Solution concepts for a model of visco-elasto-plasticity with slight compressibility
Thomas Eiter , · 2025
Read Solution concepts for a model of visco-elasto-plasticity with slight compressibility by Thomas Eiter , (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17464.txt.
Introduction
Thomas Eiter, a mathematician in Berlin, examines a model for how rock like material slowly deforms, in a 2025 analysis paper. The model comes from geophysics, where rock over long time scales behaves as a visco elasto plastic material: part springy, part flowing, part permanently bent. Eiter studies what should count as a solution to its equations.
The model is written in the Eulerian view, following the material's current shape rather than a fixed reference shape. Density is treated as constant, which would normally block pressure waves from traveling through the material. An added internal force, following an approach due to Temam, keeps the material slightly compressible so those waves survive. Work like this puts models used for the Earth's outer layers on firmer math ground.
Catalog record
| CREATOR | Thomas Eiter , |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 114 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-17464
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Solution concepts for a model of visco-elasto-plasticity with slight compressibility Thomas Eiter , Abstract We study a model for the deformation of a visco-elasto-plastic material that is nearly incompressible. It originates from geophysics, is given in the Eulerian description and combines a Kelvin–Voigt rheology in the spherical part with a Jeffreys-type rheology in the deviatoric part. Despite a constant density, the model allows for non-isochoric deformation and the propagation of pressure waves. An additive decomposition of the strain rate into elastic and inelastic parts leads to an evolution equation for the small elastic strain, which is coupled with an adapted momentum equation. As plasticity is modeled through a non-smooth dissipation potential, we introduce a weak formulation in terms of a variational inequality. Since the well-posedness in such a weak setting is out of reach, we study two possible modifications: the regularization in terms of stress diffusion, and the relaxation of the solvability concept by transition to energy-variational solutions. In both cases, solutions are constructed by the same time-discrete scheme, consisting of solving a saddle-point problem in each time step. MSC2020: 35A01, 35A15, 35Q35, 35Q74, 35Q86, 76A10, 74B20 Keywords: visco-elasto-plasticity, slight compressibility, non-smooth potential, energy-variational solutions, stress diffusion, saddle-point structure 1 Introduction The motion of tectonic plates due to convective processes within the Earth’s mantle is a well-accepted theory in geology. One way to describe this deformation of the Earth’s lithosphere, which happens on large time scales, is to model rock as a visco-elasto-plastic material [ 30 , 21 , 23 , 32 ] . Since there seems to be no reasonable choice for the reference configuration in this geophysical framework, a description in terms of the current configuration is natural, that is, an Eulerian description. The density varies merely on small scales, which motivates to treat it as a constant during the evolution. However, this simplification would lead to an incompressibility constraint, which does not allow the model to feature the propagation of longitudinal waves. To combine both characteristics, we follow an approach first employed by Témam [ 38 , 39 ] , and consider an additional internal force in the momentum equation. In summary, the studied model combines this setting of slight compressibility with a visco-elasto-plastic rheology. Let T>0 be a finite time horizon, and let \Omega\subset\mathbb{R}^{3} be a bounded domain. We consider the system \displaystyle\rho(\partial_{t}\boldsymbol{v}+\boldsymbol{v}\cdot\nabla\boldsymbol{v}) \displaystyle=\dv(\mathbb{S}(\boldsymbol{v})+\mathbb{T})-\frac{\rho}{2}(\dv\boldsymbol{v})\boldsymbol{v}+\bf \displaystyle\text{in }(0,T)\times\Omega, (1.1a) \displaystyle\mathbb{T} \displaystyle=D\varphi(\mathbb{E})+\varphi(\mathbb{E})\mathbb{I} \displaystyle\text{in }(0,T)\times\Omega, (1.1b) \displaystyle\mathring{\mathbb{E}}+\partial\mathcal{P}(\dev\mathbb{T}) \displaystyle\ni\mathbb{D}(\boldsymbol{v}) \displaystyle\text{in }(0,T)\times\Omega. (1.1c) The free variables are the Eulerian velocity \boldsymbol{v}\colon(0,T)\times\Omega\to\mathbb{R}^{3} and the small elastic strain \mathbb{E}\colon(0,T)\times\Omega\to\mathbb{R}^{3\times 3}_{\sym} . The mass density \rho>0 is assumed to be constant, and \bf\colon(0,T)\times\Omega\to\mathbb{R}^{3} denotes an external body force. Equation ( 1.1a ) is the momentum equation, enriched with an additional internal force \frac{\rho}{2}(\dv\boldsymbol{v})\boldsymbol{v} . The stress tensor is the sum of a linear viscous stress \mathbb{S}(\boldsymbol{v}) and a second stress tensor \mathbb{T} determined from \mathbb{E} through the stress-strain relation ( 1.1b ). Here, \varphi\colon\mathbb{R}^{3\times 3}_{\sym}\to\mathbb{R} is the potential of the stored elastic energy. Equation ( 1.1c ) thus describes a Maxwell-type rheology, which corresponds to an additive decomposition of the strain rate \mathbb{D}(\boldsymbol{v})=\frac{1}{2}(\nabla\boldsymbol{v}+\nabla\boldsymbol{v}^{\top}) , into an elastic and an inelastic part. The elastic strain rate \mathring{\mathbb{E}} is defined by the Zaremba–Jaumann rate \mathring{\mathbb{E}}=\partial_{t}\mathbb{E}+\boldsymbol{v}\cdot\nabla\mathbb{E}+\mathbb{E}\mathbb{W}(\boldsymbol{v})-\mathbb{W}(\boldsymbol{v})\mathbb{E},\qquad\mathbb{W}(\boldsymbol{v})=\frac{1}{2}(\nabla\boldsymbol{v}-\nabla\boldsymbol{v}^{\top}), while the inelastic strain rate is given by the subdifferential \partial\mathcal{P}(\dev\mathbb{T}) of a convex (dual) dissipation potential \mathcal{P} , which models viscous and plastic effects. Without loss of generality, we assume \mathcal{P}(0)=0 . As \mathcal{P} only acts on the deviatoric part of \mathbb{T} , it does not affect the volumetric strain. Therefore, the model combines a Kelvin–Voigt rheology in the volumetric part with a Jeffreys-type rheology in the deviatoric part. We refer to Section 2 for a detailed derivation of the model. We complement the system ( 1.1a )–( 1.1c ) with the boundary and initial conditions \displaystyle\boldsymbol{v} \displaystyle=0 \displaystyle\text{on }(0,T)\times\Gamma_{\mathrm{D}}, (1.1d) \displaystyle\boldsymbol{v}\cdot\boldsymbol{n} \displaystyle=0,\ [(\mathbb{T}+\mathbb{S}(\boldsymbol{v}))\boldsymbol{n}]_{\tau}=0 \displaystyle\text{on }(0,T)\times\Gamma_{\mathrm{N}}, (1.1e) \displaystyle(\boldsymbol{v},\mathbb{E})(0) \displaystyle=(\boldsymbol{v}_{0},\mathbb{E}_{0}) \displaystyle\text{in }\Omega (1.1f) for given initial data (\boldsymbol{v}_{0},\mathbb{E}_{0}) . The boundary \partial\Omega is assumed to have Lipschitz regularity, and \Gamma_{\mathrm{D}}\subset\partial\Omega and \Gamma_{\mathrm{N}}=\partial\Omega\setminus\Gamma_{\mathrm{D}} denote disjoint parts of the boundary, where we prescribe no-slip and perfect-slip boundary conditions, respectively. Here \boldsymbol{n}\colon\partial\Omega\to\mathbb{R}^{3} denotes the outer unit normal, and [\boldsymbol{a}]_{\tau} denotes the tangential part of a vector field \boldsymbol{a}\colon\partial\Omega\to\mathbb{R}^{3} , that is, [\boldsymbol{a}]_{\tau}=\boldsymbol{a}-(\boldsymbol{a}\cdot\boldsymbol{n})\boldsymbol{n} . One delicate feature of the model ( 1.1 ) is the convex potential \mathcal{P} , which is a nonlinear and non-smooth functional in general. In [ 30 , 23 , 21 , 32 ] , the visco-plastic behavior of rock is modeled by the subdifferential \partial\mathcal{P} of \mathcal{P}(\mathbb{A})=\int_{\Omega}P(\mathbb{A}(x))\,\mathrm{d}x,\qquad P(\mathbb{A})=\begin{cases}\frac{\nu}{2}|\mathbb{A}|^{2}&\text{if }|\mathbb{A}|\leq\sigma_{\mathrm{yield}},\\ +\infty&\text{if }|\mathbb{A}|>\sigma_{\mathrm{yield}},\end{cases} (1.2) for some shear viscosity \nu>0 and a yield stress \sigma_{\mathrm{yield}}>0 , which combines linear viscoelasicity for ‘small’ stresses with plastic deformation for ‘large’ stresses. As the subdifferential \partial\mathcal{P}(\dev\mathbb{T}) is multi-valued in general, equation ( 1.1c ) is indeed a differential inclusion and not a mere equality. Using the definition of the subdifferential, one can introduce a weak formulation of ( 1.1 ) in terms of a variational inequality, which intertwines the standard weak formulation with the energy inequality, see Subsect. 2.4 . Under the assumption of incompressibility and for a quadratic stored-energy functional \varphi , a similar weak formulation was used in [ 16 , 15 ] , where the existence and the weak-strong uniqueness of such solutions was shown after a regularization. The existence result was recently extended in [ 9 ] to the case of a two-phase flow. However, in all these works, weak solutions are only obtained after introduction of a diffusion term in ( 1.1c ), which increases the regularity of solutions and gives additional compactness properties useful for the existence theory. An analogous approach was applied in [ 37 ] , where a compressible visco-elastic rheology was studied. More precisely, ( 1.1b ) and ( 1.1c ) were considered for the (smooth) quadratic dissipation potential \mathcal{P}(\dev\mathbb{T})=\frac{\nu}{2}|\dev\mathbb{T}|^{2} with some shear viscosity \nu>0 , and coupled with the classical continuity and momentum equations. The existence of weak solutions was shown after introducing a viscous hyperstress in the momentum equation. This improves the regularity of the velocity field, whereby higher-order spatial regularity of the density and the elastic strain is inherited from the initial values. Therefore, the existence of weak solutions to ( 1.1 ) also seems to require a modification by the introduction of additional terms. Here we follow the idea from [ 16 , 15 , 9 ] and introduce a diffusive term in the transport-type equation ( 1.1c ). For a diffusion coefficient \gamma>0 , we consider \displaystyle\rho(\partial_{t}\boldsymbol{v}+\boldsymbol{v}\cdot\nabla\boldsymbol{v}) \displaystyle=\dv(\mathbb{S}(\boldsymbol{v})+\mathbb{T})-\frac{\rho}{2}(\dv\boldsymbol{v})\boldsymbol{v}+\bf \displaystyle\text{in }(0,T)\times\Omega, (1.3a) \displaystyle\mathbb{T} \displaystyle=D\varphi(\mathbb{E})+\varphi(\mathbb{E})\mathbb{I} \displaystyle\text{in }(0,T)\times\Omega, (1.3b) \displaystyle\mathring{\mathbb{E}}+\partial\mathcal{P}(\dev\mathbb{T}) \displaystyle=\mathbb{D}(\boldsymbol{v})+\gamma\Delta[D\varphi(\mathbb{E})] \displaystyle\text{in }(0,T)\times\Omega, (1.3c) \displaystyle\boldsymbol{v} \displaystyle=0 \displaystyle\text{on }(0,T)\times\Gamma_{\mathrm{D}}, (1.3d) \displaystyle\boldsymbol{v}\cdot\boldsymbol{n} \displaystyle=0,\ [(\mathbb{T}+\mathbb{S}(\boldsymbol{v}))\boldsymbol{n}]_{\tau}=0 \displaystyle\text{on }(0,T)\times\Gamma_{\mathrm{N}}, (1.3e) \displaystyle\boldsymbol{n}\cdot\nabla[D\varphi(\mathbb{E})] \displaystyle=0 \displaystyle\text{on }(0,T)\times\partial\Omega, (1.3f) \displaystyle(\boldsymbol{v},\mathbb{E})(0) \displaystyle=(\boldsymbol{v}_{0},\mathbb{E}_{0}) \displaystyle\text{in }\Omega. (1.3g) Then ( 1.3c ) is of parabolic type, and ( 1.3f ) are the corresponding natural boundary conditions. This regularization enables us to show the existence of weak solutions, see Theorem 3.3 below. However, to ensure convexity of the associated contribution to the dissipation, we restrict the analysis to the case of a quadratic stored elastic energy \varphi here. Then the diffusion term in ( 1.3c ) reduces to a linear term in \mathbb{E} , and \mathbb{E} appears in the energy-dissipation balance in a quadratic way, compare ( 3.3 ) below.