A Square Kilometre Array Pulsar Census
E. F. Keane 1, V. Graber 2, L. Levin 3, C. M. Tan 4, O. A. Johnson 1, C. Ng 5, C. Pardo-Araujo 6,7, M. Ronchi 8, D. Vohl 8, M. Xue 9, The SKA Pulsar Science Working Group · 2025
Read A Square Kilometre Array Pulsar Census by E. F. Keane 1, V. Graber 2, L. Levin 3, C. M. Tan 4, O. A. Johnson 1, C. Ng 5, C. Pardo-Araujo 6,7, M. Ronchi 8, D. Vohl 8, M. Xue 9, The SKA Pulsar Science Working Group (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-16153.txt.
Introduction
E F Keane and a large SKA team plan a sky census in their 2025 paper on arXiv. Before astronomers can time pulsars precisely or locate them with linked telescopes, they must first find them. The authors lay out how to run an all-sky blind pulsar survey with the Square Kilometre Array.
They weigh the known pulsar population, the performance of the SKA parts now under construction, and practical limits like radio interference. Their best plan mixes both telescopes: SKA1-Low sweeps as much sky as possible, while SKA1-Mid focuses near the galactic plane. In their most realistic scenario, phase one finds about 10,000 ordinary pulsars and about 800 millisecond pulsars. A larger final array raises the yield by about 20 percent. The census would sharpen knowledge of the whole neutron star population.
Catalog record
| CREATOR | E. F. Keane 1, V. Graber 2, L. Levin 3, C. M. Tan 4, O. A. Johnson 1, C. Ng 5, C. Pardo-Araujo 6,7, M. Ronchi 8, D. Vohl 8, M. Xue 9, The SKA Pulsar Science Working Group |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 57 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-16153
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Square Kilometre Array Pulsar Census E. F. Keane 1, V. Graber 2, L. Levin 3, C. M. Tan 4, O. A. Johnson 1, C. Ng 5, C. Pardo-Araujo 6,7, M. Ronchi 8, D. Vohl 8, M. Xue 9, The SKA Pulsar Science Working Group Abstract Most of the pulsar science case with the Square Kilometre Array (SKA) depends on long-term precision pulsar timing of a large number of pulsars, as well as astrometric measurements of these using very long baseline interferometry (VLBI). But before we can time them, or VLBI them, we must first find them. Here, we describe the considerations and strategies one needs to account for when planning an all-sky blind pulsar survey using the SKA. Based on our understanding of the pulsar population, the performance of the now-under-construction SKA elements, and practical constraints such as evading radio frequency interference, we project pulsar survey yields using two complementary methods for a number of illustrative survey designs, combining SKA1-Low and SKA1-Mid Bands 1 and 2 in a variety of ways. A composite survey using both Mid and Low is optimal, with Mid Band 2 focused in the plane. We find that, given its much higher effective area and survey speed, the best strategy is to use SKA1-Low to cover as much sky as possible, ideally also overlapping with the areas covered by Mid. In our most realistic scenario, we find that an all-sky blind survey with Phase 1 of the SKA with the AA* array assembly will detect ∼ 10,000 \sim 10,000 slow pulsars and ∼ 800 \sim 800 millisecond pulsars (MSPs) if SKA1-Mid covers the region within 5 deg 5\deg of the plane, while higher latitudes will be covered with SKA1-Low. The yield with AA4 is ∼ 20 % \sim 20\% higher. One could increase these numbers by increasing the range covered by SKA1-Mid Bands 1 and 2, at the cost of a considerably longer survey. The pulsar census will enable us to set new constraints on the uncertain physical properties of the entire neutron star population. This will be crucial for addressing major SKA science questions including the dense-matter equation of state, strong-field gravity tests, and gravitational wave astronomy. 1 Introduction Pulsar science is one of the foremost drivers for the Square Kilometre Array (SKA) Observatory ( 11 ) . The possibilities in pulsar science highlighted in the 2015 SKA Science Case ( 52 ) have, in the intervening decade, motivated the design of many components of the SKA, which is now under construction in South Africa and Australia. In this paper, we revise our earlier estimates ( 41 ; 53 ) for the number of pulsars detectable by SKA Phase 1 (hereafter SKA1) using a variety of blind pulsar survey approaches. Updated estimates are timely for a number of reasons. Firstly, immediately after the publication of our 2015 estimates, SKA1 was ‘re-baselined’; the effect was a nominal loss of 50\% and 30\% in collecting area for SKA1-Low and Mid, respectively. In addition to this, the design went from incompatible ‘desirements’ of diverse user groups, to a rigorously tested set of requirements determined via a systems engineering approach ( 13 ) . Many additional design choices and optimisations have occurred in the last decade. As well as the parameters of the SKA changing, our understanding of the pulsar population has improved in many ways, often driven by new discoveries and measurements performed by SKA precursor and pathfinder instruments. Here, we factor in these changes to re-estimate what the pulsar survey yield might be from SKA1 using a two-pronged approach, discuss underlying challenges in deriving these estimates and highlight key areas that we need to address to advance our pulsar science cases. Below, in § 2 , we describe our two population synthesis analyses, both the snapshot and evolutionary approaches. This is followed in § 3 by our analysis of the sensitivity and survey speed of both the Mid and Low arrays. As subsets of the full arrays can be combined, in what is termed a ‘sub-array’, there are a number of sensitivity and field-of-view combinations possible so our analysis is performed as a function of increasing sub-array size. With our calculated and chosen survey parameters, we then present our population synthesis results and our expected survey yields when employing each of three options for composite surveys using Low, Mid Band 1 and Mid Band 2 in tandem in different ways. Finally in § 5 , we discuss our estimates, and the magnitude and reasons for systematic uncertainties in these. We conclude with a ‘wish list’ of activities that can already be undertaken to improve pulsar population modeling and survey yield estimates. 2 Population Synthesis Pulsar population synthesis is an attempt to determine the intrinsic underlying population of pulsars in the Galaxy ( 25 ; 55 ; 47 ; 30 ; 37 ) , along with their key properties, based on the known observed population and our understanding of observational selection effects and other biases, as well as on our theoretical understanding of neutron star astrophysics which cannot be derived from the observations alone. Population synthesis can be undertaken in a number of ways. Here, we perform the modeling in two ways, firstly using a ‘snapshot’ approach ( 55 ; 6 ) and secondly using an evolutionary method ( 28 ; 72 ) . While the former method models the Galactic pulsar population based on currently observed properties, the latter evolves pulsars based on a set of initial conditions to reach the current population. Subsequent observational filters applied (see § 3 ) are, however, identical. 2.1 Snapshot The snapshot pulsar population synthesis was undertaken using psrpoppy ( 6 ) , which is a translated and expanded version of its predecessor psrpop ( 55 ) . This population synthesis approach tries to reproduce the current observed distributions of pulsar properties, and with this achieved, the resulting population can be used to make predictions for any given survey parameters. We first updated the software 1 1 1 https://github.com/evanocathain/PsrPopPy3 to correct a number of issues with inconsistent survey parameters. The most substantive change is an update to the signal-to-noise ratio calculation. Pulsars are predominantly found via Fourier-domain methods. As such, we included the duty cycle-dependent efficiency factor determined by 66 as appropriate for incoherent searches based on Fast Fourier Transforms. Figure 1 shows this correction factor. The overall effect is to suppress narrow duty cycle pulsar signals. As the duty cycles in the long-period (hereafter ‘slow’) pulsar population are typically narrow in general, whereas those of the faster spinning millisecond pulsar population are wider, the deleterious effect is more pronounced in the slow pulsar population. Figure 1: Shown is the FFT correction factor as a function of duty cycle, as determined by 66 ; this is the response when 32 harmonics are summed. The efficiency is relative to perfectly phase-coherent signal-to-noise estimates, which the fast folding algorithm ( 67 ) gets closer to. As a result of these changes, and the slight increase in pulsar detections in surveys previously considered to be complete, we re-performed the analysis of 7 to determine the spectral index distribution that is consistent with three archival Parkes surveys. These were namely the Parkes Southern