Mesquite MoCap: Democratizing Real-Time Motion Capture with Affordable, Bodyworn IoT Sensors and WebXR SLAM
Poojan Vanani, Darsh Patel, Danyal Khorami, Siva Munaganuru, Pavan Reddy, Varun Reddy, Bhargav Raghunath, Ishrat Lallmamode, Romir Patel, Assegid Kidané, Tejaswi Gowda · 2025
Read Mesquite MoCap: Democratizing Real-Time Motion Capture with Affordable, Bodyworn IoT Sensors and WebXR SLAM by Poojan Vanani, Darsh Patel, Danyal Khorami, Siva Munaganuru, Pavan Reddy, Varun Reddy, Bhargav Raghunath, Ishrat Lallmamode, Romir Patel, Assegid Kidané, Tejaswi Gowda (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-22690.txt.
Introduction
Poojan Vanani and ten co-authors present Mesquite, an open-source motion capture system meant to escape the expensive laboratory. Optical mocap is costly and complex. Their alternative is a body-worn network of fifteen inertial sensor nodes. The nodes stream orientation data over a low-power wireless link to a USB dongle. A hip-worn Android phone handles position tracking. Everything runs in a browser, using WebGL rendering, WebXR for simultaneous localization, and web standards for device communication.
Against a commercial optical system, Mesquite's mean joint-angle error was two to five degrees, at roughly five percent of the cost. It sustains thirty frames per second with latency under fifteen milliseconds indoors. Hardware designs, firmware, and software are released openly for entertainment, healthcare, and virtual reality uses.
Catalog record
| CREATOR | Poojan Vanani, Darsh Patel, Danyal Khorami, Siva Munaganuru, Pavan Reddy, Varun Reddy, Bhargav Raghunath, Ishrat Lallmamode, Romir Patel, Assegid Kidané, Tejaswi Gowda |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-22690
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mesquite MoCap: Democratizing Real-Time Motion Capture with Affordable, Bodyworn IoT Sensors and WebXR SLAM Poojan Vanani, Darsh Patel, Danyal Khorami, Siva Munaganuru, Pavan Reddy, Varun Reddy, Bhargav Raghunath, Ishrat Lallmamode, Romir Patel, Assegid Kidané, Tejaswi Gowda Abstract Motion capture remains costly and complex to deploy, limiting use outside specialized laboratories. We present Mesquite, an open-source, low-cost inertial motion-capture system that combines a body-worn network of 15 IMU sensor nodes with a hip-worn Android smartphone for position tracking. A low-power wireless link streams quaternion orientations to a central USB dongle and a browser-based application for real-time visualization and recording. Built on modern web technologies—WebGL for rendering, WebXR for SLAM, WebSerial and WebSockets for device and network I/O, and Progressive Web Apps for packaging—the system runs cross-platform entirely in the browser. In benchmarks against a commercial optical system, Mesquite achieves mean joint-angle error of 2–5 degrees while operating at approximately 5% of the cost. The system sustains 30 frames per second with end-to-end latency under 15 ms and a packet delivery rate of at least 99.7% in standard indoor environments. By leveraging IoT principles, edge processing, and a web-native stack, Mesquite lowers the barrier to motion capture for applications in entertainment, biomechanics, healthcare monitoring, human–computer interaction, and virtual reality. We release hardware designs, firmware, and software under an open-source license (GNU GPL). I Introduction Motion capture (MoCap) technology enables the recording, replay, and analysis of human movement, with applications spanning biomechanical research, clinical rehabilitation, animation, and interactive entertainment [ 17 ] . Traditional optical motion capture systems provide high-precision data but require dedicated studio spaces, optimal lighting conditions, and investments often exceeding $100,000 [ 21 ] . While IMU-based commercial alternatives offer portability, they remain costly due to proprietary hardware and software ecosystems [ 33 ] . These constraints create significant accessibility barriers for many potential users, including small research laboratories, educational institutions, healthcare providers, and independent developers. Users seeking affordable alternatives often sacrifice customization and specificity, forcing them to compromise on both affordability and functionality. The limitations of existing motion capture systems stem from their reliance on expensive proprietary hardware and software, which restricts adaptability [ 7 ] . Furthermore, the complexity of setup, calibration, and the need for dedicated spaces can deter users from fully utilizing the technology. As a result, many researchers and practitioners are left without effective tools for capturing and analyzing human movement in real-world environments. The Internet of Things (IoT) paradigm [ 1 ] , along with Body Worn Sensor Networks (BWSNs) [ 28 ] , offers a promising approach to address these limitations through distributed sensing, edge computing, and wireless data aggregation. By leveraging advances in microelectromechanical systems (MEMS) [ 10 ] , low-power wireless microcontrollers, and emerging web standards (such as WebSerial [ 13 ] , WebSockets [ 15 ] , WebXR [ 42 ] , WebGL [ 16 ] , and Progressive Web Apps [ 12 ] ), it becomes possible to create affordable motion capture systems without compromising performance. This paper presents Mesquite, an IoT-based motion capture system that utilizes a wireless network of inertial sensors and a consumer smartphone to track human movement. The system implements an independent network architecture, enabling real-time data transmission, browser-based visualization, and a record-replay pipeline. Our contributions include: a low-cost (under $1000), open-source wireless sensor network design for human motion capture using commodity hardware; a robust network design optimized for real-time sensor data transmission with minimal latency; real-time kinematic reconstruction; comprehensive performance evaluation comparing accuracy with commercial systems; and demonstration of data integration across multiple domain toolchains. The remainder of this paper is organized as follows: Section II reviews related work in IMU-based motion capture, IoT sensor networks, and wearable position and orientation estimation. Section III details the system architecture, covering hardware, network design, software components, data processing, and the record-and-reuse pipeline. Section IV presents performance evaluation and validation results. Section V discusses applications, followed by future directions in Section VI and conclusions in Section VII. II Background and Related Work II-A IMU-Based Motion Capture Inertial Measurement Unit (IMU)-based motion capture has gained significant attention as a flexible and cost-effective alternative to traditional optical systems, which typically require complex setups and controlled environments. Unlike optical systems which rely on cameras and markers, IMU-based systems offer greater mobility, reduced infrastructure requirements, and the potential for use in unconstrained environments [ 9 ] . Commercial solutions like Xsens MVN [ 34 ] , Perception Neuron [ 26 ] , and Rokoko Smartsuit Pro [ 35 ] have demonstrated the viability of these approaches for full-body motion capture in entertainment, sports, and rehabilitation contexts. However, their high costs remain a barrier to broader adoption, particularly in educational, hobbyist, or low-resource research settings. To address this, several research efforts have explored low-cost alternatives. Smartphone-based systems [ 14 , 6 ] and custom-built platforms using wireless microcontrollers [ 38 , 19 ] aim to lower the cost of entry but often trade off extensibility, ease and mature toolchains that integrate with existing software. Mesquite addresses these issues by exporting both raw data and the industry standard Biovision Hierarchy(BVH) format [ 22 ] which allows for easy integration with existing animation and motion capture software. Recent advancements in MEMS (Micro-Electro-Mechanical Systems) technology have improved the sensitivity, size, and cost of consumer-grade IMUs, making them suitable for precise motion tracking when combined with effective sensor fusion algorithms [ 20 , 10 ] . These algorithms enable real-time orientation estimation by fusing data from accelerometers, gyroscopes, and magnetometers. These operations are increasingly performed on the sensor node itself, reducing the need for high-bandwidth wireless communication by using on-board motion processing [ 34 ] . Despite these improvements, existing low-cost solutions continue to face critical limitations. These include drift accumulation over time due to integration errors, restricted wireless communication architectures that hinder multi-sensor synchronization, and a general lack of robust, openly available software and hardware platforms that can be customized for application-specific needs [ 9 , 30 ] . Moreover, few systems offer comprehensive real-time visualization or support real time streaming out-of-the-box. The core problem of IMU based mocap is calculating the position and orientation of the user in 3D space. While IMUs can provide accurate local motion data, they often struggle with drift and cumulative errors over time, making it difficult to maintain an accurate global reference frame. This is particularly challenging in dynamic environments where the user may move through complex trajectories or interact with physical objects. To solve this Mesquite can use any of the many implementations of Simultaneous Localization and Mapping (SLAM) techniques, which use computer vision to establish a global reference frame based on the user’s environment. This approach allows for accurate tracking of the user’s position and orientation in 3D space, even in dynamic environments. The system uses WebXR World Mapping [ 42 , 24 ] to establish an absolute spatial frame, which is then used to track the user’s hip position. This approach allows for accurate tracking of the user’s position in 3D space, even in dynamic environments, while the rest of the body is tracked using 15 body-worn IMUs for orientation, and joint positions are estimated through forward kinematics. II-B IoT Sensor Networks for Human Motion Analysis