Fabrication Optimization of Suspended Stencil Mask Lithography for Multi-Terminal Josephson Junctions
Justus Teller, Abdur Rehman Jalil, Florian Lentz, Detlev Grützmacher, Thomas Schäpers · 2025
Read Fabrication Optimization of Suspended Stencil Mask Lithography for Multi-Terminal Josephson Junctions by Justus Teller, Abdur Rehman Jalil, Florian Lentz, Detlev Grützmacher, Thomas Schäpers (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-16690.txt.
Introduction
Justus Teller and coauthors report how to best make stencil masks for Josephson junctions, devices at the heart of superconducting circuits. Stencil lithography builds the junctions in place, in vacuum, and is now used for junctions with many terminals.
The team made and checked 270 mask designs under a scanning electron microscope. They report yield, the smallest safe sizes, and how results shift as terminal count grows. The verdict is that the method is reliable for multi-terminal junctions, with side sizes down to about 40 nanometers on average. The data give builders concrete design rules for a method with few other guides.
Catalog record
| CREATOR | Justus Teller, Abdur Rehman Jalil, Florian Lentz, Detlev Grützmacher, Thomas Schäpers |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-16690
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Fabrication Optimization of Suspended Stencil Mask Lithography for Multi-Terminal Josephson Junctions Preprint: AIP/123-QED Justus Teller, Abdur Rehman Jalil, Florian Lentz, Detlev Grützmacher, Thomas Schäpers Abstract Stencil mask lithography is an advanced technique for fully in-situ fabricating Josephson junctions, which is increasingly being used for multi-terminal Josephson junctions. This study provides information on the optimal mask design and mask reliability. For this, 270 mask designs were systematically fabricated and investigated under scanning electron microscope. Reliable statements are made about mask yield, minimal dimensions, and systematic dependencies on the number of superconducting terminals. We find that stencil mask lithography can be used reliably for fabricating multi-terminal Josephson junctions, enabling lateral mask dimensions down to 40 nm on average. I Introduction Stencil mask lithography has a rich history dating back to 1969. Alix 1969 ; Vazquez-Mena et al. 2015 In contrast to resist patterning, stencil masks can be kept at a distance from the substrate, moved during processing, and used multiple times, since they are mechanically stable and self-supporting. Vazquez-Mena et al. 2015 Moreover, the technique is scalable and applied across several fields. Du et al. 2017 Recent developments include the fabrication of complex 3-dimensional (3D) surfaces and self-aligned superlattices, Zeng et al. 2025 a plasmonic metasurface of 3D inclined structures, Jeong et al. 2024 next-generation biochemical sensors, Ali et al. 2024 strechable conductors, Sun, Boero, and Brugger 2021 and transmon qubits. Tsioutsios et al. 2020 In 2019, Schüffelgen et al. Schüffelgen et al. 2019 introduced stencil mask lithography for the fabrication of Josephson junctions with normal-conducting weak link. The advantage of this in situ fabrication technique is that all material layers can be deposited by molecular beam epitaxy (MBE) or electron beam evaporation without breaking the ultra-high vacuum. Consequently, the material interfaces are exceptionally clean, free of residual interface atoms or oxidation. In a superconductor-normal conductor-superconductor (SNS) junction, the Josephson supercurrent flows between two closely spaced superconducting electrodes bridged by the normal-conducting weak-link material. The smaller the separation, the larger the superconducting coupling. Using a stencil mask to deposit the superconducting material the distance between the superconducting electrodes is defined by the width of the mask. The stencil mask technique can be used to fabricate any kind of SNS weak link Josephson junction, comprising different weak link materials, such as metals, semiconductors or topological materials. Over the last years, a broad range of research studies has been published using this fabrication technique, including two-terminal Josephson junctions, Schüffelgen et al. 2019 ; Schmitt et al. 2022a ; Schmitt et al. 2022b ; Rosenbach et al. 2023 ; Zimmermann et al. 2024 ; Hanna et al. 2025 ; Jalil et al. 2025 three-terminal Josephson junctions, Kölzer et al. 2023 ; Behner et al. 2025 and whole networks of Josephson junctions. Teller et al. 2025a Figure 1: a) Visualisation of a suspended stencil mask for a three-terminal junction with normal conducting material (N) deposited underneath. The mask itself is made of three pillars (SiO 2 ) holding up the top Si 3 N 4 . b) Deposited Nb on top of the mask. The mask casts a shadow onto the underlying Si substrate. Therefore, the geometry of the mask is directly connected to the resulting device geometry on the substrate. c) Finished three-terminal junction after mask removal and subsequent etching step to separate the superconducting electrodes, revealing the Si substrate. Figure 2: Fabricated masks and determination of mask dimensions. a) Scanning electron microscopy image of a fabricated design cell containing three rows for two-, three-, and four-terminal masks, respectively. The arm width was set for each design cell (here aw=300\, nm) and the center width was increased from left (10 nm) to right (100 nm) in 10-nm-steps. Broken (left) and intact (right) stencil masks were easily identifiable under SEM. The red-marked masks were broken and the green-marked masks were intact for this particular design cell. b)-d) In total masks for two-, three-, and four- terminal Josephson junctions were investigated. The images correspond to the masks in a) and their respective frame color equals that of the data, which are presented throughout the study, for the corresponding number of arms. e) Geometry of a three-terminal junction and design parameters used in this study: center width ( cw ), center length ( cl ), arm width ( aw ). Together, they define the angle of sharpness ( \alpha ). f) An exemplary center width measurement of the mask in c) under SEM using a line scan. The position of the line scan is indicated in the SEM image on the right as a white line. In this particular example, the center width was determined to be cw=66\, nm. Information on determining the threshold value (red line) is given in Supplemental Material. In general, more complex Josephson junctions, i.e., multi-terminal junctions, have attracted increasing attention recently. Pfeffer et al. 2014 ; Riwar et al. 2016 ; Draelos et al. 2019 ; Graziano et al. 2020 ; Pankratova et al. 2020 ; Coraiola et al. 2023 ; Coraiola et al. 2024 They are defined as a Josephson junction with more than two superconducting contacts that all share the same weak link. Duhot, Lefloch, and Houzet 2009 ; Riwar et al. 2016 ; Pankratova et al. 2020 For multi-terminal Josephson junctions one can distinguish between two model descriptions: In the frist model, all superconducting weak link channels meet at a central scattering region in the middle Duhot, Lefloch, and Houzet 2009 ; Riwar et al. 2016 ; Pankratova et al. 2020 ; Graziano et al. 2022 ; Coraiola et al. 2023 ; Matute-Cañadas, Tosi, and Yeyati 2024 (central scattering transport model) and, in the second model, each superconducting contact pairwise shares transport channels with a neighbouring one in a network. Draelos et al. 2019 ; Graziano et al. 2020 ; Arnault et al. 2021 ; Arnault et al. 2022 The latter can be described by a resistively and capacitively shunted junction (RCSJ) network using Kirchhoff’s circuit laws. Graziano et al. 2020 ; Arnault et al. 2022 The central scattering model is of great interest because it allows direct coupling of multiple electrodes, thereby enabling novel device functionalities. Matute-Cañadas, Tosi, and Yeyati 2024 Furthermore, it is predicted that artificial topological states can be created, e.g. topological Weyl singularities. Riwar et al. 2016 ; Peralta Gavensky, Usaj, and Balseiro 2023 However, achieving the central scattering region model poses particular challenges for the junction geometry, i.e. all electrodes should be as close as possible in the center part of the device. This study systematically investigates the optimal geometric fabrication parameters for stencil masks of two-, three-, and four-terminal Josephson junctions. Figure 1 a) illustrates the layout of a stencil mask for a three-terminal Josephson junction. The suspended Si 3 N 4 mask rests on three SiO 2 pillars. The weak-link material of the junction, e.g., a metal, semiconductor, or topological material, is present under the bridge. One way to define the weak-link geometry in situ is to employ selective-area growth, as described by Schüffelgen et al. Schüffelgen et al. 2019 When the superconductor layer is deposited at a fixed angle from above, it casts a shadow corresponding to the mask layout [cf. Fig. 1 b)]. This defines the separation of the superconducting electrodes.