Systematic search of laser and phase modulation noise coupling in heterodyne interferometry
Kohei Yamamoto, Olaf Hartwig, Lennart Wissel, Holly Leopardi, Kenji Numata, Ryan Derosa · 2025
Read Systematic search of laser and phase modulation noise coupling in heterodyne interferometry by Kohei Yamamoto, Olaf Hartwig, Lennart Wissel, Holly Leopardi, Kenji Numata, Ryan Derosa (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17802.txt.
Introduction
Kohei Yamamoto and five coauthors work on a noise problem for LISA, a planned space mission that will sense gravity waves with lasers between satellites. The method uses mixed laser signals, and an added phase pattern helps compare clocks. That same pattern can leak stray noise into the final readings.
The team built a math framework that hunts down every path by which laser noise and pattern noise can couple into the signal. A computer test confirmed the framework catches the main couplings. Using LISA like numbers, they turn the results into clear limits on how much high frequency noise the lasers may carry.
Catalog record
| CREATOR | Kohei Yamamoto, Olaf Hartwig, Lennart Wissel, Holly Leopardi, Kenji Numata, Ryan Derosa |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 133 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-17802
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Systematic search of laser and phase modulation noise coupling in heterodyne interferometry Kohei Yamamoto, Olaf Hartwig, Lennart Wissel, Holly Leopardi, Kenji Numata, Ryan Derosa Abstract Heterodyne interferometry for precision science often comes with an optical phase modulation, for example, for intersatellite clock noise transfer for gravitational wave (GW) detectors in space, exemplified by the Laser Interferometer Space Antenna (LISA). The phase modulation potentially causes various noise couplings to the final phase extraction of heterodyne beatnotes by a phasemeter. In this paper, in the format of space-based GW detectors, we establish an analytical framework to systematically search for the coupling of various noises from the heterodyne and modulation frequency bands, which are relatively unexplored so far. In addition to the noise caused by the phase modulation, the high-frequency laser phase noise is also discussed in the same framework. The analytical result is also compared with a numerical experiment to confirm that our framework successfully captures the major noise couplings. We also demonstrate a use case of this study by taking the LISA-like parameters as an example, which enables us to derive requirements on the level of the laser and phase modulation noises in the high frequency regimes. I Introduction Heterodyne interferometry is an optical technique widely used in precision science 2 ; 1 ; 14 ; 11 ; 10 . Essential ingredients are two electromagnetic fields with a frequency offset, the so-called heterodyne frequency, a beam combiner to generate their optical beatnote at the heterodyne frequency, a photoreceiver (PR) to convert the optical power to an electronic voltage signal, and a phasemeter to measure the phase of the heterodyne beatnote. The interferometer used as a transducer reports the observable of interest in an experimental setup, often spatial displacement, via the phase signal with very high precision and/or accuracy. This technique is often combined with an optical modulation to transfer or acquire additional information, for example, intersatellite clock synchronization or absolute ranging for spaceborne gravitational-wave detectors like the Laser Interferometer Space Antenna (LISA) 5 . LISA aims to observe gravitational waves (GWs) in the millihertz regime by configuring interspacecraft heterodyne interferometers with three spacecraft separated by around 2.5 million kilometer. For the purpose of differential clock noise reduction, LISA phase-modulates an outgoing beam with an onboard system clock around 2.4\text{\,}\mathrm{GHz} and extracts the phase of the heterodyne beatnotes not only between beam carriers that have the information of GWs but also between the clock sidebands in which the onboard clock difference is encoded 8 ; 30 . All heterodyne frequencies in the constellation are adjusted within 5\text{\,}\mathrm{MHz}30\text{\,}\mathrm{MHz} via laser offset lock, so-called frequency planning 9 . Since we modulate the phase of the primary laser carrier, this could naturally cause additional noise couplings in the metrology chain. From the perspective of the clock noise transfer, the coupling of the noise in the observation band, namely 0.1\text{\,}\mathrm{mHz} to 1\text{\,}\mathrm{Hz} , has been studied in great depth 3 ; 12 ; 31 ; 26 . However, the working principle of the phasemeter is known to also cause the unavoidable coupling of noises at the frequencies related to heterodyne beatnotes, e.g., the integer multiple of the heterodyne frequency 24 ; 23 ; 4 . The combination of the multiple heterodyne beatnotes and the phasemeter architecture in LISA could generate numerous noise couplings from the heterodyne band. In this paper, we systematically search for the coupling of modulation noises above the GW observation band to the final phase extraction of individual heterodyne beatnotes by the phasemeter. In addition to the noise caused by phase modulation, the coupling of the laser phase noise is also discussed in the same analytical framework. The noise frequency band of interest is not only the heterodyne band but also the modulation band (the MHz and GHz regime for LISA, respectively). The noise couplings found analytically are compared with those found by numerical simulation to confirm that our analytical framework successfully captures major noise contributions. Finally, we demonstrate a use case of this study by applying it to the LISA-like set of requirements, which enables us to derive new requirements on the high-frequency noise sources in the system. II Framework This section sets up a basic framework, which will then be used for systematic search for noise couplings in the following sections. In section II.1 , we first formulate a modulation signal with different noises (relative amplitude noise a_{i} , phase noise \theta_{i} , and additive noise v_{i} ). In section II.2 , we then model the phase-modulated electromagnetic field representing a laser beam to the first-order modulation sidebands: an upper sideband (usb) and a lower sideband (lsb). In section II.3 , a PR signal with three heterodyne beatnotes (carrier-carrier, usb-usb, and lsb-lsb beatnotes) is described. A general expression of readout noise at beatnote phase extraction by a phasemeter in appendix A will be applied to the PR signal throughout the paper. In section II.4 , we wrap up this section by clarifying our strategy of the search for the noise coupling based on the framework. II.1 Modulation signal We consider the case of modulating a beam phase with a sinusoidal signal. Let us formulate the modulation signal V_{i} in units of voltage that drives an electro-optic modulator (EOM) as \displaystyle V_{i}(\tau) \displaystyle=a_{0}(1+a_{i}(\tau))\cos(\omega_{\mrm{m},i}\tau+ \phi^\mrm{sb}_{\mrm{tar},i}(\tau) + \theta_i(\tau))+v_{i}(\tau), (1) where a_{0} is a nominal modulation amplitude; \omega_{\mathrm{m},i} is an angular frequency of the sinusoidal modulation signal, related to the frequency f_{\mathrm{m},i} by \omega_{\mathrm{m},i}=2\pi f_{\mathrm{m},i} ; \phi^{\mathrm{sb}}_{\mathrm{tar},i} is the target phase to encode onto modulation sidebands; a_{i} is a modulation relative amplitude noise; \theta_{i} is a modulation additive phase noise; v_{i} is a modulation additive voltage noise. i is an index to label a modulation signal and an associated laser beam ( i\in\{i,j\} ). II.2 Laser beam A non-modulated electromagnetic field representing a laser beam can be formulated as \displaystyle E_{i}=A_{i}\cdot\exp(j\omega_i\tau+ j\phi^\mrm{car}_{\mrm{tar},i}(\tau) + jp_i(\tau)), (2) where A_{i} is a nominal amplitude; \omega_{i} is a laser angular frequency, related to the frequency f_{i} by \omega_{i}=2\pi f_{i} ; \phi^{\mathrm{car}}_{\mathrm{tar},i} is the target phase that we aim to measure with a phasemeter at the end; p_{i} is a laser phase noise in radian. In this paper, we assume that A_{i} is constant. The noise coupling of the beam amplitude, caused by the relative intensity noise (RIN), can be found in 24 ; 23 . Next, we phase-modulate the beam in eq. 2 using the modulation signal in eq. 1 . We consider the EOM as a pure linear converter of an input voltage to a phase with a conversion factor of \pi/V_{\mathrm{\pi}} where V_{\mathrm{\pi}} is determined by the EOM specification. Therefore, the actual modulation phase becomes \displaystyle\phi_{i}(\tau) \displaystyle=\frac{\pi}{V_{\mathrm{\pi}}}V_{i}(\tau). (3) As a result, the phase-modulated laser beam reads as follows: \displaystyle E_{i} \displaystyle=A_{i}\cdot\exp(j\omega_i\tau+ j\phi^\mrm{car}_{\mrm{tar},i} + jp_i + j\phi_i) \displaystyle=A_{i}\cdot\exp\left(j\omega_{i}\tau+j\phi^{\mathrm{car}}_{\mathrm{tar},i}+j(p_{i}+n_{i})\right. \displaystyle\hskip 42.67912pt\left.+jm_{i}\cos(\omega_{\mrm{m},i}\tau+ \phi^\mrm{sb}_{\mrm{tar},i} + \theta_i)\right), (4) since we define \displaystyle m_{i} \displaystyle=m_{0}(1+a_{i}), (5) \displaystyle m_{0} \displaystyle=\frac{\pi}{V_{\mathrm{\pi}}}a_{0}, (6) \displaystyle n_{i} \displaystyle=\frac{\pi}{V_{\mathrm{\pi}}}v_{i}. (7) where m_{0} is a modulation depth in radian. Here and throughout the rest of the paper, we omit the time arguments for simplicity. We apply the Jacobi-Anger expansion to eq. 4 , to first-order modulation sidebands, \displaystyle E_{i} \displaystyle=A_{i}\cdot\exp\left(j\omega_{i}\tau+j\phi^{\mathrm{car}}_{\mathrm{tar},i}+j(p_{i}+n_{i})\right) \displaystyle\hskip 0.0pt\cdot\left(J_{0}(m_{i})+jJ_{1}(m_{i})\mathrm{e}^{j(\omega_{\mathrm{m},i}\tau+\phi^{\mathrm{sb}}_{\mathrm{tar},i}+\theta_{i})}+jJ_{1}(m_{i})\mathrm{e}^{-j(\omega_{\mathrm{m},i}\tau+\phi^{\mathrm{sb}}_{\mathrm{tar},i}+\theta_{i})}\right), (8) where J_{n}(x) is the Bessel function of the first kind. Noise couplings due to the higher-order modulation