Batteryless Systems Juan F. Gutiérrez, Nhung Nguyen, Jesús M. Quintero, Andres Gomez Abstract This paper presents a batteryless wireless communication node for the Internet of Things, powered entirely by ambient light and capable of receiving data through visible light communication. A solar panel serves dual functions as an energy harvester and an optical antenna, capturing modulated signals from LED light sources. A lightweight analog front-end filters and digitizes the signals for an 8-bit low-power processor, which manages the system’s operational states based on stored energy levels. The main processor is selectively activated to minimize energy consumption. Data reception is synchronized with the harvester’s open-circuit phase, reducing interference and improving signal quality. The prototype reliably decodes 32-bit VLC frames at 800 Hz 800\text{\,}\mathrm{Hz} , consuming less than 2.8 mJ 2.8\text{\,}\mathrm{mJ} , and maintains sleep-mode power below 30 μ \mu W. 1 Introduction In modern IoT systems, low-power embedded devices are critical to enabling long-term autonomous operation in environments where frequent maintenance or a reliable power supply is not feasible. One notable advancement is the development of batteryless sensing nodes, which harvest ambient energy such as solar energy harvesting, RF energy harvesting, or mechanical vibrations to power their sensing and communication tasks [ 5 ] . The harvester not only commences a cold start with minimum input power but also regulates voltage and handles energy storage, ensuring stable operation under sporadically available energy conditions. One of the main obstacles in energy-constrained embedded systems is data reception without significantly increasing energy consumption. Traditional radio frequency (RF) receivers frequently require complicated analog front-ends and high-frequency clocks, resulting in significant standby and active power overhead [ 3 ] . In contrast, Visible Light Communication (VLC) provides a low-power alternative, with simple photodiodes and low-complexity digital circuits used to receive [ 6 ] . In addition, it allows the solar panel to function as both an energy harvester and a receiver, reducing additional hardware and power expenditures.However, the entire potential of VLC reception is still underused. With reliable VLC-based data reception, embedded devices may perform operations such as remote reconfiguration, firmware updates, all without relying on power-hungry radios. These characteristics are especially useful for maintenance-free IoT deployments in remote places. Few studies have looked at batteryless IoT devices, MiroCard and DPP3E being notable examples. The active period of MiroCard is limited to a few milliseconds due to the usage of two 47\text{\,}\mathrm{\SIUnitSymbolMicro F} capacitors and communicates with BLE, Zigbee, 6LoWPAN and RF4CE through a 2.4\text{\,}\mathrm{GHz} inverted F antenna. DPP3E provides higher energy autonomy using configurable supercapacitors, uses an Apollo3 Blue Plus MCU with BLE and an AMCA31 chip antenna, as well as an STM32L433 and Semtech SX1262 LoRa transceiver for long-range communication [ 4 , 1 ] . Another recent research presented batteryless sensor nodes powered by indoor light harvesting, using either BLE or combined VLC/IR communication. The VLC/IR approach, despite higher energy consumption than BLE, but higher accuracy data retention [ 2 ] . To enhance adaptability, we propose a hybrid architecture combining BLE for frequent updates with VLC for robust, energy-efficient downlink control, achieving responsiveness and efficiency. This paper presents a batteryless BLE node powered exclusively by a solar-based energy harvester. VLC signals received through the solar panel are detected by a low-power 8-bit processor via GPIO, which monitors channel activity and selectively wakes the main processor. Depending on channel conditions, the main processor executes either a BLE or VLC decoding application. Our prototype, implemented using a Texas Instruments CC1352P1 LaunchPad with Zephyr RTOS, successfully demonstrates reliable reception and decoding of 32-bit VLC frames at 800\text{\,}\mathrm{Hz} of optical clock. The reception of VLC data is carried out during the open-circuit state of the energy harvester, which enhances signal quality by minimizing interference. 2 System design and Implementation 2.1 System Design The proposed system consists of a VLC transmitter and a batteryless VLC-BLE receiver node designed for energy harvesting and indoor communication. The block diagram of the proposed system is presented in Figure 1(a) . The diagram illustrates the overall architecture of the system, including an energy harvester with a storage element, the analog front-end, and an MCU platform comprising a main processor and a dedicated low-power coprocessor. The transmitter uses a white LED based on phosphor to enable VLC transmission at frequencies above 800 Hz while maintaining standard indoor lighting conditions. The detection of the VLC frame is coordinated with the open-circuit phase of the harvester. This timing reduces the switching noise on the sensing channel, enabling a more accurate sampling of the incoming optical signals. The VLC frame contains two parts, including a preamble, which is a fixed indicator of eights bits, and 24\text{\,}\mathrm{b}\mathrm{i}\mathrm{t}\mathrm{s} of the payload. During the open-circuit phase of the harvester, which lasts 82\text{\,}\mathrm{ms} , the system is able to receive a full data frame transmitted at an optical clock rate 800\text{\,}\mathrm{Hz} . Another portion inside the VLC frame is used for the sensing channel which allows for detecting the presence of VLC transmission, allowing the coprocessor to trigger an alert interrupt to the MCU and decide to run the main application or initiate VLC decode. (a) Components of battery-less VLC (b) Analog front-end circuit Figure 1 : Batteryless VLC Node Architecture and Analog Front-End Design The batteryless node uses a conventional solar panel, sized to make the device pocket-portable. The analog front-end is designed to filter out the DC component of the solar panel voltage and condition the signal into a range suitable for detection by the MCU. Figure 1(b) shows the analog front-end circuit, which includes a high-pass filter with a cutoff frequency of approximately 215\text{\,}\mathrm{Hz} . The energy harvester efficiently stores the energy collected from the solar panel in a capacitor and provides a stable output voltage to power the MCU. In this design, the capacitor voltage is monitored to ensure that either the main application or the VLC application is executed only when sufficient energy is available, thus preventing MCU shutdown due to excessive energy consumption. A voltage divider scales the capacitor voltage to a range compatible with the MCU’s ADC input. Inside the MCU, two processors are used: a low-power coprocessor for continuous monitoring and a main processor for application execution. The low-power coprocessor is activated using the open-circuit indicator signal from the harvester chip to sampling the capacitor voltage. If the capacitor voltage is high enough, the low-power processor samples the digital output signal from the analog front-end during the open-circuit sampling window of the harvester. Based on this sampled data, it decides whether to run the main application or the VLC application and then wakes up the main processor accordingly. The main processor runs either a main application, which transmits a broadcast BLE packet, or a VLC application, which decodes information from the VLC frame and then sends a BLE packet based on the received data, creating a VLC-BLE echo node. 2.2 Implementation The hardware structure of the VLC-BLE node was implemented on a Texas Instruments LaunchPad CC1352P1 development board, which includes a dedicated low-power 8-bit coprocessor optimized for low power consumption and efficient peripheral operation, capable of running independently of the main processor. The energy harvesting module was performed using an e-Peas AEM10941 chip with maximum