Refrigeration of a 1D gas of microwave photons

Lukas Schamriß, Louis Garbe, Peter Rabl · 2025

Read Refrigeration of a 1D gas of microwave photons by Lukas Schamriß, Louis Garbe, Peter Rabl (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17530.txt.

Introduction

Lukas Schamriß, Louis Garbe, and Peter Rabl describe a way to refrigerate a gas made not of atoms but of microwave photons, in a 2025 theory paper. The photons travel inside a superconducting transmission line, a wire like channel used in quantum hardware. Cooling them below what standard lab fridges reach would open new experiments.

A nonlinear Josephson element at one end of the line moves photons from high frequency modes into low frequency ones while keeping their total number fixed. The authors work out the steady state that results when this cooling fights the natural warming from the surroundings. With realistic settings, they predict temperatures below a millikelvin, far colder than a dilution refrigerator's base. The setup also shows a new kind of condensation, which they suggest could serve quantum simulations.

Catalog record

CREATORLukas Schamriß, Louis Garbe, Peter Rabl
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE64 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-17530

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Refrigeration of a 1D gas of microwave photons Preprint: APS/123-QED Lukas Schamriß, Louis Garbe, Peter Rabl Abstract We discuss a conceptually simple scheme for cooling a one dimensional gas of microwave photons in a superconducting transmission line. By shunting one end of the transmission line by a nonlinear Josephson element, we show how a cooling mechanism can be engineered that transfers photons from high- into low-frequency modes, while preserving their total number. We evaluate the resulting nonequilibrium steady state of the photon gas, which arises from a competition between this engineered cooling process and the natural, number non-conserving thermalization with the surrounding bath. Our analysis predicts that for realistic experimental parameters, this mechanism can be used to prepare photonic gases at sub-millikelvin temperatures, considerably below the typical base temperature of a dilution refrigerator. In addition, the system exhibits a new type of condensation transition that does not occur in the corresponding equilibrium scenario. As an outlook, we discuss potential applications of this cooling approach for quantum simulation schemes with interacting microwave photons. I Introduction Over the past years, superconducting quantum circuits have emerged as one of the leading platforms for quantum technologies. While the main focus in this field is currently placed on digital quantum information processing and quantum simulations applications that can be run on already commercially available hardware, superconducting circuits also offer great opportunities for analog simulation Houck et al. 2012 ; Hartmann 2016 ; Kjaergaard et al. 2020 ; Greenaway et al. 2024 . In this context, this platform benefits from the ability to implement very strong interactions Niemczyk et al. 2010 ; Forn-Díaz et al. 2016 ; Yoshihara et al. 2016 , to design custom lattice geometries Kollár et al. 2019 and long-range connectivity Zhang et al. 2023 , to engineer effective magnetic fields Roushan et al. 2017 ; Owens et al. 2018 ; Rosen et al. 2024 ; Wang et al. 2024 , and from many other control capabilities for both two-level systems and bosonic degrees of freedom. These experimental techniques provide a versatile set of tools to realize a wide range of effective quantum many-body Hamiltonians, ranging from Bose- and Fermi-Hubbard-models García-Ripoll et al. 2008 ; Koch and Le Hur 2009 ; Leib and Hartmann 2010 ; Reiner et al. 2016 ; Ma et al. 2019 ; Karamlou et al. 2024 ; Li et al. 2025 ; Du et al. 2025 and fractional quantum Hall systems Wang et al. 2024 to lattice gauge theories Marcos et al. 2013 ; Marcos et al. 2014 ; Busnaina et al. 2025 and gravity models Shi et al. 2023 ; Javed et al. 2024 . Superconducting quantum circuits can be cooled to a base temperature of T\approx 20 mK, which is enough to initialize qubits or microwave resonators—with typical transition frequencies of about \sim 3-5 GHz—in their ground state. These temperatures are, however, still large compared to the relevant energy scales of the engineered many-body models of interest, which are often determined by much weaker Josephson nonlinearities or by higher-order perturbative processes. Furthermore, simply cooling the whole microwave circuit reduces the total number of excitations in the system and thus prevents one, for example, from investigating bosonic lattice models at fixed densities. This is in stark contrast to quantum simulations schemes with cold atoms Gross and Bloch 2017 , and also differs from the case of optical photons or polaritons, where efficient, phonon-induced thermalization processes Imamog¯lu et al. 1996 ; Deng et al. 2002 ; Kasprzak et al. 2006 ; Balili et al. 2007 ; Keeling et al. 2007 ; Deng et al. 2010 ; Klaers et al. 2010 that approximately conserve the photon number are naturally available. Therefore, analog quantum simulation in superconducting circuits is usually constraint to quench dynamics or nonequilibrium steady-states in continuously driven systems, whereas—in the absence of a naturally occurring low-temperature reservoir—the preparation of ground and thermal equilibrium states remains an open problem. To overcome this deficiency—at least in part—several schemes have been put forward to stabilize many-body states with finite photon numbers. These include, for example, the preparation of a Bose-Einstein condensate (BEC) of microwave photons Marcos et al. 2012 or a photonic Mott-insulator state Ma et al. 2019 in a coupled array of transmons. These schemes are, however, designed to stabilize a specific, previously known many-body state, and are thus not immediately applicable for the preparation of more general equilibrium states that appear in quantum simulations. Alternatively, active cooling schemes and the upconversion of low temperature fluctuations have been proposed as a way to mimic effective reservoirs for microwave photons with tunable temperature and chemical potential Hafezi et al. 2015 ; Hacohen-Gourgy et al. 2015 ; Cao et al. 2025 . Similarly, iterative quantum algorithmic approaches to the cooling problem have been proposed Polla et al. 2021 ; Marti et al. 2025 , which require only partial knowledge of the many-body energy spectrum. Although such approaches are more generally applicable, a complete thermalization of photonic many-body system that are coupled to such engineered reservoirs can only be guaranteed in certain idealized limits, which may not be reachable in experiments. Any residual decay, finite cooling rates and other imperfections lead to deviations from equilibrium, which are difficult to predict in advance for generic quantum many-body systems. In this paper, we propose and analyze a simple circuit QED setup for preparing a one-dimensional gas of microwave photons close to a thermal equilibrium state with tunable temperature and a non-vanishing chemical potential. The purpose of this investigation is two-fold. Firstly, by focusing on the case of a non-interacting gas as the simplest instance of a photonic many-body system, we can accurately predict the resulting stationary distributions that arise from the competition between the engineered photon-number conserving cooling process and the thermalization with the surrounding electromagnetic environment. This allows us to characterize both equilibrium and the nonequilibrium aspects of the steady state, and to identify a meaningful, operatively-defined effective temperature to quantify cooling efficiencies in this setting. For an Ohmic environment, our analysis also reveals an unexpected feature of the steady state, namely that its total energy remains conserved. In the thermodynamic limit, this constraint induces a sharp photon-condensation transition, which does not occur in an equivalent 1D system in equilibrium. These observations can thus also provide valuable insights for other engineered many-body cooling schemes, for which an explicit evaluation of the steady-state is usually not possible. Secondly, the proposed setup shows how multi-mode cooling processes can already be implemented using a single nonlinear Josephson coupler. Compared to related previous schemes Marcos et al. 2012 ; Hafezi et al. 2015 , this reduces considerably the experimental overhead, and makes the study of such many-body cooling processes feasible in small-scale superconducting circuits with limited control. We provide a microscopic derivation of the cooling master equation starting from a realistic circuit model, and show that even with this minimal setup, a gas of thousands of microwave photons can be cooled to sub-millikelvin temperatures. We also identify some of the main limitations of this approach, which arise primarily from residual Kerr nonlinearities and must be addressed to further improve such cooling schemes in future applications. II Model Figure 1: (a) Sketch of a refrigerator for microwave photons. A

Read the complete text