Augmented Affine Frequency Division Multiplexing for Both Low PAPR Signaling and Diversity Gain Protection

Zhou Lu, Mohammed El-Hajjar, and Lie-liang Yang · 2025

Read Augmented Affine Frequency Division Multiplexing for Both Low PAPR Signaling and Diversity Gain Protection by Zhou Lu, Mohammed El-Hajjar, and Lie-liang Yang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17679.txt.

Introduction

Zhou Lu, Mohammed El-Hajjar, and Lie-liang Yang fix the biggest flaw in a rising radio waveform design. AFDM packs data onto chirp-like carriers that handle fast-moving receivers well, a need for future wireless. Like its older cousin OFDM, though, its signal spikes demand power-hungry amplifiers that waste energy and distort the wave.

Their redesign, A2FDM, swaps out a matrix the original scheme never needed for signalling. The replacement folds data mapping and a small Fourier step into one operation, offered in interleaved and localized flavors. Simulations show the peak-power problem disappears. Better still, the new scheme keeps the full diversity gain that plain AFDM loses under harsh settings. Phones and base stations could get the motion-proofing without the power penalty.

Catalog record

CREATORZhou Lu, Mohammed El-Hajjar, and Lie-liang Yang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE69 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-17679

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Augmented Affine Frequency Division Multiplexing for Both Low PAPR Signaling and Diversity Gain Protection The authors are with the School of Electronics and Computer Science, University of Southampton, Southampton SO17 1BJ, United Kingdom (emails: [email protected], {meh,lly}@ecs.soton.ac.uk). The authors would like to acknowledge the financial support of the Engineering and Physical Sciences Research Council (EPSRC) projects under grants EP/X01228X/1, EP/X04047X/1 and EP/Y037243/1, as well as the Future Telecoms Research Hub, Platform for Driving Ultimate Connectivity (TITAN). Zhou Lu, Mohammed El-Hajjar, and Lie-liang Yang Abstract Research results on Affine Frequency Division Multiplexing (AFDM) reveal that it experiences the same Peak-to-Average Power Ratio (PAPR) problem as conventional Orthogonal Frequency-Division Multiplexing (OFDM). On the other side, some references and also our studies demonstrate that AFDM involves an unneeded matrix, which is based on a parameter typically represented by c 2 c_{2} , for signalling. Hence, in this paper, an augmented AFDM scheme, referred to as A 2 FDM, is proposed to mitigate the PAPR problem of AFDM, which is achieved by replacing the c 2 c_{2} matrix in AFDM by a new unitary matrix that performs both sub-block-based Discrete Fourier Transform (DFT) and symbol mapping. Two symbol mapping schemes, namely interleaved mapping and localized mapping, are proposed for implementing A 2 FDM, yielding the Interleaved A 2 FDM and Localized A 2 FDM. The input-output relationships of these schemes are derived and the complexity and the effects of system parameters on the performance of A 2 FDM along with AFDM systems are analyzed. Furthermore, simulation results are provided to demonstrate and compare comprehensively the performance of the considered schemes in conjunction with different system settings and various operational conditions. Our studies and results demonstrate that, while A 2 FDM is capable of circumventing the PAPR problem faced by AFDM, it is capable of attaining the achievable diversity gain, when AFDM is operated in its undesirable conditions resulting in the loss of the diversity gain available. I Introduction Next-generation wireless systems, including Beyond Fifth Generation (B5G) and Sixth Generation (6G) wireless networks, are expected to meet the demands of communications in high-mobility scenarios for high throughput, low latency, and ultra-massive connectivity [ 1 ] . Employing such capabilities is particularly crucial for the reliable communications on high-frequency bands in the environments, such as, Vehicle-to-Everything (V2X) networks, high-speed rail, and Unmanned Aerial Vehicle (UAV) systems [ 2 ] . As a typical classic multicarrier technique, Orthogonal Frequency Division Multiplexing (OFDM) has been widely adopted in the standardized wireless systems, which demonstrates robust performance in low to mild time-varying frequency-selective fading channels [ 3 ] . However, in high-mobility scenarios, the pronounced Doppler frequency shifts associated with multiple propagation paths exacerbate the time-varying multipath fading, leading to significant signal distortion, disrupting the orthogonality between subcarriers, and ultimately, degrading the achievable system performance reflected by throughput and reliability [ 4 ] . Moreover, OFDM struggles to achieve diversity gain in linear time-varying (LTV) channels, preventing it from achieving the optimal performance, especially, in high-mobility communications scenarios [ 5 ] . Orthogonal Time Frequency Space (OTFS), proposed by Hadani in 2017, has been regarded a prominent two-dimensional (2D) modulation scheme, which demonstrates strong resilience to Doppler frequency shifts while inheriting most of the advantages of OFDM [ 5 ] . With the aid of the Zak transform, OTFS directly maps information symbols onto the 2D delay-Doppler grids, allowing superior performance in diverse communications conditions. OTFS aided by effective equalization methods is capable of addressing the fading and time-varying challenges often encountered by OFDM, enabling full diversity provided in the time and frequency domains [ 6 ] . However, OTFS has some notable drawbacks, including the increased overhead as the result of its usage of the 2D transformations for pilot signalling and multi-user multiplexing [ 7 ] . To address the limitations of OTFS and OFDM but take their respective advantages, Ali Bemani et al. introduced the Affine Frequency Division Multiplexing (AFDM) in 2021 [ 8 , 9 ] . Fundamentally, AFDM belongs to a multicarrier modulation approach innovatively built upon the framework of conventional OFDM. With AFDM, data symbols are transmitted using the orthogonal chirp signals generated from the Inverse Discrete Affine Fourier transform (IDAFT) [ 10 ] . In contrast to OFDM and also Orthogonal Chirp Division Multiplexing (OCDM) [ 11 ] , AFDM offers enhanced flexibility via its tunable parameters. As shown in [ 10 , 12 ] , when appropriately set, these parameters allow for the efficient separation of the multipath components after the Discrete Affine Fourier transform (DAFT) at the receiver. Consequently, a comprehensive and sparse representation of the channel’s delay-Doppler (DD) characteristics can be obtained, supplying potentially diversity gain. More specifically, via adapting the parameters of AFDM to the DD profile of wireless channel, AFDM is capable of spreading data symbols across the whole time-frequency plane. Hence, provided that a sufficiently powerful receiver equalizer is implemented to suppress the embedded interference, full diversity gain is available, which is comparable to the performance of OTFS [ 13 ] . Furthermore, AFDM enjoys almost-perfect compatibility with the standard OFDM, and embraces OFDM and OCDM as the special signalling schemes within its framework [ 3 ] . The superb compatibility, plus its robustness and attractive performance in the highly time-varying channels, render AFDM as one of the promising candidate signaling waveforms for applications in high-mobility scenarios in the next generation wireless communications systems. Research on AFDM is still in its early stages, which has already shown significant promise as a new waveform for high-mobility applications [ 3 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 ] . More specifically, in literature, there are several studies that analyzed the adaptability of AFDM to various communication challenges. For instance, the modulation and demodulation techniques based on discrete Fourier transform (DFT) instead of DAFT have been studied in [ 14 ] . This allows AFDM to function as a precoded OFDM waveform, ensuing compatibility with the existing OFDM systems. To address the synchronization and channel estimation challenges in AFDM systems, the authors of [ 15 ] proposed a maximum likelihood (ML) method, which leverages the redundant information contained in the chirp-periodic prefix (CPP) for more accurate synchronization. In [ 16 ] , the authors introduced a pilot-assisted channel estimation method for AFDM systems, which allows to achieve the performance comparable to that by the systems with ideal channel state information (CSI). In the context of the time-varying sparse channels, the authors of [ 17 ] compared the overhead required for channel estimation when various signalling waveforms are employed. It is shown that AFDM is capable of achieving the target mean square error (MSE) performance for channel estimation with a lower number of pilots and also a lower guard interval than the state-of-the-art single-carrier modulation (SCM), OFDM, and OTFS. AFDM has also been investigated in terms of its potential for integrated sensing and communication (ISAC) applications [ 18 , 19 , 22 ] . Specifically, it is demonstrated in [ 18 ] that AFDM is able to decouple the delay and Doppler effects within a relatively short time, and maintain robust sensing performance even when experiencing significant Doppler shifts. The comparative studies in

Read the complete text