50-km fiber interferometer for testing gravitational signatures in quantum interference
Haocun Yu, Dorotea Macri, Thomas Morling, Eleonora Polini, Thomas B. Mieling, Peter Barrow, Begüm Kabagöz, Xinghui Yin, Piotr T. Chruściel, Christopher Hilweg, Eric Oelker, Nergis Mavalvala, Philip Walther · 2025
Read 50-km fiber interferometer for testing gravitational signatures in quantum interference by Haocun Yu, Dorotea Macri, Thomas Morling, Eleonora Polini, Thomas B. Mieling, Peter Barrow, Begüm Kabagöz, Xinghui Yin, Piotr T. Chruściel, Christopher Hilweg, Eric Oelker, Nergis Mavalvala, Philip Walther (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-17022.txt.
Introduction
Haocun Yu leads a team of thirteen authors reporting a fifty-kilometre fibre interferometer that works one photon at a time. The device is built to test whether gravity leaves signs in quantum interference, a meeting point of the two great theories of physics that is rarely probed in the lab. Table-top setups until now have lacked the fine touch needed for such tests.
The fibre loop reaches a phase sharpness the team judges enough to pick out a small gravity-linked signal, and they show such a signal in their runs. The measured effect matches the size they aimed for, within a modest margin. The result marks a step for quantum sensing with large fibre systems and opens a path toward sharper tests of gravity at the quantum scale.
Catalog record
| CREATOR | Haocun Yu, Dorotea Macri, Thomas Morling, Eleonora Polini, Thomas B. Mieling, Peter Barrow, Begüm Kabagöz, Xinghui Yin, Piotr T. Chruściel, Christopher Hilweg, Eric Oelker, Nergis Mavalvala, Philip Walther |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 22 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-17022
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
50-km fiber interferometer for testing gravitational signatures in quantum interference Preprint: APS/123-QED Haocun Yu, Dorotea Macri, Thomas Morling, Eleonora Polini, Thomas B. Mieling, Peter Barrow, Begüm Kabagöz, Xinghui Yin, Piotr T. Chruściel, Christopher Hilweg, Eric Oelker, Nergis Mavalvala, Philip Walther Abstract Quantum mechanics and general relativity are the foundational pillars of modern physics, yet experimental tests that combine the two frameworks remain rare. Measuring optical phase shifts of massless photons in a gravitational potential provides a unique quantum platform to probe gravity beyond Newtonian descriptions, but laboratory-based interferometers have not yet reached the sensitivity needed to access this regime. Here, we report the realization of a 50-km table-top Mach-Zehnder fiber interferometer operating at the single-photon level, achieving a phase sensitivity of 4.42 × 10 − 6 rad 4.42\text{\times}{10}^{-6}\text{\,}\mathrm{rad} root-mean-square (RMS) within the frequency range of 0.01 Hz to 5 Hz 0.01\text{\,}\mathrm{Hz}5\text{\,}\mathrm{Hz} . We demonstrate that this sensitivity is sufficient to resolve a phase-shift signal of 6.18 ± 44 × 10 − 5 rad 6.18\pm 44\text{\times}{10}^{-5}\text{\,}\mathrm{rad} RMS at 0.1 Hz 0.1\text{\,}\mathrm{Hz} , associated with a modulated gravity-induced signal. Our results establish a milestone for quantum sensing with large-scale optical interferometry, demonstrating the capability to detect gravitational redshifts in a local laboratory, thereby paving the way for testing quantum phenomena within general relativistic frameworks. FIG. 1: Layout of the Mach-Zehnder fiber interferometer, with both interferometer arms maintained at the same height. The interferometer is composed of two 50/50 fiber beam splitters (BS) and two 50-km low-loss fiber spools (yellow), each maintained under active temperature control. Single photons centered at 1550\text{\,}\mathrm{nm} , generated from a Type-0 photon source, are used to probe the interferometer phase sensitivity. A weak continuous-wave (CW) laser field at 1542\text{\,}\mathrm{nm} is used to lock the interferometer phase. This classical field co-propagates with the single photons through the interferometer before being separated by dense wavelength division multiplexers (DWDM) and directed to a homodyne detector. To stabilize both fast and slow phase fluctuations, the error signal from the homodyne detector is sent to an acousto-optic modulator (AOM) driven by a voltage-controlled oscillator (VCO) and to a fiber stretcher, respectively. The interferometer phase is extracted from the heralded photon number counts detected by superconducting nanowire single-photon detectors (SNSPDs). The core interferometer elements are placed in a thermally and acoustically isolated enclosure (blue shaded region). FIG. 2: Phase noise spectra of the single-photon interferometer from a 160-hour measurement, spanning the frequency band from {10}^{-4}\text{\,}\mathrm{Hz} to 5\text{\,}\mathrm{Hz} . The dim blue and green traces show the phase noise sensitivity calibrated from heralded single-photon counts at each interferometer output. The red trace shows the half-difference between the phase noises measured at the two interferometer outputs, rejecting common-mode noise of the interferometer. The peak at 0.25\text{\,}\mathrm{Hz} corresponds to the injected dither tone for calibration; The peak observed at 0.1\text{\,}\mathrm{Hz} corresponds to the simulated gravitationally-induced phase shift signal, with an expected root-mean-square (RMS) amplitude of 6.48\text{\times}{10}^{-5}\text{\,}\mathrm{rad} , in agreement with the measured value of 6.18\pm 44\text{\times}{10}^{-5}\text{\,}\mathrm{rad} . The signal is clearly resolved above the noise floor, which is primarily limited by photon shot noise. Additional peaks at 1\text{\,}\mathrm{Hz} and its harmonics arise from cryostat compressor noise. FIG. 3: (a) Measurements of injected signal amplitudes at 0.1\text{\,}\mathrm{Hz} . We use three different dithers with calibrated RMS amplitudes of 2.59\text{\times}{10}^{-04} , 1.30\text{\times}{10}^{-04} , and 6.48\text{\times}{10}^{-05}\text{\,}\mathrm{rad} (green dashed lines). The measurement durations are 18.2, 33.1, and 160 hours, respectively. The measured signal values are 2.40\pm 13\text{\times}{10}^{-4} , 1.30\pm 09\text{\times}{10}^{-4} , 6.18\pm 44\text{\times}{10}^{-5}\text{\,}\mathrm{rad} (red dots with error bars). The data for the smallest dither was combined from two separate runs (68.8 h and 91.2 h), yielding independent estimates of 6.33\pm 73\text{\times}{10}^{-5} and 6.06\pm 54\text{\times}{10}^{-5}\text{\,}\mathrm{r}\mathrm{a}\mathrm{d} (red dotted box). This demonstrates the repeatability of the measurement and the stability of the apparatus. The thresholds for signal-to-noise ratios (SNR) of 5 and 10 are shown in the plot to indicate the required measurement times for different signal levels. (b) Allan deviation (ADEV) of the in-phase component obtained from lock-in analysis of the simulated signal, showing the phase stability \sigma versus the averaging time \tau . The blue dots with error bars show overlapping ADEV values calculated from the 160-hour measurement. The data follows a 1/\sqrt{\tau} trend (blue line) and is consistent with a white noise process, indicating that the measured signal is stationary. The red triangle shows an estimate statistical uncertainty of the measurement from the demodulated time series. It is consistent with an extrapolation of the ADEV trend, as expected for a white noise process. Introduction.— Quantum mechanics revolutionized our understanding of the microscopic world, while Einstein’s theory of general relativity provides the most accurate description of gravity at macroscopic, even cosmological, scales. However, a unified framework connecting these two pillars of modern physics remains elusive, hindered by the lack of experimental insight. Although both theories have been tested with high precision Hanneke et al. 2008 ; Will 2014 ; LIGO Scientific Collaboration and Virgo Collaboration 2016 ; Delva et al. 2018 ; Takamoto et al. 2020 ; Bothwell et al. 2022 ; Zheng et al. 2023 , no experiment has yet accessed a regime where their concepts must be applied simultaneously. In recent decades, numerous proposals and experiments have sought to test gravitational effects on quantum systems. These efforts fall broadly into two categories: investigations of the emergence of entanglement arising solely from gravitational coupling between particles Bose et al. 2017 ; Marletto and Vedral 2017 ; Hall and Reginatto 2018 ; Kent and Pitalúa-Garc\́mathrm{i}a 2021 , and studies of how quantum states are influenced by classical gravitational fields Colella et al. 1975 ; Kasevich and Chu 1991 ; Kasevich and Chu 1992 ; Snadden et al. 1998 ; Altin et al. 2013 ; Xu et al. 2019 ; Panda et al. 2024 ; Overstreet et al. 2022 . Since the first observation of gravitationally-induced phase shifts in neutrons Colella et al. 1975 , the latter approach has seen significant progress with matter wave interferometers Kasevich and Chu 1991 ; Kasevich and Chu 1992 ; Snadden et al. 1998 ; Altin et al. 2013 ; Xu et al. 2019 ; Panda et al. 2024 ; Overstreet et al. 2022 . However, all experiments conducted to date remain consistent with Newtonian gravity and, therefore, do not necessitate a general relativistic explanation. Photons, as massless quantum particles, provide an ideal platform to probe the influence of gravity on quantum systems in regimes that elude a Newtonian description, thereby necessitating the simultaneous inclusion of quantum mechanics and general relativity Zych et al. 2012 ; Mieling et al. 2025 . Since general relativistic effects are extremely small in Earth’s weak gravitational field, experiments involving both general relativity and quantum mechanics are necessarily at the cutting edge of precision measurement. A promising approach to exploring this interface is to employ long-baseline photonic interferometers, in which the extended photon propagation time at different heights allows weak gravitational effects to build up to measurable levels. Several satellite-based proposals and initial proof-of-principle experiments have been put forward to realize this vision Rideout et al. 2012 ; Vallone et al. 2016 ; Xu et al. 2019 ; Lu et al. 2022 ; Barzel et al. 2022 ; Mieling et al. 2022 ; Mohageg et al. 2022 ; Wu et al. 2024