Design Guidelines for Plasmon-Enhanced CsSn x Ge 1-x I 3 Perovskite LEDs: A DFT-Informed FDTD Study Journal: opticajournal Publication type: Research Article
Shoumik Debnath, 1 Sudipta Saha, 1 Khondokar Zahin, 1 Ying Yin Tsui, 2 and Md. Zahurul Islam 1,* · 2025
Read Design Guidelines for Plasmon-Enhanced CsSn x Ge 1-x I 3 Perovskite LEDs: A DFT-Informed FDTD Study Journal: opticajournal Publication type: Research Article by Shoumik Debnath, 1 Sudipta Saha, 1 Khondokar Zahin, 1 Ying Yin Tsui, 2 and Md. Zahurul Islam 1,* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17467.txt.
Introduction
Shoumik Debnath and four co-authors design a lead-free light-emitting diode on the computer before anyone builds it. The glowing layer is a perovskite mixing tin and germanium, safer than lead versions and tunable across the near-infrared. Its weak point is light trapped inside the device, and basic optical data for each mix were missing.
The team first computes those constants from quantum theory for five blends. Bandgap widens from 1.331 to 1.927 electron volts as germanium takes over. Then light-flow simulations add gold-and-glass nanorods that boost emission, reaching a 12.1-fold Purcell boost for one blend. The half-and-half blend struck the best balance, extracting 25 percent of its light. The guidelines target wearable, flexible light sources.
Catalog record
| CREATOR | Shoumik Debnath, 1 Sudipta Saha, 1 Khondokar Zahin, 1 Ying Yin Tsui, 2 and Md. Zahurul Islam 1,* |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 37 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-17467
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Design Guidelines for Plasmon-Enhanced CsSn x Ge 1-x I 3 Perovskite LEDs: A DFT-Informed FDTD Study Journal: opticajournal Publication type: Research Article Shoumik Debnath, 1 Sudipta Saha, 1 Khondokar Zahin, 1 Ying Yin Tsui, 2 and Md. Zahurul Islam 1,* Abstract CsSn x Ge 1-x I 3 as lead-free perovskites are promising for next generation NIR emitting perovskite LEDs due to their tunable bandgaps and stability. However, they suffer from poor light extraction efficiency, and accurate composition-specific optical data for these materials remain scarce. This study presents a DFT-FDTD framework to optimize light extraction via compositional tuning and plasmonic enhancement. First, DFT calculations were performed to obtain composition-specific complex refractive index and extinction coefficient values for x = 0 , 0.25 , 0.5 , 0.75 x=0,0.25,0.5,0.75 , and 1 1 . Results show bandgap increased from 1.331 eV for CsSnI 3 to 1.927 eV for CsGeI 3 with increasing Ge content, while refractive index ranges from 2.2 to 2.6 across compositions. These optical constants were then used as inputs for FDTD simulations of a PeLED structure with optimized Au/SiO 2 core-shell nanorods for plasmonic enhancement. A 12.1-fold Purcell enhancement was achieved for CsSn 0.25 Ge 0.75 I 3 , while light extraction efficiency reached 25% for CsSn 0.5 Ge 0.5 I 3 . LEE enhancement of 36% was obtained for CsSnI 3 , and spectral overlap between emitter and plasmon resonance reached 96% for Sn-rich compositions. Design guidelines indicate CsSn 0.5 Ge 0.5 I 3 offers optimal balance of extraction efficiency (25%), Purcell enhancement (5.3 × \times ), spectral overlap (93%), and oxidation stability for wearable and flexible optoelectronic applications, while CsSn 0.25 Ge 0.75 I 3 is recommended for applications prioritizing spontaneous emission rate. 1 Introduction PeLEDs have rapidly emerged as a promising candidate for next-generation light sources, including applications in displays [ 12 , 33 , 50 ] , wearable electronics, and flexible optoelectronics [ 11 , 61 ] . This rapid advancement has been made possible because of the exceptional optoelectronic properties of metal halide perovskites (MHPs), including high absorption coefficients, solution processability, and tunable emission characteristics [ 36 ] . The external quantum efficiency (EQE) of these devices has surged from less than 1% in early demonstrations [ 51 ] to over 28% for red [ 23 ] , 30% for green [ 26 ] , and 23% for blue emitters [ 43 ] . This positions PeLEDs as serious competitors to already established organic LED (OLED) technology [ 12 ] . Apart from these efficiency gains, PeLEDs offer several other distinct advantages that make them attractive for commercial usage. These advantages, combined with narrow emission linewidths (FWHM typically ¡20 nm), bandgap tunability across visible to NIR wavelengths, and low-cost solution processing [ 37 , 60 , 14 , 63 , 32 , 22 ] , position PeLEDs as strong candidates for next-generation displays and flexible optoelectronics. Although EQE has reached up to 32% [ 28 ] , the inherent toxicity of Pb is a major barrier to commercialization of these optoelectronic devices [ 26 , 34 , 65 , 9 ] . So, developing lead-free alternatives is a research priority to ensure environmental safety and sustainability [ 11 , 63 , 20 ] . Also, for commercial usage, operational lifetimes should exceed 10,000 hours and manufacturing costs should remain below USD 100 m -2 [ 66 ] . These targets are still unachieved for both lead-based and lead-free systems. This leaves significant room for innovation in both materials engineering and device architecture optimization. The search for Pb substitutes has focused on tin (Sn 2+ ) and germanium (Ge 2+ ), which share comparable ionic radii and valence states with Pb 2+ [ 34 , 20 ] . Sn-based PeLEDs have demonstrated external quantum efficiencies (EQEs) up to 20.29% with narrow emission bandwidth of 24.9 nm [ 60 ] , while Ge–Pb mixed PeLEDs have exhibited photoluminescence quantum yields (PLQYs) of nearly 71% and EQEs around 13% [ 62 ] . Sn-based MHPs exhibit excellent optoelectronic properties with direct bandgaps ranging from 1.2 eV to 1.4 eV, emitting in the near-infrared (NIR) region [ 34 ] . However, both Sn- and Ge-based MHPs suffer from oxidation-induced instability, where Sn 2+ and Ge 2+ ions readily oxidize to Sn 4+ and Ge 4+ , forming deep defects that degrade long-term performance [ 60 , 34 ] . This intrinsic chemical instability of Sn 2+ arises from its relatively low Sn 2+ /Sn 4+ redox potential, causing spontaneous oxidation in both precursor solutions and deposited thin films [ 58 ] . Partial substitution of Sn 2+ with Ge 2+ has proven particularly effective in mitigating this instability [ 1 , 24 ] . Ge alloying forms a native GeO x layer at the perovskite surface, which acts as a protective barrier against environmental factors such as moisture and oxygen [ 10 ] . CsSn 0.5 Ge 0.5 I 3 -based devices have demonstrated stable operation with less than 10% efficiency degradation over 500 hours of continuous operation [ 10 ] , representing a significant advancement in operational stability for lead-free systems. This concept, first demonstrated in perovskite photovoltaics, has led to simultaneous improvements in both power conversion efficiency and long-term stability [ 34 ] . Compositionally tuned CsSn x Ge 1-x I 3 systems therefore represent a promising alternative to lead-based perovskites for next-generation optoelectronic devices. However, the high refractive index ( \sim 2.5) of these perovskites limits the outcoupling efficiency to approximately 8% [ 12 , 48 ] . This poor outcoupling happens because the perovskite’s high refractive index traps most of the light. Studies show that nearly 80% of the generated photons never escape the device [ 69 ] . The primary reason behind it is total internal reflection at material interfaces. This alone accounts for nearly 56% of total radiative power loss [ 48 , 31 ] . So, enhancing LEE is a critical step towards realizing highly efficient lead-free PeLEDs. To model light extraction properly, we need accurate wavelength-dependent n and k values for the perovskite emitter [ 52 , 67 ] . Existing optical simulations often reuse generic or oversimplified n , k datasets resulting in substantial inaccuracies. Generic optical constants and purely geometric models cause inaccuracies in capturing the complex wave-optical behavior of light [ 15 ] . Such inaccuracies lead to spectral mismatch between the emitter’s photoluminescence and the device’s cavity modes. As a result, LEE predictions become unreliable and far-field radiation pattern characteristics become distorted [ 52 ] . First-principles density functional theory (DFT) calculations are a robust approach to counter this problem. DFT calculations determine optimized geometrical structures [ 61 ] along with accurate electronic structures and optical properties [ 27 ] . This methodology has been widely used to investigate optical and intrinsic electronic properties of MHPs [ 61 , 26 , 41 ] including Sn-based MHPs (CsSnX 3 ) [ 33 ] . This approach eliminates reliance on extrapolated or approximate n , k values. But DFT cannot model the electromagnetic interactions that govern light propagation and extraction within PeLEDs [ 48 ] . So, to find that, DFT-driven electromagnetic modeling is required. The finite-difference time-domain (FDTD)