Dilatancy-induced surface deformation in dense cohesive granular media
Huzaif Rahim, Thorsten Pöschel, Sudeshna Roy · 2026
Read Dilatancy-induced surface deformation in dense cohesive granular media by Huzaif Rahim, Thorsten Pöschel, Sudeshna Roy (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-01172.txt.
Introduction
Huzaif Rahim, Thorsten Poeschel, and Sudeshna Roy study wet sand-like material as it is sheared. When dense grains are packed tight and then pushed sideways, they must spread apart to move, an effect called dilatancy. Liquid bridges between grains pull them together and make this spreading stronger. In a split-bottom cell, the team watches a narrow shear band form and the surface above it rise.
Surface lift shows up across a wide range of packing densities and liquid strengths, not only at the high end. A single combined measure, the equivalent Bond number, turns out to govern both how the surface profile grows and how the packing density changes. At faster shear, inertia takes over and the surface lift fades. The findings help predict how damp powders and soils deform in handling, mixing, and natural flows.
Catalog record
| CREATOR | Huzaif Rahim, Thorsten Pöschel, Sudeshna Roy |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 18 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-01172
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Dilatancy-induced surface deformation in dense cohesive granular media Huzaif Rahim, Thorsten Pöschel, Sudeshna Roy Abstract When granular materials with interstitial liquid bridges are sheared in a split-bottom cell, a localized shear band develops, accompanied by a surface elevation. Cohesion, governed by the surface tension of the interstitial liquid, enhances dilatancy in dense cohesive packings, leading to expansion within the shear band and the emergence of a surface elevation. Surface deformation is observed not only in cohesive systems with high particle density and large liquid surface tension, but also in those with lower values of these parameters. The equivalent Bond number arises as a key control parameter for the surface deformation, shaping both the evolution of the surface profile and the packing density. At higher shear rates, inertial effects dominate dilatancy, resulting in less pronounced surface deformation. I Introduction Cohesive granular materials have attracted considerable attention owing to their significance in industrial applications and geophysical phenomena. 5 ; 26 Particles in cohesive granular materials experience both cohesive and frictional interactions, with cohesion amplifying the frictional contribution to dilation. Cohesion, therefore, plays a critical role in determining the response of these materials to external forcing under shear. 23 ; 24 ; 10 ; 13 Cohesive particles typically pack less densely than non-cohesive 23 \color green . For example, the packing density of dry glass beads is around 0.6 but decreases to \sim 0.3 when cohesion is present. 9 ; 27 Strong cohesion disrupts uniform packing, leading to particle clustering and non-uniform density, which in turn causes shear band widening, velocity fluctuations, and dilation or compression. 1 ; 23 ; 11 A notable phenomenon that has attracted considerable attention is the emergence of secondary flows driven by dilation in granular shear flows. Previous studies by Dsouza and Nott 8 and Krishnaraj and Nott 14 provided key insights into the secondary flows of frictional particles in split-bottom shear cells. Building on this foundation, the present work examines flows in cohesive granular materials, with particular emphasis on the role of cohesion-induced dilation. We investigate the interplay between cohesion and dilation in wet granular materials. Cohesion is introduced through capillary bridges, with the liquid’s surface tension varied to control its intensity. By systematically varying cohesion within the granular assembly, we analyze its influence on dilation and flow patterns. We also examine how shear rate affects flow behavior and dilation in cohesive granular materials. II Model II.1 Split-bottom shear cell The linear split-bottom shear cell (LSC) consists of two L-shaped walls that slide past each other at velocities \pm V_{\text{shear}}/2 . The system size is (L_{x},L_{y},L_{z})=(20,80,25)d_{\text{p}} , with filling height H\approx 20d_{\text{p}} , where d_{\text{p}} is the mean particle diameter. Gravity g acts in the negative z -direction. Figure 1 sketches the shear cell and defines the coordinate system. This is a well-known geometrical setup for studying the rheology of granular materials; similar geometry is used in many previous works. 20 ; 21 ; 6 Figure 1 : Linear split-bottom shear cell The particle diameters are uniformly distributed in [0.83,1.24]\,\text{mm} with mean d_{\text{p}}=1.035\,\text{mm} . The total volume of particles inserted into the simulation domain is scaled by a packing efficiency factor of 0.64 , which represents the expected solid volume fraction after random deposition and avoids unrealistically dense initial packings. II.2 Particle contact model II.2.1 Hertz - Mindlin visco - elastic contact model For simulating particle dynamics, we use the discrete element (DEM) program MercuryDPM. 29 For the details of DEM, we refer, e.g., to Refs. 15 ; 19 . For the particle-particle interaction force, we assume the Hertz-Mindlin no-slip contact model. 7 The normal force component is 4 ; 19 \vec{F}^{\text{n}}_{ij}=\min\left(0,-\rho\xi_{i,j}^{3/2}-\frac{3}{2}A^{\text{n}}_{i,j}\rho\sqrt{\xi_{i,j}}\dot{\xi}_{i,j}\right)\vec{e}^{\text{\,n}}\,, (1) where \xi_{i,j}=R_{i}+R_{j}-|\vec{r}_{i}-\vec{r}_{j}| is the compression of two interacting particles i , j of radii R_{i} and R_{j} at positions \vec{r}_{i} and \vec{r}_{j} and \vec{e}^{\text{\,n}}=(\vec{r}_{i}-\vec{r}_{j})/|\vec{r}_{i}-\vec{r}_{j}| is the normal unit vector. Further, we use the damping constant A^{\text{n}}_{i,j}=5\times 10^{-6} s. This value corresponds to a coefficient of restitution of 0.7 for two granular particles with elastic modulus E=5 MPa and diameter d_{\text{p}} impacting at a velocity of 0.016\,\text{m/s} . 17 For higher impact velocities (up to 0.16 m/s), the damping constant is recalculated accordingly to maintain a consistent coefficient of restitution. The elastic constant is given by 4 \rho_{i,j}=\frac{4}{3}\,E^{*}_{i,j}\,\sqrt{R^{*}} (2) where E^{*}_{i,j} is the effective elastic modulus, and R^{*} is the effective radius. We model the tangential viscoelastic forces using a path-dependent approach, which accounts for the history of tangential displacement between contacting particles. This follows the no-slip solution of Mindlin 16 for the elastic component and the formulation by Parteli and Pöschel 18 for the tangential dissipative constant ( A^{\text{t}}_{i,j}\approx 2A^{\text{n}}_{i,j}\,E^{*}_{i,j} ). The tangential force is capped by the static friction limit between particles (Coulomb law), \vec{F}^{\text{t}}_{i,j}=-\min\!\!\!\left[\!\mu\left|\vec{F}^{\text{n}}_{i,j}\right|,\!\!\int\limits_{\text{path}}\!\!\!8G^{*}_{i,j}\sqrt{R^{*}_{i,j}\xi_{i,j}}\,\text{d}s+A^{\text{t}}_{i,j}\sqrt{R^{*}_{i,j}\xi_{i,j}}v^{\text{t}}\!\right]\!\!\vec{e}^{\text{\,t}}\,, (3) where \mu is the friction coefficient, G^{*}_{i,j} is the effective shear modulus. The integral is evaluated over the tangential displacement path, where ds=|\mathbf{v}_{i,j}^{t}|\,dt is the incremental tangential relative displacement at the contact point, accumulated from the onset of contact until separation. 18 II.2.2 Liquid bridge contact model The nonlinear capillary force depends on particle size, contact properties, liquid properties, and the liquid saturation level in the system. Specifically, it is governed by three key parameters: the surface tension, \gamma , which determines the maximum adhesive force, the contact angle, \theta , and the liquid bridge volume, V_{\text{b}} , which also defines the maximum interaction distance between particles at the point of bridge rupture (rupture distance). 30 ; 2 ; 3 The adhesive capillary force between particles i and j , denoted \vec{F}_{i,j}^{\text{c}} , is modeled using the approximations by Willett et al. 30 based on the particle specifications, contact properties, liquid properties, and liquid saturation in the system, \vec{F}_{i,j}^{\text{c}}=\frac{F^{\text{c}}_{\text{max}}}{\sqrt{1+1.05\overline{S}_{i,j}+2.5\overline{S}_{i,j}^{2}}}\vec{e}^{\text{\,n}}\,, (4) with the normalized distance between the surfaces of the particles \overline{S}_{i,j}=\max\left(0,-\xi\right)\sqrt{\frac{d_{\text{p}}}{V_{\text{b}}}} (5) and F^{\text{c}}_{\text{max}}=\pi{d_{p}}\gamma\cos{\theta} . To study the effect of cohesion in unsaturated granular materials, we simulate the system for a range of surface tensions, \gamma\in\{0,0.02,0.04,0.06,0.08,0.16\}\,\text{N/m} . II.3 Material and process parameters Unless stated otherwise, all simulations were performed using the standard parameters listed in Table 1 . In selected simulations \color green , alternative values of the shear rate, particle density, or surface tension were employed. Table 1 : DEM standard simulation parameters variable unit value elastic modulus ( E ) MPa 5 sliding friction coeff. ( \mu_{s} ) - 0.10 rolling friction coeff. ( \mu_{r} ) - 0.005 contact angle ( \theta ) degree 20 liquid bridge volume ( V_{\text{b}} ) nl 100 particle density ( \rho_{\text{p}} ) \text{kg/m}^{3} 2000 surface tension ( \gamma ) N/m 0-0.16 shear rate ( V_{\text{shear}} ) m/s 0.016 III Coarse graining We employ the coarse-graining scheme by Strobl et al. 25 as implemented in MercuryCG 28 to compute the macroscopic fields through the exact evaluation of the intersections between the spheres and the triangulated domain. This approach yields a precise value of the local solid fraction, enabling highly accurate measurements of the packing density. We simulated the process for 300\,\text{s} . The macroscopic fields are then obtained by averaging over the (periodic) x -direction during the interval t\in(250,300)\,\text{s} , after the system has reached its stationary state. IV Surface deformation at slow shear IV.1 Packing density characteristics Figure 2 shows snapshots of DEM simulations of a linear shear cell