Neural Deprojection of Galaxy Stellar Mass Profiles

M. J. Yantovski-Barth, Hengyue Zhang, Nolan Smyth, Connor Stone, Martin Bureau, Yashar Hezaveh, Laurence Perreault-Levasseur · 2025

Read Neural Deprojection of Galaxy Stellar Mass Profiles by M. J. Yantovski-Barth, Hengyue Zhang, Nolan Smyth, Connor Stone, Martin Bureau, Yashar Hezaveh, Laurence Perreault-Levasseur (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-20746.txt.

Introduction

M. J. Yantovski-Barth and colleagues present in 2025 a neural shortcut for weighing the supermassive black holes at galaxy centres. The weighing needs a three-dimensional map of the galaxy's stellar mass, usually deprojected from telescope images. Dust or a bright active nucleus can block that route by hiding or outshining the starlight. Their neural network replaces the imaging step entirely.

The network translates Nuker profile parameters, numbers describing how starlight is concentrated, into Multi Gaussian Expansion components that deproject analytically. It was trained on 6.25 million simulated profiles spanning the usual parameter ranges. Inside SuperMAGE, a Bayesian pipeline for black hole masses, the approach was applied to ALMA radio data. Its masses matched the best existing models, and the method now reaches dust-obscured and active galaxies where optical analysis struggles. That widens the set of galaxies whose central black holes can be weighed at all.

Catalog record

CREATORM. J. Yantovski-Barth, Hengyue Zhang, Nolan Smyth, Connor Stone, Martin Bureau, Yashar Hezaveh, Laurence Perreault-Levasseur
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-20746

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Neural Deprojection of Galaxy Stellar Mass Profiles M. J. Yantovski-Barth, Hengyue Zhang, Nolan Smyth, Connor Stone, Martin Bureau, Yashar Hezaveh, Laurence Perreault-Levasseur Abstract We introduce a neural approach to dynamical modeling of galaxies that replaces traditional imaging-based deprojections with a differentiable mapping. Specifically, we train a neural network to translate Nuker profile parameters into analytically deprojectable Multi Gaussian Expansion components, enabling physically realistic stellar mass models without requiring optical observations. We integrate this model into SuperMAGE, a differentiable dynamical modelling pipeline for Bayesian inference of supermassive black hole masses. Applied to ALMA data, our approach finds results consistent with state-of-the-art models while extending applicability to dust-obscured and active galaxies where optical data analysis is challenging. 1 Introduction A central open question in galaxy evolution is the origin of the tight correlation between various galaxy properties and the mass of the supermassive black hole (SMBH) at the centre of each galaxy (e.g., [1, 2, 3]). Probing this correlation requires precision mass measurements of SMBHs in a wide variety of galaxies. Dynamical modelling of cold molecular gas has produced some of the most accurate black hole mass measurements to date [4]. Since the motions of gas trace the total gravitational potential, the fundamental challenge in dynamical modelling is to disentangle the mass of stars from the mass of the SMBH. Traditionally, the following approach has been used (e.g., [5, 6]): 1. Optical observations of the target galaxy provide an estimate of the projected surface density of light from stars in the galaxy. 2. The optical surface density is deprojected into 3D by fitting a Multi Gaussian Expansion (MGE) model to the 2D optical surface brightness [7]: \Sigma(x,y)=\sum_{i=1}^{N}\frac{\Sigma_{i}}{2\pi\sigma_{i}^{2}q^{\prime}_{i}}\exp{\left[-\frac{1}{2\sigma_{i}^{2}}\left(x^{2}+\frac{y^{2}}{q_{i}^{\prime 2}}\right)\right]}. (1) Here, \Sigma is the surface brightness and x and y are the major-axis and the minor-axis coordinates. The MGE fits the 2D surface brightness distribution with a sum of Gaussians, each with a different normalization \Sigma_{i} , standard deviation \sigma_{i} , and sky-projected axis ratio q_{i}^{\prime} . The Gaussians are then deprojected into 3D, given an inclination i and assuming axisymmetry, simply by converting q_{i}^{\prime} and i into intrinsic axis ratios q_{i} . The deprojected MGE light profile is converted to a 3D mass density using a mass-to-light ratio ( M/L ), and a point mass is added to represent the black hole. 3. The corresponding gravitational potential is converted to a velocity curve. The orbital velocity of the gas "Doppler" shifts the light it emits, which allows the velocity to be inferred from the data based on the shifted spectrum of the emitted light. Hence, the velocity curve is combined with a model for the light-emitting gas to predict the spatial variations in the spectrum of the galaxy. The above model is then fitted to radio interferometer observations of the spectrum of the gas. However, this model is subject to several limitations. Optical observations of the stars must not be contaminated by dust, which absorbs the light emitted by stars (e.g., [8]). Hence, only relatively dust-free galaxies may be analysed. One of the strengths of the MGE can also become a limitation: the MGE model has a large number of parameters, which allows it to fit the light distribution to high precision. In the presence of an active galactic nucleus (AGN), whose light mimics a concentration of stars at the centre of the galaxy, the MGE model will fit the AGN and thereby underestimate the SMBH mass (e.g., [9]). Finally, in the case of an extremely bright AGN, known as a quasar, fitting any stellar light model to optical images becomes impossible, as quasars outshine their host galaxies by several orders of magnitude (e.g., [10]). In this work, we address the above limitations with a new dynamical modelling methodology which does not require optical imaging of the galaxy. 2 Methodology 2.1 Neural deprojection of the Nuker model When optical imaging is unavailable, MGE models of stellar mass become degenerate with the SMBH mass, since the SMBH can be replaced by a central stellar overdensity. To enforce realistic stellar mass profiles, we adopt the Nuker model [11]: \Sigma_{*}(r)\;=\;\Sigma_{b}\,2^{(\beta-\gamma)/\alpha}\left(\frac{r}{r_{b}}\right)^{-\gamma}\left[\,1+\left(\frac{r}{r_{b}}\right)^{\alpha}\right]^{(\gamma-\beta)/\alpha}, (2) where \Sigma_{*} is the stellar surface mass density, and r=\sqrt{x^{2}+y^{2}/q^{\prime 2}} is the galactocentric radius (for a given 2D axis ratio q^{\prime} ). The free parameters of the model are the inner power law slope \gamma , the outer power law slope \beta , the transition sharpness between the inner and the outer power law \alpha , the break radius of the transition r_{b} , and the surface mass density at transition \Sigma_{b} . However, we cannot use the Nuker model on its own, as it lacks an analytic axisymmetric deprojection into 3D 1 1 1 A spherically symmetric deprojection exists [12], but since the stars at the centres of galaxies are typically axisymmetrically distributed, assuming spherical symmetry will lead to significant bias. . To combine the realistic stellar density profile of the Nuker with the analytic deprojection of the MGE, we require a mapping between the two parametrizations. We achieve this mapping by training a neural network (NN) to predict 1D MGE components that give a mass profile that corresponds to a given set of Nuker parameters. Hence, the MGE components serve as an intermediate parametrization which facilitates the calculation of a deprojected velocity profile for the parameters of interest (Nuker). 2.1.1 Training Data Our training set consists of 6.25e6 simulated Nuker profiles covering typical literature parameter ranges (see Appendix A ). We vary the parameters \alpha,\beta,\gamma , and r_{b} ; we do not need to include \Sigma_{b} in the training, as the true profile can be recovered simply by rescaling the Gaussian normalizations \Sigma_{i} with \Sigma_{b} . The training set thus consists of 6.25e6 sets of Nuker parameters \alpha,\beta,\gamma , r_{b} and the corresponding mass profiles calculated from Equation 2 with \Sigma_{b} set to 1 . 2.1.2 Neural network architecture and training Figure 1 represents our neural architecture. The last fully connected layer of our neural network outputs 64 values (Output 1) which represent the normalizations \Sigma_{i} of an MGE profile with 64 Gaussian components on a fixed grid of \sigma_{i} (see Appendix B for details). The Gaussian normalizations \Sigma_{i} required to accurately fit most Nuker profiles span a large dynamic range, from \sim\pm 10^{-12} to \sim\pm 10^{3} ; if we train the neural network to predict these values directly it destabilizes training. We thus apply an inverse symlog (or "symexp") activation function, \Sigma_{i}=\mathrm{symexp}(\Sigma_{i}^{\prime})=\mathrm{sgn}(\Sigma_{i}^{\prime})\,10^{-12}\!\left(10^{|\Sigma_{i}^{\prime}|}-1\right), (3) where \Sigma_{i}^{\prime} are the 64 values output by the final linear transformation layer and \Sigma_{i} are the 64 MGE normalizations (Output 1 in Figure 1 ). The symexp transformation compresses the dynamic range of \Sigma_{i}^{\prime} into \sim\pm 0.3 to \sim\pm 15 , which simplifies learning the weight matrix for that layer. To train the neural network to output Gaussian normalizations (Output 1 in Figure 1 ), we feed the 64 predicted \Sigma values and the corresponding fixed grids of \sigma_{i} and galactocentric radius r into the following equation: \Sigma_{\mathrm{MGE}}(r)=\sum_{i=1}^{N}\Sigma_{i}\,\exp\!\left(-\frac{r^{2}}{2\sigma_{i}^{2}}\right), (4) where \Sigma_{\mathrm{MGE}}(r) is the surface mass density profile of an MGE (Output 2 in Figure 1 ). We then adopt a mean squared error (MSE) loss between the predicted \Sigma_{\mathrm{MGE}}(r) and the true \Sigma(r) corresponding to the Nuker profile in the training data. Figure 1: A flowchart

Read the complete text