Ferromagnetic interface engineering of spin-charge conversion in RuO 2

Dongchao Yang, Zhaoqing Li, Yu Dai, Lili Lang, Zhong Shi, Zhe Yuan, Shi-Ming Zhou · 2025

Read Ferromagnetic interface engineering of spin-charge conversion in RuO 2 by Dongchao Yang, Zhaoqing Li, Yu Dai, Lili Lang, Zhong Shi, Zhe Yuan, Shi-Ming Zhou (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-21100.txt.

Introduction

Dongchao Yang, Shi-Ming Zhou, and five co-authors show that in spintronics the neighbor chooses the physics. Ruthenium dioxide, a leading d-wave altermagnet candidate, converts spin current to charge current. But spin-pumping experiments find the effective conversion angle flips sign depending on which ferromagnet sits on top. One bilayer uses insulating YIG, the other metallic permalloy. The reversal persists whether the oxide layer is crystalline or polycrystalline, ruling out bulk quality as the explanation.

A hair-thin gold spacer flips the YIG signal again, exposing an interfacial Rashba-Edelstein mechanism there, while the permalloy stack follows the bulk inverse spin Hall effect. First-principles calculations pin the difference on interface-selective band hybridization: Rashba surface states survive at the insulating contact and are quenched by the metal. Device designers gain a deterministic knob for building field-free, low-dissipation memory.

Catalog record

CREATORDongchao Yang, Zhaoqing Li, Yu Dai, Lili Lang, Zhong Shi, Zhe Yuan, Shi-Ming Zhou
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-21100

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ferromagnetic interface engineering of spin-charge conversion in RuO 2 Dongchao Yang, Zhaoqing Li, Yu Dai, Lili Lang, Zhong Shi, Zhe Yuan, Shi-Ming Zhou Abstract Spin-orbit torque efficiency is conventionally fixed by bulk materials. D D -wave altermagnets introduce an additional nonrelativistic spin-charge conversion channel beyond inverse spin-Hall effect. Using prototypical candidate RuO 2 as an example, we show that the adjacent ferromagnet alone can dictate both the magnitude and sign of spin-charge conversion. Spin-pumping measurements on RuO 2 /Y 3 Fe 5 O 12 (YIG) and RuO 2 /Ni 80 Fe 20 (Py) bilayers yield opposite effective spin-Hall angles that persist across crystalline and polycrystalline RuO 2 . Inserting an ultrathin Au spacer at the RuO 2 /YIG interface reverses the signal, envidencing a dominant interfacial inverse Rashba-Edelstein effect, whereas RuO 2 /Py is governed by bulk inverse spin-Hall effect. First-principles calculations trace this dichotomy to interface-selective band hybridization: Rashba surface states survive at the insulating YIG contact yet are quenched by metallic Py. Our findings establish ferromagnetic interfacing as a deterministic knob for tailoring spin-charge conversion in altermagnetic oxides, paving the way to field-free, low-dissipation spintronic memory devices. Introduction.— Spin-orbit torque (SOT) manchon2019current ; song2021spin offers an energy-efficient route to magnetization switching in spintronic devices, typically mediated by the spin Hall effect (SHE) liu2012spin ; liu2012current in heavy metals. The SHE, however, is bound by symmetry: spin current, spin polarization, and charge current must be mutually orthogonal sinova2015spin . In perpendicular magnetized bilayers, this condition prevents deterministic switching without an auxiliary in-plane field. Symmetry can be broken by sophisticated fabrication techniques, such as wedge-shaped layers cai2017electric or spatially inhomogeneous ferromagnetic layers tang2020bulk . But a simpler strategy is to inject an out-of-plane ( z -polarized) spin current. Such collinear spin currents can be produced in low-symmetry two-dimensional crystals macneill2017control , ferromagnetic alloy yang2024highly or via the anisotropic spin splitting effect (ASSE) naka2019spin ; yuan2020giant ; hayami2020bottom ; yuan2021strong ; naka2021perovskite ; gonzlez2021efficient recently uncovered in altermagnets smejkal2022beyond ; smejkal2022emerging ; savitsky2024researchers . Owing to its large predicted ASSE and simple rutile structure, RuO 2 is a leading candidate in this class. Charge-to-spin conversion driven by the ASSE has been demonstrated in RuO 2 by spin-torque ferromagnetic resonance (FMR) and harmonic Hall measurements bai2022observation ; karube2022observation ; bose2022tilted ; zhang2024simultaneous ; guo2024direct , while its inverse process has been detected by spin Seebeck effect bai2023efficient ; liao2024separation , terahertz emission liu2023inverse , and spin-pumping experiments guo2024direct ; wang2024inverse . Direct measurements of the ASSE-induced torque have been reported bai2022observation ; karube2022observation , and tuned by rotating the Néel vector with field annealing. Competing contributions from the SHE and its inverse have also been observed liao2024separation ; wang2024inverse ; sun2017dirac , but the shared angular dependence of ASSE- and SHE-generated spin currents makes their separation difficult bose2022tilted ; wang2024inverse . While reciprocal measurements on RuO 2 /Ni 80 Fe 20 (Py) bilayers assigned a positive spin Hall angle (SHA) wang2024inverse , independent studies of RuO 2 /Y 3 Fe 5 O 12 (YIG) systems reported a negative SHA wang2025robust . This puzzling sign discrepancy further complicates the ongoing debate over altermagnetism in RuO 2 fedchenko2024observation ; smolyanyuk2024fragility ; zhu2019anomalous ; berlijn2017itinerant ; feng2022an ; hiraishi2024nonmagnetic ; kessler2024absence ; wenzel2025fermi ; jovic2018dirac ; zhang2025probing ; kiefer2025crystal ; liu2024absence ; jeong2024altermagnetic ; gregory2022strain ; qian2025fragile . Disentangling possible additional contributions is therefore indispensable for unambiguous experimental verification of the ASSE and for clarifying the magnetic ground state of RuO 2 . Figure 1: (a) Schematic of the RuO 2 (101)/FM bilayer. The gray bar indicates the etched stripe for spin-pumping detection, positioned between a coplanar waveguide. (b) Experimental arrangement. Microwave excites FMR in the FM layer and spin-charge conversion is read out as a dc voltage across the stripe. (c) Cross-sectional TEM image of the RuO 2 (101)/YIG bilayer. Inset: FFT of a selected RuO 2 region confirming single-crystal quality. (d) Measured voltage of the RuO 2 (101)(15 nm)/YIG(42 nm) bilayers as a function of applied magnetic field. The arrow marks the peak value \Delta V_{\rm SP} . Inset: reference signal from a polycrystalline Pt(4 nm)/Py(6 nm) bilayer recorded under the identical conditions. (e) Corresponding data for the RuO 2 (101)(15 nm)/Py(6 nm) bilayers; note the sign reversal with respect to (d). (f) Angular dependence of \Delta V_{\rm SP} for both systems. Symbols are the experimental data and the solid lines illustrate \textrm{cos}^{2}\varphi_{c} fits. The error bars are defined as (|\Delta V_{\rm SP}(H_{+})|-|\Delta V_{\rm SP}(H_{-})|)/2 with \Delta V_{\rm SP}(H_{+}) and \Delta V_{\rm SP}(H_{-}) measured at the positive and negative FMR fields, respectively. Here we resolve the conflicting SHAs by identifying an inverse Rashba-Edelstein effect (IREE) that dominates spin-charge conversion at the RuO 2 /YIG interface. Spin-pumping measurements reveal a robust, negative effective SHA in RuO 2 /YIG, which is reversed when a thin Au interlayer is inserted to suppress this interfacial effect. RuO 2 /Py displays a positive SHA governed by bulk inverse SHE (ISHE). First-principles calculations show that Rashba-type surface states, generated once spin-orbit coupling (SOC) removes the topological protection, survive at the RuO 2 /YIG interface owing to negligible band hybridization, but are quenched at the RuO 2 /Py interface. These findings establish interface engineering as a powerful knob for tailoring spin-orbit phenomena in altermagnetic systems and chart a route to field-free, energy-efficient magnetization control. Spin-charge conversion in RuO 2 /FM bilayers.— We prepared RuO 2 (101)/YIG and RuO 2 (101)/Py bilayers to quantify spin-charge conversion via spin pumping. First, 15-nm-thick (101)-oriented RuO 2 films were epitaxially grown on Al 2 O 3 ( 1\bar{1}02 ) substrates by pulsed-laser deposition at 450 {}^{\circ}\mathrm{C} . A 42-nm-thick polycrystalline YIG layer was then deposited at 350 {}^{\circ}\mathrm{C} and post-annealed in air at 850 {}^{\circ}\mathrm{C} for 8 minutes. High-temperature annealing preserves the RuO 2 crystallinity SM . For the RuO 2 (101)/Py stack, a 6-nm-thick polycrystalline Py layer was sputtered at room temperature. Both heterostructures were lithographically patterned into 20~\mu{\rm m}\times 2~{\rm mm} stripes along selected RuO 2 crystallographic directions, as sketched in Fig. 1 (a). Here \varphi_{c} denotes the angle between the stripe axis and the [010] direction. High-resolution transmission electron microscopy (TEM) image in Fig. 1 (c) confirms the single-crystal quality of RuO 2 (101); further fabrication details are provided in the Supplemental Material SM . Spin pumping was carried out in the configuration sketched in Fig. 1 (b). A microwave magnetic field introduced by a coplanar waveguide (50 \mu m from the sample) drives FMR in the ferromagnet (FM) layer, and the resulting spin current is converted into a dc voltage across the RuO 2 stripe. Throughout the measurement, an external magnetic field is applied perpendicular to the stripe, irrespective of \varphi_{c} . Figure 1 (d) shows the voltage versus the applied magnetic field H for the RuO 2 /YIG bilayer. Sharp peaks at H=\pm 1.8 kOe mark FMR; the sign reversal at opposite fields reflects the inverted spin-current polarization. Control measurements on single Py layers confirm negligible self-induced effects SM . The largest and smallest signals occur at \varphi_{c}=90~^{\circ} and \varphi_{c}=0~^{\circ} , respectively. Figure 2: (a) Device sketch. Distinct FMR fields of YIG and Py allow spin current to be injected into the nonmagnetic layer from either side within one

Read the complete text