Transient and periodic shear wave propagation in a solid-fluid coupled system
Aaron D’Cruz 1 and Pierre Ricco 1 · 2025
Read Transient and periodic shear wave propagation in a solid-fluid coupled system by Aaron D’Cruz 1 and Pierre Ricco 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17475.txt.
Introduction
Aaron D'Cruz and Pierre Ricco, engineers at the University of Sheffield, study what happens when a layer of fluid rests on an elastic solid that is shaken side to side. Their 2025 paper follows the motion from the first push onward, covering both the start up phase and the steady repeating pattern that follows.
Their math solution, written as series sums, tracks elastic waves bouncing inside the solid and motion dying away in the fluid. Short bursts appear each time a wave hits a boundary, while a longer settling phase reflects all the waves forming in the solid. The pair test the setup against three uses: measuring a fluid's viscosity indirectly, cutting turbulent drag, and sensing flows in living tissue.
Catalog record
| CREATOR | Aaron D’Cruz 1 and Pierre Ricco 1 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 88 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-17475
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Transient and periodic shear wave propagation in a solid-fluid coupled system Aaron D’Cruz 1 and Pierre Ricco 1 Abstract A coupled system composed of a Newtonian fluid located on a sinusoidally-forced elastic solid is studied analytically and numerically. The focus is on the transient evolution from the beginning of the forced oscillations and on the periodic behaviour established once the transient has vanished. The analytical solution is expressed as series summations that elucidate the propagation and reflections of elastic transverse waves through the solid layer and the viscous dissipation of oscillations in the fluid layer. Short-term transients in both the fluid and the solid form at every interaction between an elastic wave and a solid boundary. The long-term transient, quantified by the power balance in the fluid layer, instead pertains to the formation of all the elastic waves in the solid layer. The system can be viewed as a generalised transient Stokes layer generated by the elastic waves or as a damped resonant oscillator when the velocity at the fluid-solid interface increases significantly with respect to the amplitude. A parametric study is carried out for three applications of technological interest, i.e. the indirect measurement of fluid viscosity, the turbulent drag reduction by travelling shear waves and the sensing and manipulation of biological flows. keywords transverse waves, damped resonance, transient dynamics, Stokes layer, viscometry \titlehead Research \subject \corres Aaron D’Cruz {fmtext} 1 Introduction Shear-driven fluid systems are found in a wide range of engineering and industrial applications. Shear waves, with or without the presence of a bulk flow, may be generated by piezoelectric transducers or electro-osmosis and have been used for sensing, fluid mixing and flow control, particularly at microfluidic scales 28 . Sensing and manipulation of proteins in biochemical flows can be performed via surface acoustic waves (SAWs) with frequencies of the order of GHz, travelling in piezoelectric substrates immersed in a fluid. The interaction between molecules immobilised on the substrate and those suspended in the fluid results in a measurable modification of the SAWs and in an indirect detection of the suspended molecules 16 . On other SAW devices, standing waves have been used to transport proteins over a few millimetres 23 . Whilst other types of SAWs, such as Rayleigh waves, have also been used in biochemical flows, pure-horizontal waves are favoured due to the lack of attenuation. The strong interaction between the waves and the bulk fluid may be desirable to drive recirculation effects and favour mixing, concentration and separation in microfluidic “lab-on-a-chip” devices 31 ; 7 . Ultrasound shear waves are routinely used for laboratory and in-situ monitoring of tribological systems. As lubricating oils in industrial machines experience shear rates as high as 10^{7} \text{s}^{-1} , well beyond the range of conventional viscometers, measurements of reflected ultrasonic shear waves are used to investigate the shear rate and temperature dependence of these oils 22 ; 29 . Due to the impedance mismatch between the tested oil and the adjacent solid, a thin matching layer is sometimes used to improve sensitivity 30 ; 20 . Shear-wave methods have also been used to measure the mechanical properties of soft tissues and stresses in railroad steel 18 ; 19 . Wall-shear waves have also been utilised to alter turbulent boundary layers and achieve friction drag reduction 6 ; 27 ; 21 . The modification of wall-bounded turbulent flows by surface waves has been reported to reduce skin friction up to 45%, although the wall-shear forcing must be specified carefully to avoid drag increase 26 ; 1 ; 9 . Some of these applications involve wave transmission through multiple material layers. Mathematical studies of these engineering systems often employ empirical models fitted to experimental data or derived from analogous systems, which necessitate assumptions about the material layers and the geometry of the apparatus 24 ; 12 . Some of these models, although derived from simple definitions, become lengthy and complicated for even a few layers of different materials. Such empirical and analogous models are unlikely to be efficient for complex geometries consisting of many layers. The fundamental mathematical treatment of shear wave propagation through multiple layers is typically focused on the periodic behaviour 10 ; 32 ; 11 ; 14 . In several applications, however, the dynamics over very short timescales is of interest, particularly for real-time monitoring of machinery and for materials with long relaxation times. The initial transient response of a single shear-driven fluid layer to imposed shear wall motion has been investigated 25 , the motion eventually developing into the classical periodic “Stokes layer” 33 . More recently, the initial transient response has been studied for a system of two fluid layers with different viscosities 35 . Transient shear wave propagation through multiple solid layers is well documented 34 ; 17 , but existing transient studies of shear-driven fluids have not considered interactions with adjacent solid layers. Additionally, these studies only describe the initial transient behaviour due to the start of shear forcing, whereas in applications where the forcing is pulsed over short intervals the transient dynamics following the end of the forcing should also be considered. To the best of our knowledge, a fundamental study that considers the transient response of a coupled solid-fluid system at both the start and end of an interval of shear forcing has not yet been carried out. We therefore present an analytical and numerical investigation of a shear-driven solid layer underneath an unbounded fluid. Although our system is idealised in its geometry, the inclusion of a solid layer through which the fluid is indirectly driven renders this configuration representative of several real setups. We solve the system analytically, arriving at closed-form solutions for the transient and periodic motions of the two layers. The analytical approach leads to insight into the underlying physics that would not be possible with a purely numerical study. Since our focus is on the physics of the solid-fluid interaction and on technological applications where the viscous penetration depth is thin compared to the distance to the solid boundaries confining the fluid, we consider the fluid to be bounded by the moving boundary only. In other problems where a fluid is forced in oscillatory motion, the fluid is confined between two plates, so that no-slip boundary conditions are imposed at both solid boundaries. The solution to that confined-fluid problem would simplify to our unbounded-fluid solution in the limit of large distance between the solid boundaries 35 ; 13 . In § 2 we present the problem in mathematical form using the elastic continuum equation and the Navier-Stokes equation. In § 3 we solve the system to find closed-form solutions for the transient and periodic problems and in § 4 we solve the equations numerically to verify the accuracy of the analytical solution. In § 5 we discuss the physics that can be extracted from the analytical solution and explore the behaviour of the system for a range of experimentally inspired parameters. We also quantify the timescales over which the transient phenomena evolve into the periodic motion. 2 Mathematical formulation Figure 1: Schematic of the solid-fluid system. We consider a two-layer system described by Cartesian spatial coordinates x^{*} , y^{*} , z^{*} and time t^{*} , where ∗ denotes