Predicting cement microstructure and mechanical properties in hydrating cement paste with a Phase-Field model
Alexandre Sac-Morane, Katerina Ioannidou, Manolis Veveakis, Hadrien Rattez · 2025
Read Predicting cement microstructure and mechanical properties in hydrating cement paste with a Phase-Field model by Alexandre Sac-Morane, Katerina Ioannidou, Manolis Veveakis, Hadrien Rattez (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-01407.txt.
Introduction
Alexandre Sac-Morane and co-authors model how cement hardens at tiny scales. As cement paste takes in water, its inner form shifts. That form sets how strong the final paste will be. Tracking the shift helps design mixes that last.
Their phase-field model tracks growth and melt of grains in the paste. It rests on the heat rules for those changes. The model forecasts both inner form and strength traits as cure goes on. Good forecasts can cut lab trials and guide greener mixes with less waste and lower carbon cost.
Catalog record
| CREATOR | Alexandre Sac-Morane, Katerina Ioannidou, Manolis Veveakis, Hadrien Rattez |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2512-01407
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Predicting cement microstructure and mechanical properties in hydrating cement paste with a Phase-Field model Alexandre Sac-Morane, Katerina Ioannidou, Manolis Veveakis, Hadrien Rattez Abstract Predicting the evolving microstructure of hydrating cement is essential for understanding and modeling its mechanical property development. Physics-based continuum approaches offer a rigorous framework for capturing the thermodynamics of dissolution and precipitation processes at the microstructural scale. In this work, we present an adapted Phase-Field (PF) model for cement hydration that resolves key physical inconsistencies in existing PF formulations by introducing a revised free-energy potential and distinct equilibrium constants for clinker dissolution and hydrate precipitation. The resulting PF framework reproduces microstructural evolution, yielding realistic porosity levels and continuous phase boundaries in close agreement with experimental observations. The predicted hydrated microstructures are subsequently used in a computational homogenization scheme to evaluate the elastic response of the material. The PF-derived mechanical properties show good agreement with experimental trends, supporting the ability of the proposed framework to consistently link hydration chemistry, microstructure formation, and the resulting mechanical response. † † highlights: A physics-based Phase-Field model predicts the microstructure evolution during the hydration of cement-based material. Predicted microstructures are used to derive the elastic moduli of the composite material with a computational homogenization scheme. Predicted microstructures and elastic moduli show excellent agreement with data available in the literature. 1 Introduction A central objective in the study of cement-based materials is to elucidate and predict their mechanical behavior [ 62 ] , in order to enable the optimization of existing formulations or the development of alternative binders [ 79 ] , particularly those with reduced environmental impact. Over the past decades, numerous analytical and empirical models have been proposed to capture the wide range of factors governing the mechanical performance of cementitious systems [ 25 , 18 , 62 ] . These factors include, among others, the water-to-cement mass ratio ( w/c ), raw material properties, particle size distribution, and the presence of chemical or mineral additives [ 21 , 84 , 40 , 43 , 58 ] . Beyond these empirical formulations, foundational physical models were developed to describe the evolution of the hydrate microstructure. The Powers–Brownyard model [ 70 ] provided the first quantitative framework for the structure of hydrated cement paste, distinguishing between gel pores and capillary pores. Later, idealized microstructures were described using homogenization approaches, involving three steps—description, localization, and upscaling—to relate microscale phase morphology to macroscale mechanical properties [ 1 , 74 ] . A variety of homogenization schemes have been proposed [ 11 , 54 , 26 , 31 , 66 ] , with the dilute [ 23 ] , self-consistent [ 32 ] , and Mori–Tanaka [ 56 ] approaches being the most widely adopted. Such schemes can be concatenated across multiple scales—from hydrate foam (20 µm) to cement paste (0.7 mm), and from cement paste to mortar (1 cm) [ 67 , 65 , 68 ] . Coupling these approaches with hydration kinetics enables the prediction of evolving mechanical properties throughout hydration [ 88 ] . These efforts established the conceptual link between hydration degree, porosity, and mechanical performance—a relationship modern computational models now aim to simulate explicitly [ 7 ] . Nonetheless, these homogenization methods rely on idealized or simplified microstructures. To overcome such limitations, microstructure-explicit hydration models were developed. One of the earliest is HYMOSTRUC [ 87 ] , where reactants and products are idealized as continuum spheres whose sizes evolve during dissolution or precipitation. This framework was later extended to voxel-based microstructures in CEMHYD3D [ 33 ] , where hydration is simulated through Cellular Automata (CA). Although widely used, CA approaches are constrained by voxel resolution. To alleviate this limitation, alternative solvers such as HydratiCA [ 13 ] , \mu ic [ 10 ] , and the Integrated Particle Kinetics Model [ 69 ] were introduced. However, all those methods are based on semi-empirical reaction coefficients. More recently, level-set based approaches were proposed to describe microstructure evolution using continuous fields and physics-based dissolution–precipitation laws [ 60 ] . Although these methods incorporate fundamental hydration kinetics, the underlying Kooi law [ 42 ] is formulated at the macroscale and does not strictly satisfy local physical constraints at the microstructural scale. To address this issue, Phase-Field (PF) methods have emerged as a promising alternative [ 64 ] . PF formulations naturally describe interface evolution based on local thermodynamic principles and have been successfully applied to various dissolution/precipitation [ 55 , 82 , 28 , 46 , 73 , 72 ] and fracture problems [ 86 , 90 , 89 ] . When coupled with diffusion equations for dilute species, PF models enable dissolution and precipitation to occur whenever local solute concentrations deviate from their equilibrium values, thus ensuring thermodynamic consistency at the microstructural scale. However, the formulation introduced in [ 64 ] presents two limitations that motivate the present work. First, the free-energy functional employed permits spontaneous gel precipitation even when the system is at equilibrium. Second, the equilibrium concentrations associated with source–solute (dissolution) and solute–gel (precipitation) reactions are assumed equal, whereas they are known to be distinct according to established hydration theory [ 14 , 77 ] . These inconsistencies hinder the model’s physical fidelity and predictive capability. To address these issues, the present work proposes an adapted Phase-Field formulation in which the free-energy landscape and equilibrium relationships are revised to better reflect the thermodynamics of cement hydration. Once the hydrated microstructure has been computed, the mechanical behavior of the hardened cement-based material can be determined using computational homogenization. This permits the calculation of properties such as Young’s modulus, shear modulus, Poisson’s ratio, bulk modulus, and strength parameters, which depend explicitly on microstructural morphology and hydration state [ 29 , 48 ] . The phases (pore, skeleton, binder) can be distinguished and characterized based on their intrinsic properties. The composite microstructure is then subjected to a Finite Element or Fast Fourier Transform-based homogenization scheme to infer macroscale mechanical parameters [ 39 , 59 , 2 ] . The contribution of this work is organized as follows. First, the formulation of the adapted PF model for cement hydration is presented. The framework is then applied to boundary-value problems for w/c=0.3 and 0.5 . The microstructural evolution predicted by the model is compared with results from CEMHYD3D [ 59 ] and with experimental measurements [ 84 , 53 ] . Finally, the resulting hydrated microstructures are subjected to mechanical loading (shear and tension) in order to estimate mechanical properties such as Young’s and shear moduli, which are compared to values reported in the literature, particularly those in [ 59 ] . 2 Formulation of the microstructure evolution This section focuses on the modelization of the microstructure evolution during hydration. This chemical process is divided into two main reactions: dissolution and precipitation. The source phases (mainly C 3 S, C 2 S, C 3 A and C 4 AF) react with water and dissolve [ 83 , 98 ] . The generated solute diffuses and is consumed during the precipitation of the phases of the cement paste (mainly calcium silicate hydrates C-S-H and Portlandite CH) [ 83 , 98 ] . For simplicity reasons, only three phases are considered in this paper: the source (C