Multimode interface between optical free-space- and waveguide modes

Teresia Stranden, Oussama Korichi, Matias Eriksson, Matteo Cherchi, George Thomas, Robert Fickler · 2025

Read Multimode interface between optical free-space- and waveguide modes by Teresia Stranden, Oussama Korichi, Matias Eriksson, Matteo Cherchi, George Thomas, Robert Fickler (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-02658.txt.

Introduction

Teresia Stranden and five co-authors build a bridge between light flying free and light guided in chips. Free space beams are easy to shape into many spatial modes, while waveguides on chips are compact and stable. Joining the two worlds is key for larger multi mode communication networks.

Their multimode interface passes several spatial modes between the two domains at once. A good interface loses little light and keeps modes separate and clean. Such links could let chip based processors handle the rich beams used in high capacity optical communication and sensing. A clean bridge lets chip gear tap beams that roam free, which is how most light based links start out.

Catalog record

CREATORTeresia Stranden, Oussama Korichi, Matias Eriksson, Matteo Cherchi, George Thomas, Robert Fickler
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-02658

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multimode interface between optical free-space- and waveguide modes Preprint: APS/123-QED Teresia Stranden, Oussama Korichi, Matias Eriksson, Matteo Cherchi, George Thomas, Robert Fickler Abstract Free-space and on-chip photonic systems are key components in optical communication networks. While free-space beams allow for the flexible generation and manipulation of spatial modes, integrated waveguides provide compact and stable platforms for on-chip signal processing. Bridging these two domains is essential for scalable multi-mode communication networks. Here, we present an efficient, broadband interface capable of converting multiple higher-order free-space Laguerre–Gauss (LG) modes into corresponding waveguide modes using the multi-plane light conversion (MPLC) scheme. We experimentally demonstrate low-crosstalk mode conversion between various set of three LG modes, and the first three TE modes of a multimode silicon waveguide across the telecom C-band. The system operates passively without active switching and can be adapted to different spatial mode sets. This platform provides a pathway to increased data capacities and may enable more compact and efficient multi-mode optical communication and on-chip processing schemes. I Introduction With an ever increasing need for higher data rates, photonics has become an important player in high-speed data transfers and on-chip information processing. Here, a key focus has been increasing the ability to multiplex multiple signals using various frequency 19 ; 24 ; 18 and polarization 17 bands with mostly only using a single spatial channel, e.g., a single-mode fiber or waveguide. As first signs of reaching the fundamental limits of wavelength multiplexing have been achieved 15 , the focus has been widened to also explore additional routes to avoid a so-called capacity-crunch, namely the focus on additional multiplexing using spatial modes. Over long distances higher-order spatial modes in fiber and free space have been explored to enlarge the number of multiplexed channels achieving data rates up to Peta-bit-per-second in either domain 26 ; 34 . In free space, Laguerre-Gauss (LG) modes have widely been used as the preferred set of traverse spatial modes 2 , as their cylindrical symmetry nicely matches most optical systems, and thus they allow the highest information density for a given aperture if the full transverse domain (azimuthal and radial) is taken into account 33 . Standard higher-order fiber modes show a similar transverse spatial profile, however, fiber stress and bends commonly result in complex mode-coupling dynamics during the propagation of optical signals, which can either be mitigated through custom-tailored fibers 6 or the use of a topologically protected subset of modes 25 . Specialized multi-mode fibers have further been explored to realize amplifiers working simultaneously for multiple modes along with studies exploring nonlinear optical effects in such advanced fiber systems 9 . Over short distances of signal transmissions and for local optical signal processing tasks, multi-mode waveguide chips have been developed to also provide an enhanced solution for photonic integrated circuits (PIC). Here, significant progress has been made in solving the challenges of effective mode manipulations and the beneficial use of the offered increased flexibility in the design of such devices, incl. on-chip multiplexers, active mode manipulations, and mode couplers to name a few 7 ; 22 ; 32 . With fiber- and free space spatial modes being the backbone for long-distance transmission of high-bandwidth optical communication and multimode silicon photonic chips serving as local high-capacity information processing units, a natural requirement in future multimode networks appears: An efficient interface between sets of free space and waveguide modes that simultaneously links all data channels, ideally over a broad frequency range not to prevent additional wavelength division multiplexing. Figure 1: Sketch of the experimental setup. ( LG_{00} , LG_{10} , LG_{20} ) modes are generated using the first hologram. Then, the multi-plane light conversion (MPLC) system is implemented with a spatial light modulator (SLM). The MPLC converts the input modes to the first waveguide modes, which are coupled into a multimode Si rib waveguide using an aspheric lens. After propagation through the waveguide, the output field is imaged onto a camera. Off-axis digital holography is performed by interfering the signal beam with a reference beam, which is separated before the MPLC and adjusted in intensity and polarization using waveplates. A similar interferogram is recorded before the waveguide to characterize the MPLC output. In this letter, we present a multi-mode interface that is able to convert multiple free-space optical modes into waveguide modes over the full C-band without any need for active switching between the channels. Our interface is based on a multi-plane light conversion (MPLC) scheme, which is realized by four consecutive phase modulation masks with a short propagation distance between. We show that a set of three higher-order Laguerre-Gauss modes can be converted to the first three higher-order waveguide modes of a silicon multi-mode waveguide without inducing a significant crosstalk. We further show that the converted light can be efficiently coupled and transmitted to the multi-mode waveguide, again without significant increase of crosstalk and for the entire telecom C-band. Finally, we demonstrate that the interface can also be adjusted to different sets of LG modes including their higher radial orders without a change in performance. Given the similarity of higher fiber- and free-space modes, our device can be seen as an essential building block for future multi-mode optical communication and data processing. II Background At the heart of our work lies an MPLC system, which is a scheme that was recently developed for spatial mode multiplexing 21 ; 12 ; 26 but also found its applications in single-to-multi fiber coupling 20 , image processing 27 , sensing 10 , turbulence characterization in free space transmissions 3 , quantum gate operations 5 , and quantum state characterization 23 to name a few of many recent applications. In our implementation, the MPLC is used to realized a interface between a set of free space transverse spatial modes and a multi-mode waveguide, i.e., it is designed to convert a given set of LG modes to the modes of a rib waveguide. In this proof-of-principle demonstration we restrict our MPLC scheme to be realized by only four phase modulations resulting in the limitation of being able to convert a set of three modes simultaneously. The required phase modulations are obtained using an optimization algorithm called wavefront matching 16 and is implemented using a liquid-crystal phase-only spatial light modulator. We note that more evolved modulation schemes with more modulation planes have been demonstrated, meaning that the interface’s performance could be improved in terms of efficiency, cross-talk, and also number of converted modes and, Thus, can be scaled up to interface a larger subset of waveguide modes supported by the chip than those addressed in this work. III Experimental setup The experimental setup is sketched in Fig. 1 . A laser beam from a fiber-coupled continuous-wave tunable laser (ID Photonics CoBrite DX1 S, \lambda~\in~[1528~\text{nm},1565~\text{nm}] ) is first collimated and magnified with a 4-f system to a beam waist radius of 3.0 mm, which then enters the MPLC system. The four required phase profiles for the MPLC are displayed on a single spatial light modulator (Holoeye Pluto-2) on different spatial locations. The beam is reflected between the SLM and a mirror impinging on the SLM four times, applying each of the phase modulations upon consecutive reflections from the SLM. The first hologram is additionally used

Read the complete text