Edge emission from 265 nm UV-C LEDs grown by MBE on bulk AlN
Shivali Agrawal, Hsin-Wei S. Huang, Debaditya Bhattacharya, Madhav Ramesh, Krzesimir Szkudlarek, Henryk Turski, Vladimir Protasenko, Huili Grace Xing, Debdeep Jena · 2025
Read Edge emission from 265 nm UV-C LEDs grown by MBE on bulk AlN by Shivali Agrawal, Hsin-Wei S. Huang, Debaditya Bhattacharya, Madhav Ramesh, Krzesimir Szkudlarek, Henryk Turski, Vladimir Protasenko, Huili Grace Xing, Debdeep Jena (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-23896.txt.
Introduction
Shivali Agrawal and eight co-authors demonstrate ultraviolet LEDs that emit from their cleaved edge rather than their top surface. The devices, grown by molecular beam epitaxy on bulk aluminum nitride substrates, emit deep-ultraviolet light at two hundred sixty-five nanometers, a wavelength used for disinfection. Their layered structure mimics a laser diode, with a high-index waveguide core between cladding layers confining the light for edge emission at two hundred seventy nanometers by design.
The LEDs sustained very high current densities, showed five orders of magnitude between on and off states, and kept differential resistance low. Cleaving along a crystal plane exposed the edge, from which the team collected photons at the energy of the aluminum gallium nitride active region's bandgap. Analyzing where power is wasted, they identify the n-contact resistance as the largest contributor to series resistance in this device generation.
Catalog record
| CREATOR | Shivali Agrawal, Hsin-Wei S. Huang, Debaditya Bhattacharya, Madhav Ramesh, Krzesimir Szkudlarek, Henryk Turski, Vladimir Protasenko, Huili Grace Xing, Debdeep Jena |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 19 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-23896
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Edge emission from 265 nm UV-C LEDs grown by MBE on bulk AlN Preprint: AIP/123-QED Shivali Agrawal, Hsin-Wei S. Huang, Debaditya Bhattacharya, Madhav Ramesh, Krzesimir Szkudlarek, Henryk Turski, Vladimir Protasenko, Huili Grace Xing, Debdeep Jena Abstract UV-C LEDs pseudomorphically grown by MBE on bulk AlN substrates emitting at 265 nm are demonstrated. High current density up to 800 A/cm 2 , 5 orders of on/off ratio, and low differential on-resistance of 2.6 m Ω ⋅ \Omega\cdot cm 2 at the highest current density is achieved. The LED heterostructure has a high refractive index waveguide core surrounded by n- and p-cladding layers similar to a laser diode designed for mode confinement at 270 nm to facilitate edge emission and collection of photons. Edge-emitting devices are made by cleaving the fabricated LEDs along the m m -plane of the wurtzite crystal. Electrical injection results in emission of high energy 4.7 eV photons that are collected from the cleaved edge of the LEDs corresponding to the optical bandgap of the AlGaN active region. The contribution of power dissipation across the n- and p-regions of the diode is discussed. The n-contact resistance to n-AlGaN is identified as the largest contributor to the series resistance of the LED in the present generation of devices. High Al composition AlGaN-based UV-C (200 nm <\lambda_{\text{emission}}< 280 nm) light emitting diodes (LEDs) and laser diodes (LDs) on bulk AlN substrates are attractive for the development of deep ultraviolet light sources. These diodes have applications in sterilization, disinfection, lithography, and machining 10 . However these LEDs currently face challenges with their low external quantum efficiency, short lifetimes and rapid degradation at high injection 10 ; 23 . Investigation of these structures using different growth techniques can provide valuable insights into solving the current challenges. Metal-organic chemical vapor deposition (MOCVD) and molecular beam epitaxy (MBE) remain the most common growth techniques for the development of these diodes. Recently reported UV-C laser diodes grown by MOCVD on bulk AlN substrates have shown impressive performance 22 but are still plagued by short lifetimes 23 . While MOCVD is a scalable and commercially relevant growth technique, MBE offers ultra-high vacuum environment and hydrogen-free growth with ultrapure elemental sources which result in films with low C, H, Si, and O impurities as seen by time-of-flight secondary ion mass spectrometry (SIMS) measurements 6 . Additionally, lower growth temperatures in MBE result in reduced passivating defects that tend to form in high temperature epitaxy 5 . The crystal quality of the underlying AlN is important for device performance 11 . AlGaN films grown on bulk AlN substrates with low threading dislocation density (TDD) increase the internal quantum efficiency (IQE), carrier injection efficiency (CIE), and lifetime of devices 21 ; 2 ; 17 ; 16 . An earlier study has demonstrated the first MBE grown optically-pumped 280 nm AlGaN-based laser on a bulk AlN substrate 20 , highlighting the optical quality of AlGaN thin films grown by MBE. We also recently demonstrated the first MBE grown high Al content AlGaN p-n junction diodes appropriate for electrical injection on bulk AlN substrates 1 . In this study, we demonstrate and characterize electrically injected edge emitting DUV LEDs enabled by MBE grown heterostructures on bulk AlN substrates. Figure 1: (a) Heterostructure of the LED used in this study. (b) Measured and simulated symmetric 2 \theta - \omega X-ray diffraction scans across the (002) planes. (c) Reciprocal space map across the asymmetric ( \bar{1} 05) diffractions. (d) 20 \times 20 µm 2 AFM scan on the surface of the LED. Figure 2: (a) Secondary ion mass spectrometry (SIMS) of the LED epilayers. (b) Device schematic of the fabricated LED structure. (c) SEM image of 200 µm cavity length devices. (d) Energy band diagram and radiative recombination rate for the LED at 5.5 V forward bias. As the core of the LED is a pn junction, there is a need for electron and hole injection layers. For hole injection in ultrawide-bandgap (UWBG) AlGaN, successful use of dopant-free distributed polarization doping (DPD) in high Al content AlGaN pn diodes has been realized in previous studies by both MBE and MOCVD 1 ; 15 ; 12 . As shown in Fig. 1 (a), for electron injection we design a heterostructure with a heavily silicon doped n + -AlGaN region. Combining the polarization and impurity doped layers for p- and n- regions, respectively, we demonstrate a step towards developing a UV-C laser. We implement a separate confinement heterostructure (SCH) diode with an undoped waveguide layer to confine photons, and a single quantum well to confine electron and hole carriers for recombination. The asymmetric waveguide structure is optimized to have the highest optical mode confinement factor \Gamma of \sim 6\% at 270 nm. We fabricate Fabry-Pérot cavities with cleaved mirror facets. The emitted photons are waveguided in the high refractive index cladding layer and collected from the edge of the cavity. The LED heterostructure shown in Fig. 1 (a) was grown by nitrogen plasma-assisted MBE on a single crystal bulk AlN substrate. The targeted AlGaN epilayers on the metal polar face of the substrate along the [0001] crystal direction are: a 500 nm AlN buffer layer, 400 nm n + -Al 0.76 Ga 0.24 N with Si donor doping, a 9 nm single quantum well (SQW) sandwiched in a 120 nm asymmetric Al 0.66 Ga 0.34 N waveguide layer (50 nm on the n-side and 70 nm on the p-side), a 300 nm unintentionally doped (UID) AlGaN layer linearly graded from AlN to Al 0.65 Ga 0.35 N along the growth direction resulting in distributed polarization doping creating an effective \rho_{\pi}\sim 6\times 10^{17} cm -3 mobile hole density 1 , and a Mg doped contact layer consisting of 10 nm p + GaN and 6 nm p + In 0.05 Ga 0.95 N. The targeted Al mole fraction was \sim 54\% in the quantum well for the desired 270 nm wavelength. The symmetric (002) X-ray diffraction scan is shown in Fig. 1 (b) along with the theoretical diffraction pattern from a dynamical diffraction model. The extracted AlGaN and InGaN compositions are close to the targeted values. The clearly resolved interference fringes from the thin p-contact layer suggest sharp interfaces throughout the structure and are used to determine the p-contact layer thickness. The asymmetric reciprocal space map of the ( \bar{1}05 ) X-ray diffraction scan shown in Fig. 1 (c) suggests that all the AlGaN layers are strained to the AlN substrate as desired. Fig. 1 (d) shows the atomic force microscopy (AFM) image of the top p-InGaN surface after growth, exhibiting a smooth surface with sub-nanometer surface roughness over 20 \times 20 µm 2 scan area. Figure 3: (a) TLM IVs of the n-contacts. The resistance is calculated at each current value using R=V/I as shown in the figure. (b) TLM IVs of the p-contacts. (c) Specific contact resistivity and sheet resistance of the n- and p-contacts. (d) Linear (inset) and logarithmic diode IV characteristics and specific on resistance ( R_{\text{on}} ) at room temperature. SIMS depth profiles performed at EAG laboratories for Al, Ga, and impurity atoms C, H, Si, and O results are plotted in Fig. 2 (a). The Al and Ga metal mole