Generalization of Elliptical-Cylindrical Flux Rope Models for ICME Reconstruction

M.Martí Massó Moreno, C.A.Carlos Arturo Pérez-Alanis, P.K.P. K. Manoharan \orcid 0000-0003-4274-211X · 2025

Read Generalization of Elliptical-Cylindrical Flux Rope Models for ICME Reconstruction by M.Martí Massó Moreno, C.A.Carlos Arturo Pérez-Alanis, P.K.P. K. Manoharan \orcid 0000-0003-4274-211X (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2512-01131.txt.

Introduction

M Martí Massó Moreno, C Pérez-Alanis, and P Manoharan generalize a model for solar eruptions in a 2025 paper. Interplanetary coronal mass ejections are huge clouds of solar material that travel through space. Scientists model them as flux ropes, twisted bundles of magnetic field, to rebuild their shape and field from spacecraft data.

Their generalized elliptical-cylindrical flux rope model allows a nonzero poloidal component in the internal magnetic field, a part older models set aside. A two-step method separates the geometric fit from the magnetic field fit. That split should improve stability and consistency when fitting real events.

Catalog record

CREATORM.Martí Massó Moreno, C.A.Carlos Arturo Pérez-Alanis, P.K.P. K. Manoharan \orcid 0000-0003-4274-211X
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2512-01131

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Generalization of Elliptical-Cylindrical Flux Rope Models for ICME Reconstruction M.Martí Massó Moreno, C.A.Carlos Arturo Pérez-Alanis, P.K.P. K. Manoharan \orcid 0000-0003-4274-211X Abstract We present a generalized elliptical–cylindrical flux–rope model for interplanetary coronal mass ejections (ICMEs) that allows for a nonzero poloidal component in the internal magnetic field. A two–step reconstruction algorithm is introduced, decoupling the geometric configuration from the magnetic–field fitting to improve numerical stability and physical consistency. Applied to Parker Solar Probe data, the new radial–poloidal model preserves the global flux–rope geometry while achieving a substantially better fit to the internal magnetic field than the traditional radial model, offering a more accurate and realistic description of ICME structures. keywords Interplanetary Coronal Mass Ejections (ICMEs); Magnetic Flux Ropes; Elliptical–Cylindrical Models; Magnetic Field Reconstruction; Parker Solar Probe; Space Weather 1 Introduction Interplanetary Coronal Mass Ejections (ICMEs) are large expulsions of plasma from the solar corona that can be detected in situ by spacecraft in the interplanetary medium. Observationally, such CMEs often show an initially irregular shock front followed by a smoother, more coherent magnetic structure known as a Magnetic Flux Rope (MFR). An MFR can be broadly defined as a flux tube whose magnetic field lines twist around a single common axis ( 6 ) . Flux rope observations can be interpreted using a variety of geometries and internal physical constraints. Some of the most common analytical descriptions are the linear force–free model of 2 (often referred to as the Lundquist model) and the force–free uniform twist model of 1 . More recently, models with more relaxed constraints or more generic geometries have been developed, for example the circular–cylindrical model ( 4 ) and the elliptic–cylindrical model ( 5 ) , as well as subsequent extensions and applications ( 3 , e.g.) . Nevertheless, these approaches still enforced an internally purely radially defined geometry by imposing that the radial component of the current density vanish. In this work, we develop a generalization that allows for a non-zero radial component of the current density and present a new reconstruction method, alternative to the global algorithms used thus far. This method ensures convergence of the solutions and enables a comprehensive analysis of all possible geometric configurations corresponding to the spacecraft’s trajectory through the MFR. 2 Generalization of the Elliptical Cylindrical model 2.1 Elliptical-Cylindrical Coordinate System Considering the above hypotheses, we will attempt to generalize the possible internal magnetic‐field configurations while maintaining the local cylindrical–elliptical geometry. The cylindrical–elliptical coordinates and their contravariant basis vectors are defined as follows: x=a\,r\,\cos\varphi,\qquad y=y,\qquad z=\delta\,a\,r\,\sin\varphi. (1) {\mathbfit\varepsilon}_{r}=a\,(\cos\varphi,\;0,\;\delta\,\sin\varphi),\quad{\mathbfit\varepsilon}_{y}=(0,\;1,\;0),\quad{\mathbfit\varepsilon}_{\varphi}=a\,r\,(-\,\sin\varphi,\;0,\;\delta\,\cos\varphi). (2) Here, a is the semi‐major axis of the elliptical section, r is the radial coordinate, \delta is the distortion parameter of the section, and \varphi is the poloidal angle within the section. The metric tensor in this geometry is g=\begin{pmatrix}g_{rr}&0&g_{r\varphi}\\ 0&g_{yy}&0\\ g_{\varphi r}&0&g_{\varphi\varphi}\end{pmatrix}=\begin{pmatrix}a^{2}(\cos^{2}\varphi+\delta^{2}\sin^{2}\varphi)&0&a^{2}r\sin\varphi\cos\varphi(\delta^{2}-1)\\ 0&1&0\\ a^{2}r\sin\varphi\cos\varphi(\delta^{2}-1)&0&a^{2}r^{2}(\sin^{2}\varphi+\delta^{2}\cos^{2}\varphi)\end{pmatrix}. (3) Its determinant is \det(g)=a^{4}r^{2}\delta^{2} , and the magnitude of a physical vector (such as the magnetic field) in this metric is given by: \lvert\mathbf{B}\rvert=\sqrt{\,g_{rr}(B^{r})^{2}+g_{yy}(B^{y})^{2}+g_{\varphi\varphi}(B^{\varphi})^{2}+2\,g_{r\varphi}\,B^{r}B^{\varphi}\,} (4) 2.2 Magnetic Field Requirements For the model to be valid, it must satisfy specific conditions governing both the magnetic field configuration and the associated current density field. To ensure the magnetic field is physically realizable within the specified geometry, the primary condition is that its divergence must be zero, as mandated by Gauss’s law for magnetic fields: \nabla\cdot\mathbf{B}=\partial_{r}(rB^{r})+\partial_{\varphi}(rB^{\varphi})+\partial_{y}(rB^{y})=0 (5) We assume, consistent with prior models ( 5 , 6 ), that no physical properties vary along the axial direction of the flux rope (i.e., \partial_{y}=0 ). Additionally, each magnetic field component is expressed as a product of separable functions of the radial coordinate r and azimuthal angle \varphi . Generally, we write: \begin{cases}B^{r}(r,\varphi)=f_{1}(r)g_{1}(\varphi)+K_{1}\\ B^{y}(r,\varphi)=f_{2}(r)g_{2}(\varphi)+K_{2}\\ B^{\varphi}(r,\varphi)=f_{3}(r)g_{3}(\varphi)+K_{3}\end{cases} (6) Then, the divergence equation can be reduced to the following partial-differential equation: g_{1}(\varphi)\,\partial_{r}\!\bigl(rf_{1}(r)\bigr)\;+\;rf_{3}(r)\,\partial_{\varphi}\!\bigl(g_{3}(\varphi)\bigr)\;=\;0 (7) And when solving it, we get the following relations: g_{3}(\varphi)=C_{1}\;-\;k\int g_{1}(\varphi)\,d\varphi\qquad\qquad f_{1}(r)=\frac{k}{r}\int rf_{3}(r)\,dr\;+\;\frac{C_{2}}{r} (8) Where C_{1} and C_{2} are integration constants, and k is the constant used for solving the PDE. The next step now will be ensuring continuity at the boundary of the Flux Rope. The condition to be satisfied will be: B^{r}(R,\varphi)=0=\left[\frac{k}{R}\int_{0}^{R}r\,f_{3}(r)\,dr+\frac{C_{2}}{R}\right]\!g_{1}(\varphi)+K_{1} (9) Since the term multiplying g_{1}(\varphi) is nonzero, the only solution is for both g_{1}(\varphi) and K_{1} to be identically zero. This implies that the poloidal component now takes the form: B^{\varphi}(r,\varphi)=f_{3}(r)\,C_{1}+K_{3}\;\equiv\;f_{3}(r) (10) where, for simplicity, we have absorbed the constants C_{1} and K_{3} into the function f_{3}(r) . This leaves us with the following form for the magnetic-field components: \begin{cases}B^{r}=0\\ B^{y}(r,\varphi)=f_{2}(r)\,g_{2}(\varphi)+K_{2}\\ B^{\varphi}(r)=f_{3}(r)\end{cases} (11) 2.3 Current Density Derivation For the case of the current density vector {\mathbfit j} within the flux rope, it must be ensured that no singularities or discontinuities arise. This requires that all components be smooth throughout the volume and that the limits exist as r\to 0 . The current density components are obtained via the generalized Ampère’s law in the elliptical‐cylindrical metric: \nabla\times{\mathbfit B}=\frac{\varepsilon^{ijk}}{\sqrt{\det(g)}}\,\partial_{j}\bigl(g_{kl}B^{l}\bigr)=\mu_{0}\,{\mathbfit j}, (12) where \varepsilon^{ijk} is the Levi‐Civita tensor in the coordinate basis \{i,j,k\}=\{r,y,\varphi\} , g_{kl} is the metric tensor, and \sqrt{|g|}=a^{2}r\delta is the square root of its determinant. Here, g_{kl}B^{l} denotes the covariant components of the magnetic field (recalling the conversion: B_{i}=g_{il}B^{l} ). At the end, we obtain these components: \displaystyle j^{r} \displaystyle=\frac{1}{a^{2}\delta r\mu_{0}}(-\partial_{\varphi}B^{y}) (13) \displaystyle j^{y} \displaystyle=\frac{1}{a^{2}\delta r\mu_{0}}\left[\partial_{\varphi}(g_{r\varphi}B^{\varphi})-\partial_{r}(g_{\varphi\varphi}B^{\varphi})\right] (14) \displaystyle j^{\varphi} \displaystyle=\frac{1}{a^{2}\delta r\mu_{0}}\partial_{r}B^{y} (15) And substituting the magnetic field from 11 and the metric tensor components from 3 , we obtain: \begin{gathered}j^{r}(r,\varphi)=\frac{-f_{2}(r)\,g^{\prime}_{2}(\varphi)}{a^{2}\,\delta\,r\,\mu_{0}}\\[6.0pt] j^{y}(r,\varphi)=\frac{1}{\delta\,\mu_{0}}\Bigl[f_{3}(r)\,(\delta^{2}-1)\,(2\cos^{2}\varphi-1)-(\sin^{2}\varphi+\delta^{2}\cos^{2}\varphi)\,(2f_{3}(r)+r\,f_{3}^{\prime}(r))\Bigr]\\[6.0pt] j^{\varphi}(r,\varphi)=\frac{f^{\prime}_{2}(r)\,g_{2}(\varphi)}{a^{2}\,\delta\,r\,\mu_{0}}\end{gathered} (16) 2.4 Current Density Requirements To ensure the current density field is physically valid, its components must have a finite limit throughout the domain, particularly at the center ( r=0 ), where singularities could arise. For this limit to exist, considering that trigonometric functions are not constant, each component must satisfy: \lim_{r\to 0}j^{i}(r,\varphi)=0,\quad i=r,y,\varphi (17) For this to happen, all trigonometric functions must be multiplied by a radial function that vanishes as r\to 0^{+} . Two types of solutions will be considered for this purpose: polynomial and exponential. Let’s now examine the conditions each must satisfy: • From the j^{r} component we extract that: – Polynomial case: \quad f_{2}(r)\propto r^{n_{2}},\quad n_{2}>1 – Exponential case: \quad f_{2}(r)\propto e^{-1/r^{\alpha}},\quad\alpha>0 • From the j^{y} component we see that: f_{3}(r)\propto r^{n_{3}},\quad n_{3}>0,\quad\text{or}\quad f_{3}(r)\propto e^{-1/r^{\alpha}},\quad\alpha>0, which ensures j^{y}\to 0 as r\to 0 . • Finally, from the j^{\varphi} component it is required that the minimum order of f_{2}(r) be strictly greater than 2. Since n_{2}>2 for j^{\varphi} is more restrictive than n_{2}>1 for j^{r} , we adopt n_{2}>2 . With this, we now know all the necessary restrictions to ensure the existence of the magnetic field in the elliptic–cylindrical structure under consideration. Any function satisfying these conditions will be physically valid. 3 Iterative Reconstruction Algorithm To reconstruct the internal magnetic field of the Flux Rope and define both its orientation and the spacecraft’s trajectory within it, we iterate over all possible geometric configurations of the structure. For each configuration, we determine which one yields the best fit between the model and the experimental data. In practice, the spacecraft crosses the Flux Rope and provides data in a standard coordinate system (GSE or RTN). However, the magnetic models described above are defined in an internal elliptical-cylindrical coordinate system, meaning we must first transform the observational data into these internal coordinates for a meaningful fit. This transformation involves first converting

Read the complete text