A Characterization of JWST MIRI Detector Persistence & Implications for High-Contrast Imaging Facilities: J edmcmc.py ( 27 ) , astro.py ( 4 ; 2 ; 3 ) , numpy.py ( 26 ) , SAOImage DS9 ( 23 )
Alisha Vasan, Mary Anne Limbach, Andrew Vanderburg, Rachel Bowens-Rubin, Kevin B. Stevenson · 2025
Read A Characterization of JWST MIRI Detector Persistence & Implications for High-Contrast Imaging Facilities: J edmcmc.py ( 27 ) , astro.py ( 4 ; 2 ; 3 ) , numpy.py ( 26 ) , SAOImage DS9 ( 23 ) by Alisha Vasan, Mary Anne Limbach, Andrew Vanderburg, Rachel Bowens-Rubin, Kevin B. Stevenson (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-15477.txt.
Introduction
Alisha Vasan and co authors characterize a persistence effect in the JWST MIRI detector in a 2025 paper. Persistence means a bright source leaves a lingering imprint on later images. For MIRI it appears as a flux deficit, a faint dark ghost, and it was poorly measured at the longest wavelengths.
The team studies full field images at 21 microns after a bright nearby star saturated the detector. They measure a persistence level of 1.69 percent shortly after saturation, and model its decay over hours. The paper then warns that such ghosts can mimic exoplanets or spoil background subtraction in direct imaging, and it outlines ways to avoid those traps.
Catalog record
| CREATOR | Alisha Vasan, Mary Anne Limbach, Andrew Vanderburg, Rachel Bowens-Rubin, Kevin B. Stevenson |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-15477
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Characterization of JWST MIRI Detector Persistence & Implications for High-Contrast Imaging Facilities: J edmcmc.py ( 27 ) , astro.py ( 4 ; 2 ; 3 ) , numpy.py ( 26 ) , SAOImage DS9 ( 23 ) Alisha Vasan, Mary Anne Limbach, Andrew Vanderburg, Rachel Bowens-Rubin, Kevin B. Stevenson Abstract The JWST MIRI detector exhibits a flux deficit persistence, but its timescales and impacts remain largely uncharacterized, particularly at the longest imaging wavelengths. In this study, we analyze full-field MIRI imager observations at 21 μ \mu m (F2100W) to quantify detector persistence following a saturation event by a bright (K = 5.65 mag) nearby (8.12 ± \pm 0.04 pc) mid M-dwarf star, IRAS 21500+5903. Unlike typical persistence that appears as excess flux, this effect presents as a flux deficit in pixels previously illuminated by the saturating or near saturating source. We measure persistence at two post-saturation epochs: shortly after saturation (11.6 minutes) and an hour later (1.39 hours). Immediately after the saturation event, we detect a persistence level of 1.69 ± 0.10 1.69\pm 0.10 %. By fitting a Bayesian exponential decay model to the two epochs, we estimate that persistence decreases to one-tenth of its initial value after 5.16 − 0.94 + 1.49 5.16^{+1.49}_{-0.94} hours. We examine the implications of persistence for MIRI high-contrast imaging using the imager (not coronagraphy). Specifically, we discuss how MIRI detector persistence can produce false-positive exoplanet signals in direct imaging surveys, as well as degrade PSF subtraction, particularly at small inner working angles. We also outline mitigation strategies to avoid these impacts in future observations. I Introduction As JWST enters full science operations, understanding the behavior and performance of its instruments is essential for optimizing data quality and scientific return. The Mid-Infrared Instrument (MIRI) imager ( 30 ) on JWST is enabling groundbreaking observations of galaxies ( 11 ; 15 ) , debris disks ( 13 ) , exoplanets ( 20 ; 17 ) , and star forming regions ( 14 ) with its unprecedented mid-infrared sensitivity. With these powerful capabilities, however, come subtle instrumental effects that must be carefully characterized, especially as MIRI is used to make increasingly precise and sensitive measurements. One of the challenges is that the MIRI detector exhibits a known issue called persistence 1 1 1 https://jwst-docs.stsci.edu/jwst-mid-infrared-instrument/miri-instrumentation/miri-detector-overview/miri-detector-performance . Persistence is an artifact common in infrared detectors that can introduce false structures into images, bias photometric measurements, contaminate faint source photometry, and degrade PSF subtraction performance, particularly in sequences where both bright and faint targets are observed together or in close succession. It is important to distinguish between different types of persistence effects. Most detector persistence presents as excess flux where charge from a bright source is retained in the detector and released slowly over time, creating residual signals in subsequent exposures ( 25 ) . However, MIRI exhibits a less common form of persistence, where very bright sources create a negative offset in the pixels they have illuminated, resulting in a flux deficit rather than the more typical persistence excess ( 22 ; 21 ) . The physical mechanism underlying this flux-deficit persistence is not yet fully understood, but it appears to be linked specifically to near or hard detector saturation events. While previous studies have found persistence effects to be minimal in some of MIRI’s shorter-wavelength imaging bands ( 19 ; 10 , \lambda<12.8\,\mu m;) , the impact on faint sources in the context of high-contrast imaging, especially where both faint and bright sources coexist in the image, has not been well characterized. Furthermore, little is known about persistence behavior in MIRI’s longest ( >18\mu m) imaging wavelengths, including the F1800W, F2100W and F2550W filters, where flux-deficit persistence signals appear more prominent and likely to contaminate measurements. In this paper, we measure the persistence decay timescale in the MIRI F2100W filter by analyzing imaging observations of the bright star IRAS 21500+5903, taken minutes to hours after a saturation event. We use two datasets obtained at different time intervals following saturation to quantify the decay of the residual persistence signal. These results provide empirical constraints on how long persistence remains detectable, offering practical guidance for planning MIRI observations and mitigating persistence-related artifacts in future science programs. The layout of this paper is as follows. Section II describes the data used. Section III outlines our analysis approach and presents the measured MIRI F2100W persistence decay rate. In Section IV , we discuss how persistence on the MIRI imager impacts high-contrast imaging and explore mitigation strategies. Finally, Section V summarizes our findings. II Observations Figure 1: Saturation event occurs when imaging WD 2151+591 in the F770W band (left). Sequential dither position images with MIRI at F2100W of WD 2151+591 ( middle) and WD 1748+708 (right) illustrate the flux-deficit persistence caused by saturation from the bright M-dwarf IRAS 21500+5903 in the WD 2151+591 field. This source saturated the detector most severely in 7.7 \mu m (F770W; left) imaging taken 12 minutes prior to the imaging sequence on the middle and 1.39 hours prior to the sequence on the right. The flux-deficit residual trace from the M-dwarf is visible between dither positions as it moves across the MIRI detector. Dither pattern used for this observation was cycling with dither points 1-4 (top to bottom). Table 1: Relevant information concerning observations. Target Obs no. Filter Dithers Total time [s] WD 2151 9 F770W 4 55.5 WD 2151 9 F1800W 4 710.412 WD 2151 9 F2100W 4 277.504 WD 1748 3 F770W 4 55.5 WD 1748 3 F1800W 4 710.412 WD 1748 3 F2100W 4 277.504 . Note. — The specific observations analyzed can be accessed via https://doi.org/10.17909/cjkx-kp07 (catalog doi: 10.17909/cjkx-kp07) Our study uses data from the JWST Cycle 2 survey program #4403 ( 16 ; 18 ) . This survey collected 7.7, 18.0, and 21.0 \mu m MIRI imaging on about 20 nearby white dwarfs. One of the white dwarfs imaged in this survey, WD 2151+591, had a bright main sequence companion, IRAS 21500+5903, which saturated the detector. IRAS 21500+5903 is located at a distance of 8.12 ± 0.04 parsecs based on a Gaia DR2 parallax measurement of 123.06 ± 0.59 milliarcseconds ( 12 ) . The star is an M4V dwarf companion, has a K-band magnitude of 5.65, and a WISE band W4 (22 \mu m) magnitude of 5.14. The imaging sequence progressed from the shortest (7.7 \mu m) to the longest (21.0 \mu m) wavelength. Saturation was most severe in the initial 7.7 \mu m image, leading to significant persistence in the 21.0 \mu m images taken 11.6 minutes later. This persistence was still present 1.39 hours later in a white dwarf system (WD 1748+708), which was imaged with MIRI using the same sequence as part of this survey program. At the start of our analysis in mid-2024, we also searched the MAST archive for additional datasets exhibiting significant persistence in the F2100W and F2550W bands that could be used to characterize MIRI imager persistence at the longest wavelengths. However, we did not identify any suitable datasets beyond the imaging set analyzed in this study. WD 2151+591 and WD 1748+708 were observed on September 20, 2023. The 21 \mu m imaging observations took place 1.39 hours apart and used the fast readout