Solutions of the thin film equation obtained in the limit of vanishing slip
Hans Knüpfer, Juan J. L. Velázquez · 2025
Read Solutions of the thin film equation obtained in the limit of vanishing slip by Hans Knüpfer, Juan J. L. Velázquez (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17463.txt.
Introduction
Hans Knuepfer and Juan Velazquez revisit a famous paradox about how a droplet spreads on a solid. If liquid truly cannot slip at the surface, the standard equations demand infinite energy loss at the droplet's edge, which cannot be physical. Modelers soften the rule with a tiny slip, then ask what survives as that slip shrinks to zero.
The answer is richer than expected: three very different kinds of limiting solution appear. Which kind shows up depends on how the droplet's microscopic edge angle scales as slip vanishes. Some limits even show large apparent edge angles while staying consistent with the thin-film assumptions underneath. The no-slip equation, read as this limit, hides a whole family of valid behaviors.
Catalog record
| CREATOR | Hans Knüpfer, Juan J. L. Velázquez |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 63 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-17463
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Solutions of the thin film equation obtained in the limit of vanishing slip Hans Knüpfer, Juan J. L. Velázquez Abstract . We analyze the evolution of thin liquid droplets in the lubrication approximation with different slip conditions at the liquid–solid interface. Motivated by the classical no-slip paradox which states that the Navier–Stokes equations with a no-slip boundary condition require unphysical infinite dissipation during droplet spreading, we focus on the limit of vanishing slip. We show that in the no–slip limit three fundamentally different classes of limiting solutions are approached, each of them corresponding to a different scaling of the microscopic contact angle as the regularization parameter vanishes. These findings suggest that the thin-film equation with no slip supports a rich family of physically admissible solutions, provided one interprets the no–slip thin film equation as the asymptotic limit of models which regularized slip conditions. Even though the large apparent contact angles in some of these solutions seem incompatible with the lubrication approximation, a refined analysis shows that the underlying physical variables remain consistent with the assumptions for the lubrication approximation. 2020 Mathematics Subject Classification 35Q35,35K65,35C20,35B25 1. Introduction and main results 1.1. Introduction We consider the evolution of a liquid droplet on a solid substrate. In the classical fluid dynamical description, the evolution in the fluid is described by the Navier–Stokes equations, while a no slip condition is assumed at the liquid–solid interface. It has been observed that such a no–slip condition allows for droplet spreading only under the seemingly unphysical condition of infinite dissipation of energy, e.g. [ 51 ] . This apparent no slip paradox has led to many discussions about possible resolutions of this paradox. We want to discuss some related issues. As one way to avoid the no–slip paradox different relaxed slip conditions have been proposed where the tangential velocity, relative to the solid, at the interface is a function of the tangential shear stress. In particular, we consider the evolution of a thin capillary driven droplet in the so–called lubrication approximation regime. Assuming a no slip condition, in this regime the evolution of the droplet can be described by the thin–film equation (2) \displaystyle h_{t}+(h^{3}h_{xxx})_{x}\ =\ 0\qquad\qquad\text{in $\Omega\ :=\ \{h>0\}$.} Here, h is the droplet height and the continuity assumption h=0 is assumed at \partial\Omega . Assuming more general slip conditions, the lubrication approximation leads to the family of equations (3) \displaystyle h_{t}+((h^{3}+\epsilon^{3-n}h^{n})h_{xxx})_{x}\ =\ 0\qquad\qquad\text{in $\Omega\ :=\ \{h>0\}$,} The mobility exponent n\in(0,3) models the slip condition at the liquid–solid interface: n=2 represents Navier–slip where a linear slip/stress relationship is assumed, while n=1 corresponds to Greenspan’s slip condition [ 44 ] . The regularization parameter \epsilon>0 , which is assumed to be small, is called slip length (see Section 2 ). We recover the equation ( 2 ) in the limit \epsilon\to 0 . Equation ( 3 ) has to be complemented by a boundary condition at \partial\Omega . We assume the constant angle condition (4) \displaystyle h_{x}\ =\ \theta_{\epsilon}\qquad\qquad\qquad\text{at $\partial\Omega\ =\ \partial\{h>0\}$.} We note that the boundary condition ( 4 ) for ( 2 ) leads to an ill–posed problem [ 23 ] . Throughout the paper, for both equations ( 2 ) and ( 3 ) we also use the boundary condition (5) \displaystyle h^{n}h_{xxx}\ =\ 0\qquad\qquad\text{for $x\in\Omega$, $x\to\partial\Omega$.} This condition ensures that there is no loss of mass across the contact points \partial\Omega . For further references we refer e.g. to [ 29 , 51 , 49 , 24 ] , for nonlinear slip see e.g. [ 72 ] . We note that other regularizations of the no–slip paradox exist which are not considered here, see e.g. [ 62 , 74 , 61 , 53 ] . For existence of solutions for ( 2 ) we refer e.g. to [ 7 , 3 , 8 , 16 , 46 , 35 , 42 , 43 ] . The literature is discussed more in detail in the next section. More in particular, we study solutions of ( 2 ) which appear as a limit of solutions for ( 3 ) as \epsilon\to 0 . Our arguments are formal in the sense that they are based on the use of matched asymptotic expansions. For simplicity, we consider solutions with an isolated contact point s(t) at the left boundary of the support, i.e \Omega\cap B_{\delta}(s(t))=[s(t),s(t)+\delta) for some \delta>0 . We obtain the following three types of solutions of ( 2 ) and their asymptotic behaviour near the contact point: (a) The support is constant, s(t)=s_{0} . Furthermore, (6) \displaystyle h(x,t)\ \approx\ \gamma(t)\left(x-s_{0}\right)\qquad\qquad\text{ as $x\to s_{0}^{+}$}. for some smooth function \gamma(t) (see the paragraph on notation below for the meaning of the symbol “ \approx ”). We recall the well–known result that the support is constant for sufficiently regular solutions (Theorem 3.2 ). (b) The contact point s(t) is an arbitrary, monotonically increasing, prescribed smooth function (this corresponds to a shrinking droplet). The solutions have asymptotic behaviour (7) \displaystyle h(x,t)\ \approx\ (3\dot{s}(t))^{\frac{1}{3}}\left(x-s(t)\right)\Big(\ln\frac{1}{x-s(t)}\Big)^{\frac{1}{3}}\qquad\qquad\text{ as $x\to s(t)^{+}$}. (with notation \dot{s}=\frac{d}{dt}s ) We remark that the possibility of having travelling wave solutions with receding support, as the type (b) solutions was already suggested in [ 11 ] and obtained by matched asymptotics in [ 53 ] . It turns out that the same initial data allows for infinitely many solutions. (c) The interface s is also monotonically increasing and moves in a shorter time scale \tau than t, that will be denoted as \tau and the motion as s\left(\tau\right) . The mass accumulates in the moving interface s(\tau) . Therefore (with the notation s^{\prime}:=\frac{d}{d\tau}s ) (8) \displaystyle h(x,\tau)=m(\tau)\delta_{s(\tau)}(x)+h_{0}(x)\chi_{\{x>s\left(\tau\right)\}}\ \ \text{with}\ m^{\prime}(\tau)=h_{0}(s(\tau))s^{\prime}(\tau) For these solutions the interface moves so fast that the profile h_{0} does not have time to change. In this case all the mass of h_{0} that is reduced due to the reduction of the support accumulates at the interface boundary. This requires a more sophisticated analysis, see the upcoming paper [ 57 ] . The above solutions of ( 2 ) appear as limit of solutions of ( 3 ) and are related to the asymptotic behaviour of the contact angle \theta_{\epsilon} in the limit \epsilon\to 0 . In fact, a contact angle \theta_{\epsilon}\sim 1 of order corresponds to type (a) solutions. A contact angle of size \theta_{\epsilon}\gg|\ln\epsilon|^{\frac{1}{3}} leads to type (c) solutions. A contact angle in the intermediate regime \theta_{\epsilon}\approx\gamma|\ln\epsilon|^{\frac{1}{3}} leads to type (b) solutions. The contact point velocity in the intermediate regime is given by (9) \displaystyle\dot{s}\ =\ +\lim_{\epsilon\to 0}\frac{\theta_{\epsilon}^{3}}{3|\ln\epsilon|}\ =\ +\frac{\gamma}{3}\ >\ 0,\qquad\text{where $\theta_{\epsilon}\approx\gamma(-\ln\epsilon)^{\frac{1}{3}}$.} We believe that type (a) solutions also appear in the remaining case where 1\ll\theta_{\epsilon}\ll|\ln\epsilon|^{\frac{1}{3}} but this case is not treated in this paper. We also note that the limits above might only exist for a subsequence \epsilon_{k}\to 0 where the limiting angle has a well–defined behaviour. Assuming that ( 3 ) is a valid physical regularization of ( 2 ) this implies that the three types of solutions (a), (b) and (c) are physically feasible as well. Remark 1.1 (Time scales) . The evolution exhibits two time scales. In our (non–dimensionalized) model, the droplet profile h changes in {\mathcal{O}}(1) time scales, i.e. times scales of order one. The motion of the contact point, however, generally lives on a different time scale which depends