Observations of the 21 cm HI Line from the Milky Way galaxy using Pyramidal Horn Radio Telescope

Kaustav Bhattacharjee, Himanshu Grover, P. Arumugam · 2025

Read Observations of the 21 cm HI Line from the Milky Way galaxy using Pyramidal Horn Radio Telescope by Kaustav Bhattacharjee, Himanshu Grover, P. Arumugam (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-19262.txt.

Introduction

Kaustav Bhattacharjee, Himanshu Grover, and P. Arumugam built a small radio telescope from a pyramidal horn to hear the Milky Way's hydrogen line. Neutral hydrogen glows at a wavelength of twenty-one centimeters, a classic tracer of galactic gas. Their receiver uses a software-defined radio pipeline and drift scans, letting the sky sweep past.

After calibration, the modest setup produced hydrogen sky maps, a galactic rotation curve, and signs of spiral arm structure. Those are real research products, not just a classroom demo. The authors present the system as proof that low-cost gear can serve both teaching and genuine study of galactic structure at radio wavelengths.

Catalog record

CREATORKaustav Bhattacharjee, Himanshu Grover, P. Arumugam
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-19262

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Observations of the 21 cm HI Line from the Milky Way galaxy using Pyramidal Horn Radio Telescope Kaustav Bhattacharjee, Himanshu Grover, P. Arumugam Abstract We present the design, implementation, and operation of a pyramidal horn radio telescope built for detecting the Galactic 21 cm neutral hydrogen line emission. The system employs an SDR-based pipeline to obtain drift-scan observations, which were calibrated and processed to generate HI sky maps, a Galactic rotation curve and spiral arm features. This demonstrates that this low-cost system is effective both for educational purposes and scientific exploration of Galactic structure at radio frequencies. I Introduction The hyperfine transition line of neutral hydrogen ( HI ) provides a powerful tool for probing the structure and dynamics of the Milky Way and other galaxies. Spin-spin coupling between the electron and proton of neutral hydrogen atom breaks the spin degeneracy of its 1s ground state and produces two hyperfine levels with an energy gap \Delta E given by: \Delta E=\frac{4g_{p}\hbar^{4}}{3m_{p}m_{e}^{2}c^{2}a_{0}^{4}}=5.874\,\mu\text{eV}, (1) where all symbols have their usual physical meaning (see 7 7 ). The frequency \nu of the photon emitted in a transition from the triplet state to the singlet state, using Planck’s formula relating energy and frequency, is \nu=\frac{\Delta E}{h}=1420.405\,\text{MHz}. (2) Dutch astronomer Hendrik van de Hulst predicted the existence of this radio spectral line in 1944 ( 23 23 ). Jan Oort recognised that, due to its long wavelength, such a spectral line would allow astronomers to probe the structure and differential rotation of the Galaxy through the extensive clouds of dust in the Galactic plane that absorb all visible light within merely a few thousand light years ( 17 17 ). Since its first detection in March of 1951 by Harold Ewen and Edward Purcell ( 5 5 ) using a horn antenna at the Lyman Laboratory of Harvard University, the 21 cm hydrogen line has become a cornerstone of astrophysical research. This emission line is a key observational feature in radio astronomy, providing critical insights into Galactic rotation curves and spiral arm structures ( 22 22 ), and the distribution of interstellar matter. Figure 1 : Pyramidal Horn Radio Telescope. In recent years, there has been a growing interest in developing accessible and low-cost radio telescope systems to enable student and amateur participation in observational radio astronomy; some of these include instruments such as the BHARAT dual-mode conical horn telescope demonstrated by 16 ( 16 ), the 91cm x 81cm aperture pyramidal horn telescope made by 11 ( 11 ), and the 70 cm x 60 cm aperture pyramidal horn designed by 18 ( 18 ). We present the design and implementation of a pyramidal horn radio telescope tailored for detecting the 21 cm HI line, developed as part of the activities of the Radio Telescope Project 1 1 1 https://iitr.ac.in/rtp of the Physics and Astronomy Club 2 2 2 https://paac.iitr.ac.in/ at IIT Roorkee. Our horn design emphasises mechanical simplicity and effective signal collection. The telescope system described here uses a pyramidal horn antenna optimised for operation at 1.42 GHz, combined with a low-noise receiver chain and software-defined radio (SDR) backend. The complete setup is shown in Figure 1 . The primary goal was to make a functional platform capable of detecting Galactic HI emission with sufficient sensitivity and resolution to allow the study of the Milky Way’s rotation curve. The outline of the paper is as follows: Section II discusses the construction of the horn and waveguide. Section III describes the analogue electronic components and the SDR used in the setup. Section IV then presents the electromagnetic simulations and the characterisation calculations of the antenna performance. Section V discusses the GNU Radio flowgraph design. The observational strategy is presented in Section VI , covering the scanning and calibration procedures. Section VII outlines the data analysis methodology. Finally, Section VIII presents the results of the observations, which include the processed Galactic maps, the derived velocity curve, and the identification of spiral arms. (a) Laser-cut petals of the horn (b) Folded and joined petals (c) Waveguide with drilled hole for the probe (d) Probe attached to the waveguide Figure 2 : Construction of the feedhorn assembly. II Construction of Horn and Waveguide The feedhorn was constructed following the pyramidal design of the Digital Signal Processing in Radio Astronomy (DSPIRA) project ( 25 25 ). The aperture dimensions were 75 cm × 60 cm, sufficiently large to allow passage through most doorways. The fabrication process is summarised in Figure 2 . The horn body was fabricated from 1 mm thick stainless steel sheets, which were laser-cut into trapezoidal petals with flared strips along the edges to allow assembly, as seen in Figure 2(a) . The flares were bent to right angles relative to the petals by hammering them gently, after which the petals were aligned, drilled, and riveted together to form the horn structure, as seen in Figure 2(b) . At the narrow end of the horn, a stainless steel enclosure was similarly riveted to house the waveguide. A commercially available F-style 1-gallon rectangular paint thinner can was used as the waveguide cavity, chosen for its suitable dimensions of 16.8\times 10.2\times 24.1 cm 3 . The top portion of the can, including the handle and spout, was removed, and a feed port was prepared by drilling a hole in the sidewall 5.25 cm from the closed end, as seen in Figure 2(c) . An N-type female 4-hole panel mount connector, seen in Figure 2(d) , was screwed to the waveguide wall, with a 5.25 cm copper wire soldered to its central conductor and extending inside as the probe. The can was snugly fitted into the enclosure, allowing for easy insertion, removal, or replacement as required. (a) Support stand without Feedhorn (b) The elevation locking mechanism Figure 3 : The support mechanism. The interior surfaces of both the horn and the waveguide were lined with aluminium foil tape to improve conductivity. Care was taken to ensure smooth, continuous coverage without gaps. A support stand was manufactured to hold and orient the feedhorn assembly, shown in Figure 3 . The frame, seen without the horn in Figure 3(a) , was constructed using heavy metal tube welded into a large square base for stability. Two vertical columns were fixed to the base, supporting a horizontal axle that allowed rotation of the mounted feedhorn in the elevation plane. An inner frame, composed of angled iron brackets, was welded to the axle. The feedhorn assembly was fixed in this inner frame by using cables. One end of the axle was equipped with a manual locking mechanism to secure the desired elevation angle. This locking mechanism comprised a steel bar ending in a cylindrical knob with a threaded hole. A locking screw passed through this knob and could be tightened into a perforated steel plate fixed to the outer frame. The plate, seen clearly in Figure 3(b) , featured an array of holes spaced 5 degrees apart distributed along a semicircular arc, corresponding to different elevation angles. By aligning the screw with the desired hole and tightening it, the feedhorn’s elevation could be fixed securely, preventing any unintended motion during observation. III The Radio Frequency Signal Chain Figure 4 : Block diagram of

Read the complete text