A Versatile Optical Frontend for Multicolor Fluorescence Imaging with Miniaturized Lensless Sensors Journal: opticajournal Publication type: Research Article
Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†, · 2025
Read A Versatile Optical Frontend for Multicolor Fluorescence Imaging with Miniaturized Lensless Sensors Journal: opticajournal Publication type: Research Article by Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-17860.txt.
Introduction
Lukas Harris and three co-authors design the front optics for tiny lensless fluorescence sensors, which could enable cheap tests at the point of care and imaging inside the body. A filter must block excitation light while letting faint fluorescent light through, but thin filters leak at steep angles.
A fiber optic plate absorbs off axis light and sharpens images. Simulations show that its light gathering angle drives tradeoffs among sensitivity, resolution, and thickness. Two built designs illustrate the range: one is far more sensitive, while the other images three colors at fine resolution over a short working distance.
Catalog record
| CREATOR | Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†, |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 55 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-17860
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Versatile Optical Frontend for Multicolor Fluorescence Imaging with Miniaturized Lensless Sensors Journal: opticajournal Publication type: Research Article Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,*, Lukas Harris 1,2,†, Micah Roschelle 1,2,†,*, Jack Bartley 2, and Mekhail Anwar 1,2,* Abstract Lensless imaging enables exceptionally compact fluorescence sensors, advancing applications in in vivo imaging and low-cost, point-of-care diagnostics. These sensors require a filter to block the excitation light while passing fluorescent emissions. However, conventional thin-film interference filters are sensitive to angle of incidence (AOI), complicating their use in lensless systems. Here we thoroughly analyze and optimize a technique using a fiber optic plate (FOP) to absorb off-axis light that would bleed through the interference filter while improving image resolution. Through simulations, we show that the numerical aperture (NA) of the FOP drives inherent design tradeoffs: collection efficiency improves rapidly with a higher NA, but at the cost of resolution, increased device thickness, and fluorescence excitation efficiency. To illustrate this, we optimize two optical frontends with full-width at half maximums (FWHMs) of 8.3° and 45.7°. Implementing these designs, we show that angle-insensitivity requires filters on both sides of the FOP, due to scattering. In imaging experiments, the 520- μ \mu m-thick high-NA design is 59× more sensitive to fluorescence while only degrading resolution by 3.2×. Alternatively, the low-NA design is capable of three-color fluorescence imaging with 110- μ \mu m resolution at a 1-mm working distance. Overall, we demonstrate a versatile optical frontend that is adaptable to a range of applications using different fluorophores, illumination configurations, and lensless imaging techniques. 1 Introduction Lensless imaging enables exceptionally compact sensors with a relatively high resolution over a large field of view [ 1 , 2 ] . When paired with multiplexed fluorescence imaging, these sensors are capable of high-contrast detection of multiple biomarkers, advancing an array of biomedical applications. For example, implantable or minimally invasive imagers allow for real-time recording of neural activity [ 3 , 4 ] , monitoring of disease progression and therapeutic response [ 5 , 6 , 7 ] , and intraoperative imaging of cancer during surgery [ 8 , 9 ] . Moreover, compact and low-cost fluorescence sensors could facilitate high-throughput, point-of-care diagnostics [ 10 , 11 ] . A critical component of these sensors is an optical filter, which selectively blocks excitation light, while passing the fluorescent emissions. For organic fluorophores, the emissions can be up to 6 orders of magnitude weaker than the excitation flux and are red-shifted as little as 10 nm from the excitation wavelength. Thus, an ideal filter should have an optical density (OD) around 6 at the excitation wavelength and a rapid roll-off between rejection and pass bands for efficient fluorescence imaging. In addition, the filter should be versatile, accommodating multiplexed imaging across the visible and near-infrared spectrum. Conventional lensed systems use thin-film interference filters to meet these specifications. However, these filters are angle-sensitive; as the angle of incidence (AOI) increases, the filter passband blue-shifts towards the excitation wavelength, leading to excitation bleed-through. This property is problematic for lensless systems, where the AOI is not precisely controlled by lenses [ 12 ] . Therefore, most prior lensless fluorescence imaging work has focused on alternative filter designs. For example, absorption filters composed of a dye [ 13 ] or semiconductor [ 14 ] are inherently angle-insensitive but suffer from gradual roll-offs and autofluorescence. Hybrid designs combining absorption and interference filters can eliminate out-of-band autofluorescence and improve the rejection-band characteristics [ 15 , 16 , 17 ] . However, absorption spectra are material-dependent and, thus, are not easily adapted to different fluorophores or for multiplexed imaging [ 18 , 19 ] . Another alternative, plasmonic filters [ 11 , 20 ] , can be integrated on-chip in the metal layers, but generally exhibit worse roll-off and rejection than absorption or interference filters. Instead of a filter, total internal reflection (TIR) optics can be used to confine the excitation light at the sensor surface [ 21 ] , but this approach is susceptible to scattering which is unavoidable with thick biological samples. Another filter-less technique is time-gated imaging [ 22 , 23 ] , where the laser is pulsed prior to imaging. However, this approach is challenging with organic fluorophores which have a fluorescence lifetime on the order of 1 ns [ 24 ] . Thus, a high-performance and angle-insensitive filter design that is adaptable to different fluorophores and for multiplexed imaging remains an elusive design goal. To address this need, we improve on a technique originally presented in [ 9 ] which uses a low-numerical-aperture (NA) fiber optic plate (FOP) to compensate for the angle-dependence of interference filters (Fig. 1 (a)). In this approach, the FOP acts as an angle filter passing light near normal incidence for imaging, while absorbing off-axis light that would otherwise bleed through the interference filter. The FOP also improves resolution by eliminating divergent rays that contribute to blur. In our prior work [ 9 , 6 ] , we demonstrate a 520- \mu m-thick optical frontend optimized for in vivo fluorescence imaging, achieving OD 6 excitation rejection as well as three-color fluorescence imaging with 110- \mu m resolution. However, this design is still sensitive to AOIs less than 5° and uses a low-NA FOP with a full-width at half-maximum (FWHM) of less than 10° to improve resolution, but at a severe cost to the total collected fluorescence emissions. Here, we undertake a comprehensive design-space exploration of this technique, revealing how it can be (1) modified to block excitation light across all AOIs allowing for different illumination configurations (Fig. 1 (b)) and (2) adapted to accept a wider range of AOIs to improve light collection efficiency and accommodate computational imaging techniques (Fig. 1 (c)). The AOI of the excitation light depends on the illumination configuration. For in vitro imaging of thin samples, the sample can be trans-illuminated at normal incidence through its backside. However, imaging thick tissue samples (as in in vivo applications) requires epi-illumination with the light typically introduced at oblique AOIs between the sample and the sensor. Epi-illumination involves coupling optics, such as a light-guide plate [ 21 , 25 ] , to guide light from edge-mounted sources, increasing the working distance and leading to reduced resolution (Fig. 1 (c)). However, the resolution can be improved with either a collimator like a FOP or an optical modulator, such as a phase mask [ 26 ] or diffuser [ 27 , 28 ] , and iterative reconstruction algorithms. While a collimator improves resolution by eliminating light at divergent angles, computational imaging approaches exploit larger AOIs to generate a sparse point spread function (PSF) with a large spatial extent. In this work, we analyze how these system-level specifications motivate the choice of specific filter and FOP design parameters. For the FOP, the driving design parameter is the NA: a higher NA expands the range of accepted angles, improving collection efficiency, but at a cost to resolution. While a high NA is desired for single-pixel sensors or computational imaging approaches, a