Modelling the Impact of Device Imperfections on Electron Shuttling in SiMOS devices.
Jack J. Turner, Christian W. Binder, Guido Burkard, Andrew J. Fisher · 2025
Read Modelling the Impact of Device Imperfections on Electron Shuttling in SiMOS devices. by Jack J. Turner, Christian W. Binder, Guido Burkard, Andrew J. Fisher (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-03853.txt.
Introduction
Shuttling single electrons along a silicon chip is a promising way to link qubits, but real devices come with rough surfaces and stray charges. Jack J. Turner and colleagues simulate that transport in a 2025 quantum physics preprint. They focus on silicon metal-oxide-semiconductor devices, where conveyor-belt shuttling demonstrations lag behind a related material system.
Their full three-dimensional simulations solve the Poisson and time-dependent Schrödinger equations across shuttling speeds and gate voltages. At low gate voltages, extra screening from multi-layer gates collapses conveyor-belt motion into a bucket-brigade mode, exciting the electron's orbital state. Stronger confinement restores smooth transport, which proved robust against interface roughness, gate misalignment, and defects buried in the oxide. Defects sitting exactly at the silicon interface remain dangerous, though. Some can excite passing electrons or even capture them outright, marking the key challenge for reliable designs.
Catalog record
| CREATOR | Jack J. Turner, Christian W. Binder, Guido Burkard, Andrew J. Fisher |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 62 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-03853
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Modelling the Impact of Device Imperfections on Electron Shuttling in SiMOS devices. Jack J. Turner, Christian W. Binder, Guido Burkard, Andrew J. Fisher Abstract Extensive theoretical and experimental work has established high-fidelity electron shuttling in Si/SiGe systems, whereas demonstrations in Si/SiO 2 (SiMOS) remain at an early stage. To help address this, we perform full 3D simulations of conveyor-belt charge shuttling in a realistic SiMOS device, building on earlier 2D modelling. We solve the Poisson and time-dependent Schrödinger equations for varying shuttling speeds and gate voltages, focusing on potential pitfalls of typical SiMOS devices such as oxide–interface roughness, gate fabrication imperfections, and charge defects along the transport path. The simulations reveal that for low clavier-gate voltages, the additional oxide screening in multi-layer gate architectures causes conveyor-belt shuttling to collapse to the bucket-brigade mode, inducing considerable orbital excitation in the process. Increasing the confinement restores conveyor-belt operation, which we find to be robust against interface roughness, gate misalignment, and charge defects buried in the oxide. However, our results indicate that defects located at the Si/SiO 2 -interface can induce considerable orbital excitation. For lower conveyor gate biases, positive defects in the transport channel can even capture passing electrons. Hence we identify key challenges and find operating regimes for reliable charge transport in SiMOS architectures. I Introduction Silicon-based spin qubits have emerged as a strong candidate for scalable quantum architectures due to their high packing density 65 , long coherence times 54 ; 64 , and compatibility with industry fabrication processes 16 ; 55 . High fidelity single-qubit 62 ; 56 and two-qubit gates 39 ; 59 ; 37 — realised by electron spin resonance (ESR) or electric dipole spin resonance (EDSR) and the electron exchange interaction 2 — as well as initialisation 36 ; 19 and fast, compact readout 52 ; 6 have been demonstrated. Figure 1: (a) Schematic of a typical quantum dot array structure used for shuttling with clavier-gates connected in ABCDABCD configuration. Figure modified from 21 . (b) Bucket-brigade shuttling transfers the electron wavefunction between adjacent QDs through a series of adiabatic Landau-Zener transitions that tip the particle from one dot to the next. (c) Conveyor-belt shuttling creates a smoothly travelling potential minimum by applying phase-shifted sinusoidal voltages to adjacent electrodes, continuously transporting the electron along the array. (d) Example phase-shifted voltage pulses applied to clavier-gates for V_{c}=500 mV and shuttling speed v=50 m/s, which corresponds to a frequency of 357 MHz for the 4-gate unit cell with period d=140\text{ nm} shown in (e). (e) Cross-section of the simulated shuttling device, with its clavier-gates in ABCDABCD configuration. The layer 1 confinement gates (‘side-gates’) are separated from the Si/SiO 2 interface in the z-direction by 15 nm of oxide, and each layer has 5 nm of oxide deposited between them. The electrostatic potential is solved for the entire device and plotted here with contours. The Schrödinger evolution occurs in a smaller quantum region in the channel, shaded in gray. Owing to the signal fan-out problem, current state-of-the-art devices are mostly restricted to linear, bilinear, or trilinear layouts 50 ; 13 ; 31 , and a central challenge is establishing longer-range connectivity between qubits whilst preserving coherence. Shuttling — physically transporting electrons around a silicon chip using an architecture like that shown in Fig. 1 a — is an empowering protocol for facilitating quantum information transfer across large distances, enabling enhanced or even all-to-all connectivity 27 . This is valuable both for near-term intermediate-scale quantum (NISQ) applications and for longer-term fault-tolerant quantum computation (FTQC) approaches: for NISQ it can significantly reduce circuit depth by eliminating the need for SWAP operations required to bring distant qubits into proximity for two-qubit gates, while for FTQC, shuttling-based proposals supporting the surface code 26 ; 53 ; 3 ; 48 offer promising alternatives to SWAP-based architectures. By exploiting the long-range connectivity enabled by shuttling, these proposals have also been extended to support high-rate schemes such as low-density parity-check codes 49 . Such schemes rely primarily on conveyor-belt shuttling, which was shown to be superior to bucket-brigade shuttling in an analysis by Langrock et al. 27 . The bucket-brigade scheme (Figure 1 b) uses a series of adiabatic Landau-Zener transitions (LZT) across an array of tunnel-coupled quantum dots (QDs) to transport electrons by tipping the electron from one well to the next 14 ; 38 , while the conveyor-mode protocol (Fig. 1 c) transports electrons in a single moving quantum dot 47 . Both methods require only a fixed number of voltage signals, but for bucket-brigade shuttling these must be carefully fine-tuned to trigger only adiabatic LZTs in specific QDs, since any diabatic LZT will cause the shuttling direction to reverse. For these reasons conveyor-belt mode is generally considered the preferred method and is what we consider in this work. In silicon-germanium (Si/SiGe) heterostructures, there have been a number of experiments demonstrating successful charge and spin shuttling 47 ; 38 ; 61 ; 58 . Most notably, De Smet et al. 10 , used the conveyor-belt mode to shuttle an electron over a distance of 10 \rm\mu m in under 200 ns with 99.5 \% fidelity. These experiments have shown that coherent transport of spin qubits is reliable, paving the way for practical implementations in quantum processors. However, translating these techniques to silicon oxide (Si/SiO 2 )-based devices, also known as SiMOS devices, introduces additional complexities. Unlike in Si/SiGe-based devices, where a germanium-alloyed buffer layer of silicon separates trapped electrons from the oxide layer, SiMOS devices have electrons confined directly against the abrupt heterointerface. Without the buffer layer, confined electrons do not benefit from the same enhanced electrostatic screening of defects in the oxide layer and at the Si/SiO 2 interface. As a result, they may be expected to be more sensitive to irregularities in the electrostatic potential landscape caused by the amorphous oxide layer. Despite these difficulties, SiMOS devices offer key advantages: they are compatible with standard semiconductor fabrication processes 16 , have larger spatial variations in the g-factor that can enable electrostatic control without external micromagnets 2 , and typically have larger and more tunable valley splittings due to the abrupt interface and larger conduction band offset 60 ; 12 ; 42 . Therefore, establishing the reliability of electron shuttling in Si/SiO 2 -based devices is an important objective, and it is encouraging that successful charge shuttling experiments are beginning to emerge for modest distances. For instance, Lin et al. 33 , recently demonstrated high-fidelity bucket-brigade shuttling across three QD sites on a SiMOS device, utilising Pauli spin-blockade (PSB) readout to achieve an average spin shuttling fidelity of 99.8%. Charge defects buried in the oxide or located at the Si/SiO 2 interface are known to cause transistor threshold voltage shifts 4 , cause random telegraph fluctuations ( 1/f noise) 24 ; 23 ; 41 ; 11 , and increase qubit-to-qubit variability 35 . They are also expected to present the greatest obstacle to successful charge shuttling in SiMOS devices. These defects have been studied with a wide range of techniques including transport measurements 11 ; 25 , electron spin resonance 1 ; 30 ; 44 , and frequency-modulated atomic force microscopy 8 ; 9 . Charged defects in the SiO 2 layer are