Topology-Preserving Scalar Field Optimization for Boundary-Conforming Spiral Toolpaths on Multiply Connected Freeform Surfaces
Changqing Shen, Bingzhou Xu, Bosong Qi, Xiaojian Zhang, Han Ding · 2025
Read Topology-Preserving Scalar Field Optimization for Boundary-Conforming Spiral Toolpaths on Multiply Connected Freeform Surfaces by Changqing Shen, Bingzhou Xu, Bosong Qi, Xiaojian Zhang, Han Ding (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-22502.txt.
Introduction
Shen Changqing and five co-authors generate spiral milling paths for complicated industrial parts whose surfaces have multiple holes and boundaries. Standard toolpath generation on such multiply connected freeform surfaces produces breaks, sharp turns, uneven scallop heights, and missed boundary coverage. Their method tunes a scalar field whose level curves become the toolpaths, aiming for continuous, boundary-hugging, non-crossing spirals from the start.
They first build a feasible, flaw-free field with boundary-conforming level sets through conformal slit mapping. The tuning is then recast as topology-preserving mesh deformation with boundary-synchronous updates, turning path requirements into mesh constraints that hold throughout. In milling tests, the approach improved milling efficiency by about fourteen percent and scallop-height evenness by about six percent over a leading slit-mapping method, while cutting impact-induced vibration.
Catalog record
| CREATOR | Changqing Shen, Bingzhou Xu, Bosong Qi, Xiaojian Zhang, Han Ding |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 50 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-22502
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Topology-Preserving Scalar Field Optimization for Boundary-Conforming Spiral Toolpaths on Multiply Connected Freeform Surfaces Changqing Shen, Bingzhou Xu, Bosong Qi, Xiaojian Zhang, Han Ding Abstract Multiply connected freeform surface features are widely encountered in industrial components, where toolpath generation often suffers from discontinuities, sharp turns, non-uniform scallop heights, and incomplete boundary coverage. This paper proposes a scalar-field variational optimization method for milling that produces continuous, boundary-conforming, and non-self-intersecting toolpaths with smoother transitions, more uniform spacing, and reduced redundant path length. A feasible singularity-free initial scalar field with boundary-conforming iso-level sets is first constructed via conformal slit mapping. The optimization is then reformulated as a topology-preserving mesh deformation process governed by boundary-synchronous updates, whereby the continuity, boundary-conformity, and non-self-intersection requirements of the toolpath are converted into mesh-shape constraints maintained throughout the iterative optimization. As a result, the proposed method achieves globally optimized path spacing and improved scallop-height uniformity while preserving trajectory smoothness. Milling experiments show that, compared with a state-of-the-art conformal slit mapping-based method, the proposed approach improves machining efficiency by 14.24%, enhances scallop-height uniformity by 5.70%, and reduces milling impact-induced vibrations by over 10%. The proposed strategy provides an effective solution for high-performance machining of complex multiply connected freeform components. keywords Spiral tool trajectory planning ,scalar-field optimization ,conformal slit mapping ,freeform surface toolpath planning † † credit: Conceptualization, Methodology, Software, Validation, Formal analysis, Investigation, Visualization, Writing - Original Draft † † credit: Investigation, Validation, Writing - Review & Editing † † credit: Investigation, Validation, Writing - Review & Editing † † corresponding: Corresponding author † † credit: Conceptualization, Supervision, Project administration, Funding acquisition, Resources, Writing - Review & Editing † † credit: Supervision, Project administration, Funding acquisition, Resources 1 Introduction 1.1 Problem Description In modern manufacturing, component geometries have become increasingly complex, particularly in the automotive and aerospace sectors Mali et al. (2021) ; Marin et al. (2025) ; Pereira et al. (2025) . Machining quality and efficiency depend strongly on the quality of toolpath planning. A representative example is an automotive headlamp mold (Figure 1 ), whose machined surface contains multiple protrusions. These geometric features obstruct continuous toolpath coverage, causing conventional planning methods to generate five retractions and numerous sharp turns. These path characteristics tend to induce surface defects and reduce machining efficiency. Studies have examined the adverse machining consequences induced by unfavorable toolpath characteristics. For instance, intermittent tool–workpiece separation and re-engagement can lead to fluctuations in material removal Yan et al. (2019) ; Yang et al. (2024) and burr formation Chen et al. (2021) ; frequent steering operations may trigger actuator deceleration Kim and Choi (2002) and intensified vibrations Wang et al. (2025) ; toolpaths that do not conform to surface boundaries tend to leave residual material Yang et al. (2023) ; and self-intersecting trajectories can distort the milling load and cause surface scratching on the machined workpiece Hajdu et al. (2025) . Figure 1: Toolpaths generated for freeform surface machining using commercial CAD/CAM software. To satisfy the requirements of advanced complex components for both high efficiency and high quality, toolpath planning should minimize path length, interruptions, sharp turns, and self-intersections while enhancing smoothness, scallop-height uniformity, and strict conformity to machining surface boundaries. However, these objectives are often mutually conflicting, which renders their simultaneous achievement within a unified global framework particularly challenging. 1.2 Related work Based on current knowledge, milling toolpath planning methods for multiply connected surfaces can be broadly classified into three categories: element decomposition Acar et al. (2003) ; Choi (2021) ; Ge et al. (2024) ; Held and de Lorenzo (2018) ; Lin et al. (2017) ; Sun et al. (2016) ; Wu et al. (2019) ; Xu et al. (2022) , boundary offsetting Lee (2003) ; Xu et al. (2019) ; Zhao et al. (2024) ; Zhuang et al. (2010) , and scalar/vector field optimization Bartoň et al. (2021) ; Dutta et al. (2023) ; Goes et al. (2016) ; Shen et al. (2024) ; Shen et al. (2025) ; Zou (2021) ; Zou et al. (2014) . In addition, several complete coverage trajectory planning methods have been proposed but are rarely adopted in milling applications because of excessive turning angles, incomplete coverage, and frequent self-intersections Ban et al. (2013) ; Song and Gupta (2018) ; therefore, they are not discussed in this paper. The first category decomposes complex surfaces into multiple simpler subregions that can be more easily parameterized and are typically assumed to be connected. For example, Acar et al. Acar et al. (2003) divided complex regions by identifying critical boundary points and sweep lines, allowing each subregion to be fully covered by sweep paths. Yu-Yao Lin et al. Lin et al. (2017) employed holomorphic quadratic differentials to decompose a genus-g surface into 3g-3 hole-free subregions, each filled with zigzag coverage paths. Other studies have introduced artificial cutting boundaries to transform multiply connected domains into single or multiple disk- or annulus-like subregions Sun et al. (2016) ; Abrahamsen (2019) , within which conformal mapping Choi (2021) or medial-axis-transform (MAT)-based methods Ge et al. (2024) ; Held and de Lorenzo (2018) were adopted to generate spiral or zigzag paths. However, for highly perforated surfaces, such decomposition is often nontrivial and can lead to excessive bridging or severe non-uniformity in path spacing. The second category is based on boundary offsetting. Lee et al. Lee (2003) proposed an equal-scallop-height offsetting method to generate spiral paths on hole-free surfaces. Xu et al. Xu et al. (2019) computed equal-scallop-height offsets on flattened surfaces using mapping stretch factors, achieving the improved smoothness compared with Lee’s method. Nevertheless, both approaches suffer from sharp turning angles and fragmented paths caused by self-intersections induced by trajectory offsetting. Zhao et al. Zhao et al. (2024) extracted sharp-turning regions from offset paths and filled them with zigzag patterns to improve the spacing uniformity, at the cost of increased turns and interruptions. Zhuang et al. Zhuang et al. (2010) formulated the offsetting process using the level-set evolution, which enabled the smoothness control, while on multiply connected surfaces, the level sets tend to fragment, necessitating additional path bridging. Regardless of whether decomposition- or offsetting-based strategies are adopted, existing methods frequently generate toolpaths with interruptions, sharp turning angles, and insufficient boundary conformity when holes and protrusions are present. These limitations inevitably degrade machining quality and efficiency, highlighting the need for new toolpath planning approaches capable of producing continuous, smooth, and fully boundary-conforming trajectories on complex multiply connected surfaces. Recently, scalar/vector field optimization methods Bartoň et al. (2021) ; Dutta et al. (2023) ; Goes et al. (2016) ; Shen et al. (2024) ; Shen et al. (2025) ; Zou (2021) ; Zou et al. (2014) have emerged as promising alternatives because they provide a global optimization framework that simultaneously accounts for path spacing uniformity, smoothness, and boundary conformity. Zou et al. Zou et al. (2014) and Zou Zou (2021) formulated toolpath planning on hole-free surfaces as a scalar-field functional optimization problem, in which multi-objective energy terms were used to optimize isoparametric trajectories. Their work showed that, with appropriate boundary conditions and nonvanishing-gradient constraints, boundary-aligned and globally coordinated trajectories could be generated from scalar-field iso-level sets. However, extending this framework to porous or multiply connected surfaces remains challenging, because simultaneously maintaining boundary conformity and a nonzero gradient sigularity