Nonlinear Anisotropy in Phase-Tuned Wide-Gap Halides
L. Landivar Scott, L. M. Vogl, C. Klenke, S. Puri, H. Nakamura · 2025
Read Nonlinear Anisotropy in Phase-Tuned Wide-Gap Halides by L. Landivar Scott, L. M. Vogl, C. Klenke, S. Puri, H. Nakamura (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-22409.txt.
Introduction
L. Landivar Scott and four co-authors measure how silver iodide films bend light nonlinearly, and how the answer depends on the crystal phase grown. Silver iodide's noncentrosymmetric lattice and direct band gap make it a useful nonlinear optical material. Films grown by physical vapor deposition can be steered into zincblende or wurtzite phases, arriving as triangular flakes or rod-shaped crystals respectively.
Using polarization-resolved second harmonic generation and two-photon light emission, the team found sixfold symmetric harmonic patterns from the flakes and twofold patterns from the rods, in both reading channels. Theory combining second- and third-order response strengths explains the shapes. After correcting for internal reflections and interference, they estimate the effective nonlinear coefficients for both phases, giving a careful method for thin films on substrates.
Catalog record
| CREATOR | L. Landivar Scott, L. M. Vogl, C. Klenke, S. Puri, H. Nakamura |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 23 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-22409
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Nonlinear Anisotropy in Phase-Tuned Wide-Gap Halides L. Landivar Scott, L. M. Vogl, C. Klenke, S. Puri, H. Nakamura Abstract Silver iodide (AgI) thin films offer a compelling platform for studying nonlinear optical phenomena due to their intrinsic noncentrosymmetric lattice and direct band gap. Here, we investigate the nonlinear optical properties of AgI thin films grown by physical vapor deposition that selectively produce zincblende ( γ \gamma -AgI) and wurtzite ( β \beta -AgI) phases. Using a combination of polarization-resolved second harmonic generation (SHG) and two-photon photoluminescence (2PPL) spectroscopy, we identify clear phase- and morphology-dependent anisotropic nonlinear responses. Triangular γ \gamma -AgI ( 111 ) (111) flakes exhibit sixfold SHG symmetry and isotropic 2PPL emission, while rod-shaped β \beta -AgI ( 101 ) (101) samples display twofold-symmetric patterns in both SHG and 2PPL, which are explained by polarization analysis using second- and third- order nonlinear susceptibilities. These findings establish AgI as a promising halide semiconductor platform for phase-selective nonlinear optics and quantum photonic applications. I Introduction Nonlinear optical effects in crystalline materials provide powerful means of probing symmetry, band structure, and light–matter interactions. In particular, second harmonic generation (SHG) and two-photon photoluminescence (2PPL) have become indispensable tools for studying noncentrosymmetric materials and their symmetry-dependent responses 2 . In two-dimensional (2D) materials such as transition-metal dichalcogenides (TMDs) and hexagonal boron nitride, interlayer stacking and rotational alignment can reversibly break or restore inversion symmetry, thereby modulating the nonlinear optical response 13 ; 12 ; 21 . Such stacking-dependent SHG effects demonstrate that structural symmetry control at the atomic scale provides a robust handle for engineering nonlinearities in low-dimensional systems. Beyond van der Waals semiconductors, halide compounds are emerging as a promising new class of nonlinear materials 20 ; 24 ; 22 . Their large polarizability, tunable electronic structure, and propensity to form noncentrosymmetric lattices give rise to strong \chi^{(2)} and \chi^{(3)} responses even in bulk phases. Lead halide perovskites and copper or silver halides have exhibited tunable second- and third-order nonlinearities due to structural phase transitions, excitonic resonances, and strain 6 ; 4 ; 1 ; 14 . However, our understanding of the correlation between crystalline phase and nonlinear response in simple binary halides has been underdeveloped. Silver iodide (AgI) is particularly intriguing because it exhibits polymorphism between zincblende ( \gamma -AgI) and wurtzite ( \beta -AgI) phases at ambient conditions 3 ; 17 ; 19 - both being direct-gap, noncentrosymmetric semiconductors 11 . This makes AgI a rare system for isolating phase-induced effects on nonlinear optical processes within the same chemical composition. In this Letter, we investigate phase-dependent nonlinear optical effects in silver iodide thin films synthesized by controlled physical vapor deposition. Using polarization-resolved SHG and two-photon photoluminescence spectroscopy, we reveal distinct anisotropic responses associated with the \gamma -AgI(111) and \beta -AgI(101) phases. The results demonstrate how crystallographic phase dictate nonlinear light–matter interactions in halide semiconductors, offering a pathway toward phase-engineered halide platforms for nanoscale optoelectronic and quantum photonic applications. II Growth and Structural Characterization Figure 1: Electron microscopy and spectroscopy characterization of two AgI morphologies prepared as FIB lift-out cross-section lamellae. Triangular platelet: (a) SEM plan-view image of triangular platelets, with a dashed yellow line indicating the cut location for cross-sectioning. (b) HAADF-STEM cross-section reveals a uniform AgI film of approximately 500 nm thickness on a Si substrate. (c) Bright-field optical image of the same sample confirms the characteristic triangular morphology. (d) STEM–EDS mapping shows a stoichiometric and compositionally uniform distribution of Ag (magenta) and I (green); O (blue), Si (red), and Pt (yellow) originate from the substrate and protective cap, respectively. (e) High-resolution STEM image along a zone axis reveals atomic lattice fringes consistent with the \gamma -AgI(111) stacking sequence with a zone axis [110]. Rod-like platelet: (f) Optical micrograph of an elongated nanorod grown at higher temperature. (g) SEM plan-view of a nanorod, with the yellow dashed line indicating the cross-section cut for TEM. (h) ADF-STEM cross-section shows a compact, rectangular shape with dense internal microstructure. (i) STEM–EDS elemental mapping confirms the rod is composed of Ag and I, with a stoichiometric distribution. Silver iodide (AgI) thin films were grown using physical vapor deposition (PVD) from commercially available, high-purity AgI powder. The source powder was placed at the center of the furnace, while silicon substrates with a 90 nm-thick SiO 2 layer were mounted on a separate alumina boat positioned downstream. After vacuum pumping for approximately five minutes, a gas mixture of 96 % argon (Ar) and 4 % H 2 was introduced in the reverse (substrate-to-powder) direction. Growth was carried out at 450 ∘ C for samples yielding predominantly triangular and hexagonal morphologies, and at 470 ∘ C for samples exhibiting rod-like structures. In all cases, the growth was quenched by sliding both powder and substrates away from the hot zone of the furnace. High-resolution scanning transmission electron microscopy (HRSTEM) was used to determine the AgI phases (Fig.1); complementary evidence, including XRD, is provided in the Supplementary Information. A lattice-spacing analysis and zone-axis calculations identify low-temperature crystals as consistent with the zincblende \gamma -AgI (111) [Fig. 1 (e)], whereas the higher-temperature crystals exhibit spacings and orthogonal-plane relationships consistent with \beta -AgI(101) plane as the exposed surface (see Supplementary Information). These assignments are further supported by polarization-resolved SHG and 2PPL analyses (see below). The combined STEM and optical signatures therefore suggest that triangular platelets preferentially adopt the zincblende \gamma -AgI, while elongated rods are associated with the hexagonal wurtzite \beta -AgI. III Results and discussion Phase-selective SHG and excitonic 2PPL Figure 2: Wavelength-resolved nonlinear emission from an individual AgI triangular flake. Normalized photoluminescence spectra were collected while tuning the excitation wavelength from 784 nm to 798 nm. Each trace exhibits two distinct features: (i) a narrow band at 388–398 nm attributed to second-harmonic generation (SHG), which shifts according to \lambda/2 of the fundamental excitation; and (ii) a broader band centered at 412–420 nm assigned to excitonic emission, whose peak position remains nearly constant while its intensity varies with the pump wavelength. The inset shows a representative triangular crystal from the same substrate used for the measurement. All intensities are plotted in arbitrary units (A.U.). SHG and 2PPL measurements were performed using a custom system described in Ref. 18 . An ultrafast pulsed laser with a pulse width of 80 fs and a near-infrared wavelength of 780-830 nm was used as an incident beam. In polarization-resolved measurements, the laser beam passed through a linear polarizer before reaching the sample and another polarizer selected polarization component parallel to the incident laser polarization in the detection path, while sample being rotated by a rotational stage. All the optical measurements were performed at room temperature. Figure 2 presents wavelength-resolved nonlinear emission spectra from an individual AgI triangular flake. The spectra reveal two distinct peaks: (i) a shorter-wavelength band at 388–398 nm corresponding to SHG, confirmed by its \lambda_{out}=\lambda_{in}/2 dependence and (ii) a broader peak at approximately 416 nm, assigned to the excitonic transition. The exciton emission varied from 412 nm to 440 nm depending on the measured flake, likely originating from different crystal phases as detailed below. Since the fundamental laser energy is less than the estimated bandgap of around 3 eV in AgI 6 , the observed exciton peak is attributed to