Direct demonstration of time-reversal-symmetry-breaking spin injection from a compensated magnet

Jone Mencos, Antonin Badura, Eoin Dolan, Sebastian Beckert, Rafael González-Hernández, Ismaïla Kounta, Matthieu Petit, Charles Guillemard, Anna Birk Hellenes, Warlley Campos, Javier Rial, Dominik Kriegner, Vincent Baltz, Luis E. Hueso, Jairo Sinova, Olena Gomonay, Tomáš Jungwirth, Libor Šmejkal, Lis · 2025

Read Direct demonstration of time-reversal-symmetry-breaking spin injection from a compensated magnet by Jone Mencos, Antonin Badura, Eoin Dolan, Sebastian Beckert, Rafael González-Hernández, Ismaïla Kounta, Matthieu Petit, Charles Guillemard, Anna Birk Hellenes, Warlley Campos, Javier Rial, Dominik Kriegner, Vincent Baltz, Luis E. Hueso, Jairo Sinova, Olena Gomonay, Tomáš Jungwirth, Libor Šmejkal, Lis (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-17427.txt.

Introduction

Jone Mencos and a large team give the first direct proof that a magnet with no net magnetization can still inject a spin current in a one-way, time-breaking fashion. Their injector is a film of Mn5Si3, a compensated magnet whose internal poles cancel out. In a sideways spin valve, flipping the magnet between its two time-reversed states changed the detected spin signal, the key fingerprint.

The effect showed up under both wiring setups they tried, with the same detector. Calculations tie it to the material's altermagnetic order, which sends spin-up and spin-down currents along at different strengths and angles. A magnet that looks inert from outside yet steers spin inside could shrink future memory and logic devices.

Catalog record

CREATORJone Mencos, Antonin Badura, Eoin Dolan, Sebastian Beckert, Rafael González-Hernández, Ismaïla Kounta, Matthieu Petit, Charles Guillemard, Anna Birk Hellenes, Warlley Campos, Javier Rial, Dominik Kriegner, Vincent Baltz, Luis E. Hueso, Jairo Sinova, Olena Gomonay, Tomáš Jungwirth, Libor Šmejkal, Lis
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE37 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-17427

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Direct demonstration of time-reversal-symmetry-breaking spin injection from a compensated magnet Jone Mencos, Antonin Badura, Eoin Dolan, Sebastian Beckert, Rafael González-Hernández, Ismaïla Kounta, Matthieu Petit, Charles Guillemard, Anna Birk Hellenes, Warlley Campos, Javier Rial, Dominik Kriegner, Vincent Baltz, Luis E. Hueso, Jairo Sinova, Olena Gomonay, Tomáš Jungwirth, Libor Šmejkal, Lisa Michez, Helena Reichlova, Fèlix Casanova Abstract The injection, propagation and detection of spin currents are essential physical processes in spintronics. So far, the separation of charge and spin currents was facilitated by a direct exploration of the electrical spin injection from a ferromagnet johnson_interfacial_1985 ; jedema_electrical_2001 ; jedema_spin_2003 ; tombros_electronic_2007 ; lou_electrical_2007 ; casanova_control_2009 ; hamaya_estimation_2012 ; zahnd_spin_2018 ; fukuma_giant_2011 ; Kaiser2024 or the injection by a relativistic spin Hall effect sagasta_tuning_2016 ; morota_indication_2011 ; laczkowski_large_2017 ; omori_relation_2019 ; m_cosset-cheneau_electrical_2022 . The devices employed are lateral spin valves comprising spatially well-separated injection and detection electrodes, connected by a spin-propagation channel. The time-reversal ( \cal T ) symmetry-breaking ferromagnetic spin injection is realized in an experimental geometry with an electrical bias applied between the injection electrode and the channel, and is modeled by a conserved spin-polarized drift current generated along the applied bias johnson_interfacial_1985 ; jedema_electrical_2001 . In contrast, the spin injection by the \cal T -symmetric relativistic spin Hall mechanism is driven by an electrical bias applied across the injection electrode alone, and is modeled by a non-conserved spin current transverse to the applied bias Sinova2015 . In this work, we use a lateral spin valve with a Mn 5 Si 3 injection electrode to directly demonstrate a \cal T -symmetry-breaking spin injection from a compensated magnet with a vanishing net magnetization. Specifically, the \cal T -symmetry breaking is demonstrated by the fact that switching between time-reversed states of the compensated magnet changes the detected spin signal. Moreover, the \cal T -symmetry-breaking nature of the spin injection is observed in both experimental geometries with the different electrical biasing, while using the same detection electrode. We show that this unconventional spin-injection phenomenology is consistent with different magnitudes and propagation angles of electrical currents in the spin-up and spin-down channel in a d-wave altermagnet. Gonzalez-Hernandez2021 ; smejkal_giant_2022 ; Smejkal2021a ; Smejkal2022a ; Jungwirth2025b Here our symmetry analysis and first-principles calculations are based on the compensated collinear altermagnetic order which has provided a comprehensive microscopic interpretation of earlier structural, magnetic, and anomalous Hall and Nernst measurements in Mn 5 Si 3 thin films Reichlova2024 ; kounta_competitive_2023 ; Badura2025 . It is now theoretically and experimentally established that some compensated magnets with a vanishing net magnetization can generate \cal T -symmetry-breaking responses that were traditionally considered to be the exclusive domain of ferromagnetic spintronics Smejkal2022AHEReview ; Smejkal2022a ; Nakatsuji2022 ; Rimmler2024 ; gonzalez_betancourt_spontaneous_2023 ; Jungwirth2025b . The \cal T -symmetry-breaking responses in the compensated magnets open the prospect of future spintronic technologies whose energy efficiency, speed and scalability is not limited by magnetization Smejkal2022AHEReview ; Smejkal2022a ; Nakatsuji2022 ; Rimmler2024 ; Han2025 ; Jungwirth2025b . To enable the \cal T -symmetry-breaking linear responses, the compensated magnetic ordering on the crystal has to break symmetries combining \cal T with translation and \cal T with inversion. These broken symmetries can occur in some non-collinear compensated magnets, and are among the defining symmetry signatures of the collinear compensated altermagnetic phase. For the non-collinear magnetic orders, the resulting spin-polarized spectra tend to feature mixed spin-up and spin-down electronic states, reminiscent of a strong relativistic spin-orbit coupling Zelezny2017a ; Smejkal2022AHEReview . In contrast, the collinear altermagnets feature spin-up and spin-down transport channels which can be well separated and conserved Smejkal2021a ; Smejkal2022a , as in conventional ferromagnets used in current spintronic technologies Chappert2007 ; Worledge2022 ; IRDS2023 . Research of \cal T -symmetry-breaking phenomena in compensated magnets has so far focused on local responses. These include the counterparts of the ferromagnetic anomalous Hall (AHE) and anomalous Nernst (ANE) effects, measured in a thin-film cross-bar structure of the studied magnet, or the giant (tunneling) magnetoresistance, detected in a vertical stack with magnetic electrodes separated by a nanoscale non-magnetic conductive (insulating) spacer Nakatsuji2015 ; Betancourt2021 ; Chen2023 ; Qin2023 ; ikhlas_large_2017 . In our work, we present a direct experimental observation of a \cal T -symmetry-breaking spin injection from a compensated magnet by employing a non-local detection scheme in a lateral spin valve. The observed spin-injection phenomenology is unparalleled in the earlier explored ferromagnetic and relativistic spin-injection mechanisms, as outlined in Fig. 1. In the top row, we depict the two electrical biasing geometries that can be used for spin injection in lateral spin valves. Spin injection in the first biasing geometry due to a spin-polarized longitudinal drift current (left cartoon) has been demonstrated in ferromagnetic materials johnson_interfacial_1985 ; jedema_electrical_2001 ; jedema_spin_2003 ; tombros_electronic_2007 ; lou_electrical_2007 ; casanova_control_2009 ; hamaya_estimation_2012 ; zahnd_spin_2018 ; fukuma_giant_2011 ; Kaiser2024 , where the breaking of \cal{T} -symmetry originates from the net magnetization. In the second biasing geometry (right cartoon), the spin injection relies on \cal{T} -symmetric relativistic spin–orbit coupling effects, namely the transverse spin Hall current, and has been observed using both ferromagnetic omori_relation_2019 ; m_cosset-cheneau_electrical_2022 and non-magnetic heavy-metal injection electrodes sagasta_tuning_2016 ; morota_indication_2011 ; laczkowski_large_2017 . The spin accumulation generated in a non-magnetic channel in both geometries diffuses away as a spin current and is non-locally detected as a voltage signal by a ferromagnetic electrode which depends on the relative orientation between its magnetization and the polarization direction of the diffusing spin current. In this work, using lateral spin valves, we demonstrate a principally distinct form of spin injection. Our injection electrode is fabricated from a compensated magnet with a vanishing net magnetization, and yet we observe a \cal{T} -symmetry-breaking spin injection. Moreover, the \cal{T} -symmetry-breaking nature is revealed in both geometries of the lateral spin valve. Figure 1: Spin-injection mechanisms and direct detection in a lateral spin valve. Top row: A lateral spin valve comprising injection and detection electrodes connected by a transverse channel. An applied electrical bias ( \textit{I}_{\text{bias}} ) injects spins into the channel, which then diffuse towards the detection electrode, generating a non-local voltage, \textit{V}_{\text{NL}} . The left and right schematics illustrate the first and the second electrical biasing geometry in which the respective spin-injection mechanisms were directly observed. Second row: \cal{T} -symmetric relativistic spin injection from a non-magnetic electrode, arising form a transverse spin-Hall current, in the second biasing geometry. In the first biasing geometry, spin injection from a non-magnetic electrode is not observed. Third row: \cal{T} -symmetry-breaking spin injection in the first biasing geometry, originating from the finite magnetization of a ferromagnet ( M\neq 0 ), which generates a spin-polarized longitudinal current. In the second biasing geometry, the spin injection is due to the \cal{T} -symmetric spin Hall effect as in the non-magnetic electrode. Bottom row: In this work, we demonstrate \cal{T} -symmetry-breaking spin injection from a compensated magnet ( M=0 ), independent of the biasing geometry. Our 18-nm-thick \text{Mn}_{5}\text{Si}_{3} film was grown by molecular beam epitaxy (MBE) on a Si(111) substrate, and the high crystallinity of the epilayer was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) Reichlova2024 ; kounta_competitive_2023 (see also Methods and Supplementary Fig. S1). A 200-nm-wide injection electrode was patterned along the a -axis of \text{Mn}_{5}\text{Si}_{3} (y-direction), as shown in Fig. 2a. A

Read the complete text