Hydrogen localization under thermal gradients in hydride forming metals

Karl A. Forsberg, A. R. Massih · 2025

Read Hydrogen localization under thermal gradients in hydride forming metals by Karl A. Forsberg, A. R. Massih (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-23869.txt.

Introduction

K. A. Forsberg and A. R. Massih model where hydrogen hides inside metals that soak it up. Zirconium, titanium, hafnium, and their alloys form hydrides, and when a temperature gradient crosses such a metal, hydrogen migrates and precipitates unevenly, concentrating in colder regions through the Soret effect. That shift matters for reactor fuel cladding, which steadily absorbs hydrogen during service.

Their computer method works in two dimensions: a steady heat flux fixes the temperature field, hydrogen mass flux under the gradient gives the distribution in solid solution. A solubility relation of van 't Hoff type decides where hydride settles out. Because the mixing enthalpy fluctuates thermally, they treat it as a random variable using Einstein-Boltzmann fluctuation theory. Applied to the cladding alloy Zircaloy-4 with ongoing hydrogen pickup included, the predicted profiles compare well with published lab observations. The aim is cladding that lasts longer in service.

Catalog record

CREATORKarl A. Forsberg, A. R. Massih
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE58 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-23869

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Hydrogen localization under thermal gradients in hydride forming metals Karl A. Forsberg, A. R. Massih Abstract Migration of hydrogen and hydride formation under thermal gradient leads to hydrogen redistribution in certain metals. These metals include zirconium, titanium, hafnium and their alloys with tendency to form hydrides. A computational method for hydrogen localization in such metals are presented. The method utilizes the heat flux in a steady state to compute temperature distribution (as input), and hydrogen mass flux under temperature gradient to determine hydrogen distribution both in solid solution and in the hydride phase in a two-dimensional setting. Hydrogen precipitation to hydride is determined by a solid solubility relation with an exponential function of the enthalpy of mixing per a van ’t Hoff relation. The enthalpy of mixing is treated here as a stochastic variable subject to thermodynamic fluctuations. Henceforth, the Einstein-Boltzmann fluctuation theory is adapted to calculate the spatial distribution of hydrogen in solid solution and in the hydride phase. Hydrogen concentration gets localized in the colder region of the body (Soret effect). We apply the model to the case of a zirconium alloy, Zircaloy-4, which is a material for fuel cladding utilized in pressurized water reactors. Cladding continuously picks up hydrogen due to Zr oxidation during reactor service, which we take into account. Our calculated results, hydrogen concentration profiles are comparable to experimental observations reported in the literature. 1 Introduction Hydrogen absorption by group 4B metals, namely, titanium, zirconium, hafnium, can lead to formation of binary metal hydrides. The presence of hydrides in structural components that are made of these metals and their alloys, widely used in aerospace and nuclear power industries, may be amenable to the loss of integrity since hydrides are brittle [ 1 , 2 , 3 , 4 ] . The inflow of hydrogen in these metals/alloys are driven by several forces, namely gradients in hydrogen concentration, temperature and applied stress. More specifically, hydrogen can precipitate into hydrides when reaching its so called terminal solid solubility or TSS [ 5 , 6 , 7 ] . Moreover, there are two TSSs one associated with precipitation (TSSP) and another with dissolution (TSSD) with an involved hysteresis [ 8 ] . Most of the works reported in the literature on the topic comprise researches that were carried out on zirconium alloys, which are widely used in the core of light water reactors (LWRs), primarily as materials for fuel rod cladding that are subject to temperature, concentration and stress gradients. Concerning hydrogen transport behavior in titanium alloys, we can only mention Ref. [ 9 ] . Let us first give a synopsis of the pertinent literature. Modeling hydrogen redistribution in Zr-alloys under temperature gradient is a venerable story. The early studies on the subject include works of Markowitz [ 10 ] , Sawatzky and Vogt [ 11 , 12 ] , Marino [ 13 , 14 ] , Maki and Sato [ 15 ] , Bilsby [ 16 ] , Byrne et al. [ 17 ] , and Takagi et al. [ 18 , 19 ] . Marino in Ref. [ 14 ] provided a method for the calculation of hydrogen distribution in Zr-alloy under a general 2-dimensional (spatial) setting. He introduced a sink term in the diffusion equation for hydrogen in solid solution, i.e., treating hydride platelets as sinks that remove hydrogen from the solution at a rate governed by hydrogen supersaturation. The rate of precipitation was assumed to be proportional to the difference between concentration of supersaturated hydrogen in solid solution and that in phase equilibrium taken as the terminal solid solubility limit for precipitation. The key parameter in Marino’s model is the efficacy of the precipitation rate, which was designated by the symbol \alpha^{2} [ 20 ] . It has the unit of inverse-time, which needs to be determined empirically. Marino’s approach was used in a subsequent study by Bilsby [ 16 ] to analyze the impact of \alpha^{2} on hydrogen and hydride distribution in a thermal gradient in Zircaloy cladding tube under reactor service conditions. Later, \alpha^{2} was measured by Kammenzind et al. [ 21 ] as a function of temperature (between 561 and 633 K) and then by curve fitting the data (7 data points) obtained an Arrhenius relationship for \alpha . In an ensuing study, Kammenzind et al. [ 22 ] inter alia measured hydrogen redistribution in hydrogenated Zircaloy-4 sheet samples under stress-free and isothermal conditions subject to a concentration gradient. They applied Marino’s model to describe the measured data. However, their comparison between measured vs. calculated values was not promising. Later on, with a different modeling approach [ 23 ] , this experiment was reappraised and found a fair agreement with the data. More recent numerical approaches to the issue of hydrogen redistribution subject to temperature and stress gradients in Zr-alloys comprise the works [ 24 , 25 , 26 , 27 , 28 ] . In [ 24 ] the authors adapted Marino’s precipitation kinetics approach [ 20 , 14 ] , and implemented that in a 3-dimensional finite element method fuel performance code to compute hydrogen distribution in Zircaloy fuel cladding. They simulated, among other things, an accumulation of zirconium hydrides, under a radial temperature gradient, close to the colder outer edge of Zircaloy cladding tube, which is observed in highly exposed fuel rods in light water reactors (LWRs). Veshchunov et al. [ 26 ] used an alternate model of hydrogen redistribution in Zr-alloy claddings during waterside corrosion in a temperature gradient. This model treats the case of heavily precipitated hydrides which is observed in high exposure fuel cladding tubes of LWRs. Actually, they used a well-known approach for the mass transfer through a two-phase region by an additional consideration to the hydrogen supersaturation in the matrix. The formation of the two-phase zone, i.e. hydride precipitates in the metal phase, was analysed on the basis of the Mullins-Sekerka kinetic theory of a plane front instability. Aiyeru et al. [ 27 ] implemented a hydride precipitation and dissolution model [ 25 ] , which accounts for the hysteresis in the phase transformation, in a commercial finite element code together with subroutines that couple the mass diffusion of hydrogen and heat transfer that lead to redistribution and hydride precipitation in gradients of stress and temperature. They validated the code against Sawatzky’s 1960 uniaxial temperature gradient experiment [ 11 ] and Kammenzind et al.’s [ 22 ] hydrogen concentration gradient experiment with satisfactory results. Similarly, Nantes et al. [ 28 ] used a finite element computer code, which includes the aforementioned hydride precipitation and dissolution model [ 24 , 25 ] to evaluate hydrogen localization in Zircaloy cladding subject to temperature gradients in LWR conditions. Their study includes hydrogen accumulation in the inter-pellet region of the cladding and the impact of missing pellet surface on hydrogen redistribution. We should also mention the long-ago work by Asher and Trowser (1970) [ 29 ] , who noted that the hydrogen terminal solid solubility should be described by a fluctuating line, because hydride is precipitated preferentially on certain sites and lattice planes. Our early modeling approach to this effect was attempted in [ 30 ] 1 1 1 At the time we were not aware

Read the complete text