MIMO-AFDM Outperforms MIMO-OFDM in the Face of Hardware Impairments

Zeping Sui, Member, IEEE, Zilong Liu, Senior Member, IEEE, Leila Musavian, Senior Member, IEEE, Yong Liang Guan, Senior Member, IEEE, Lie-Liang Yang, Fellow, IEEE, Lajos Hanzo, Life Fellow, IEEE · 2026

Read MIMO-AFDM Outperforms MIMO-OFDM in the Face of Hardware Impairments by Zeping Sui, Member, IEEE, Zilong Liu, Senior Member, IEEE, Leila Musavian, Senior Member, IEEE, Yong Liang Guan, Senior Member, IEEE, Lie-Liang Yang, Fellow, IEEE, Lajos Hanzo, Life Fellow, IEEE (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-00502.txt.

Introduction

Zeping Sui and five co-authors compare two ways to pack wireless signals in a 2026 study. Both ways use many antennas at the sending and receiving ends. One way, called OFDM, is the standard in much of today's wireless gear. The newer way, called AFDM, uses chirp signals, whose tone sweeps up or down. Real gear is flawed, and the team ask how each way copes.

The flaws include noise in a signal's phase and shifts in its base tone. They also include bent signals from cheap parts and poor guesses of the channel. For small setups the team work out a tight bound on the error rate. For large setups they give a close formula for a simpler receiver. AFDM keeps its full spread of signal paths despite the flaws. It also beats OFDM on error rate. That edge suits it to fast, mobile links.

Catalog record

CREATORZeping Sui, Member, IEEE, Zilong Liu, Senior Member, IEEE, Leila Musavian, Senior Member, IEEE, Yong Liang Guan, Senior Member, IEEE, Lie-Liang Yang, Fellow, IEEE, Lajos Hanzo, Life Fellow, IEEE
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE69 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-00502

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

MIMO-AFDM Outperforms MIMO-OFDM in the Face of Hardware Impairments Zeping Sui, Member, IEEE, Zilong Liu, Senior Member, IEEE, Leila Musavian, Senior Member, IEEE, Yong Liang Guan, Senior Member, IEEE, Lie-Liang Yang, Fellow, IEEE, Lajos Hanzo, Life Fellow, IEEE Abstract The impact of both multiplicative and additive hardware impairments (HWIs) on multiple-input multiple-output affine frequency division multiplexing (MIMO-AFDM) systems is investigated. For small-scale MIMO-AFDM systems, a tight bit error rate (BER) upper bound associated with the maximum likelihood (ML) detector is derived. By contrast, for large-scale systems, a closed-form BER approximation associated with the linear minimum mean squared error (LMMSE) detector is presented, including realistic imperfect channel estimation scenarios. Our first key observation is that the full diversity order of a hardware-impaired AFDM system remains unaffected, which is a unique advantage. Furthermore, our analysis shows that 1) the BER results derived accurately predict the simulated ML performance in moderate-to-high signal-to-noise ratios (SNRs), while the theoretical BER curve of the LMMSE detector closely matches that of the Monte-Carlo based one. 2) MIMO-AFDM is more resilient to multiplicative distortions, such as phase noise and carrier frequency offset, compared to its orthogonal frequency division multiplexing (OFDM) counterparts. This is attributed to its inherent chirp signal characteristics; 3) MIMO-AFDM consistently achieves superior BER performance compared to conventional MIMO-OFDM systems under the same additive HWI conditions, as well as different velocity values. The latter is because MIMO-AFDM is also resilient to the additional inter-carrier interference (ICI) imposed by the nonlinear distortions of additive HWIs. In a nutshell, compared to OFDM, AFDM demonstrates stronger ICI resilience and achieves the maximum full diversity attainable gain even under HWIs, thanks to its intrinsic chirp signalling structure as well as to the beneficial spreading effect of the discrete affine Fourier transform. I Introduction I-A Background Next-generation (NG) wireless networks are expected to support efficient and reliable communications in the high-mobility environments of high-speed trains, vehicle-to-everything networks, flying drones, low-earth-orbit satellites, etc. However, high velocity typically results in severe inter-carrier interference (ICI) and inter-symbol interference (ISI) [ 32 ] . Hence, classic orthogonal frequency division multiplexing (OFDM) suffers from orthogonality erosion owing to high Doppler [ 28 ] . To address this challenge, both multicarrier orthogonal time frequency space (MC-OTFS) [ 10 , 29 , 30 ] and Zak-OTFS [ 21 , 22 ] transceivers have been proposed. By sending the data symbols in the delay-Doppler domain, one is able to exploit the sparse and quasi-static wireless channels of OTFS systems. This leads to high Doppler resilience. However, as a two-dimensional (2D) modulation scheme, the transceiver complexity of OTFS is excessive, and it may require a significant change to the transceiver design compared to the family of OFDM systems. More recently, affine frequency division multiplexing (AFDM) was introduced in [ 3 ] , whereby orthogonal chirp subcarriers are employed, and the information symbols are multiplexed in the discrete affine Fourier transform (DAFT)-domain. As a matter of fact, DAFT can be regarded as a generalization of both the discrete Fourier transform (DFT) and the discrete Fresnel Transform (DFnT) associated with the additional parameters c_{1} and c_{2} , which are associated with the chirp rate and the initial phase, respectively. As a result, AFDM is highly flexible, subsumes both OFDM and orthogonal chirp division multiplexing (OCDM) as a pair of special cases, and it can be efficiently implemented through minimal modification of the OFDM architecture [ 3 ] . Therefore, AFDM is recognized as a promising backward-compatible waveform that permits seamless integration into the existing OFDM-based wireless infrastructure. 1 1 1 Let M and N denote the numbers of delay and Doppler bins in Zak-OTFS. Under the condition that a constant amplitude zero autocorrelation (CAZAC) basis is exploited to realize Zak-OTFS and the AFDM chirp parameters satisfy c_{1}MN,c_{2}MN\in\mathbb{Z} , Zak-OTFS and AFDM can be observed as unitarily equivalent waveforms [ 21 , 22 ] . By appropriately tuning c_{1} and c_{2} based on the specific delay and Doppler profiles encountered, the non-zero elements of the effective DAFT-domain channel matrix associated with different paths can be well separated, thus yielding full diversity. I-B Related Works I-B 1 AFDM Although it was proposed as recently as 2023, AFDM has already undergone investigations from diverse perspectives, including its channel estimation [ 36 , 2 ] , data detection [ 14 , 19 ] , and AFDM-enabled system design [ 18 , 26 , 33 , 34 ] . Specifically, a low-complexity channel estimation method was proposed in [ 36 ] by reconstructing the diagonal structure of the DAFT-domain channel matrix. Li et al. [ 14 ] introduced low-complexity iterative linear minimum mean squared error (LMMSE)-based equalizers, and proposed chirp parameter selection strategies for enhanced bit error rate (BER) performance. In [ 19 ] , a unified variational inference-based model was established, under which belief propagation and expectation propagation-based detection schemes were derived. In [ 18 ] , AFDM was combined with sparse code multiple access systems for supporting massive connectivity in high-mobility channels. Generalized spatial modulation aided AFDM systems were studied in [ 26 ] , where extra information bits are mapped onto the indices of active transmit antennas. Very recently, upon introducing a bandwidth control factor for adjusting the subcarrier spacing, non-orthogonal AFDM was proposed in [ 33 ] for achieving improved spectrum efficiency (SE). In [ 34 ] , the error performance analysis and low-complexity LMMSE detector design were carried out for zero-padding-aided AFDM systems. I-B 2 Hardware Imperfections It is noted that the aforementioned AFDM studies were conducted under the assumption of either perfect hardware or perfect channel state information (CSI). In practical communication systems, severe performance loss may be encountered due to non-ideal hardware and/or imperfect CSI [ 27 , 4 ] . Some of the grave hardware impairments (HWIs), include oscillator phase noise (PN) [ 27 ] , carrier frequency offset (CFO) [ 16 ] , quantization distortions of low-resolution digital-to-analog converters (DACs) [ 20 ] , in-phase and quadrature imbalance (IQI) [ 13 ] , nonlinear power amplifier nonlinearity (NPA) [ 24 ] , and direct current offset (DCO) [ 35 ] . Physically, oscillator PN arises from thermal noise, flicker noise, and local oscillator (LO) imperfections, leading to random phase fluctuations that may destroy subcarrier orthogonality. CFO arises in realistic oscillators, which is caused by frequency mismatches between the transmit and receive LOs or by Doppler shifts, leading to a time-linear phase rotation that further impairs the received waveform. As these front-end distortions accumulate, DAC limitations become another contributing factor. Specifically, DAC power consumption follows the relationship of P_{\text{DAC}}\propto f_{s}\times 2^{b} , where b represents the quantizer resolution and f_{s} denotes the sampling rate [ 7 ] , making the design of high-resolution DACs challenging for high-throughput yet energy-efficient systems. When low-resolution DACs are employed, their coarse quantization introduces nonlinear distortions that further reduce the effective signal-to-noise ratio (SNR). Furthermore, from the mixer perspective, IQI induces additional distortions, such as mirror interference. This is due to amplitude and phase mismatches between the in-phase and quadrature branches, thereby deforming the received signal constellation [ 1 ] . Furthermore, the above distortions are compounded when the power amplifier (PA) input signal enters the nonlinear region, where it imposes additional signal deformation

Read the complete text