Channel-selective frequency up-conversion for frequency-multiplexed quantum network
Shoichi Murakami, Shunsuke Hiraoka, Toshiki Kobayashi, Takashi Yamamoto, Rikizo Ikuta · 2025
Read Channel-selective frequency up-conversion for frequency-multiplexed quantum network by Shoichi Murakami, Shunsuke Hiraoka, Toshiki Kobayashi, Takashi Yamamoto, Rikizo Ikuta (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-16085.txt.
Introduction
Shoichi Murakami and four co-authors show channel selective frequency up conversion for frequency multiplexed quantum networks. Quantum links send telecom photons through fiber, but many devices work best at visible wavelengths. Conversion must pick one frequency channel from many without disturbing the rest. Their method uses nonlinear optics inside a cavity tuned to the converted modes.
Any input mode within the multiplexed telecom band can be converted to a chosen visible output. Cavity resonances find which channel is selected. From classical conversion results they derive single photon signal to noise figures. Those figures support use as quantum frequency conversion. Reconfigurable switching and Bell readings between photons from separate links are highlighted applications.
Catalog record
| CREATOR | Shoichi Murakami, Shunsuke Hiraoka, Toshiki Kobayashi, Takashi Yamamoto, Rikizo Ikuta |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-16085
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Channel-selective frequency up-conversion for frequency-multiplexed quantum network Shoichi Murakami, Shunsuke Hiraoka, Toshiki Kobayashi, Takashi Yamamoto, Rikizo Ikuta Abstract We demonstrate channel-selective frequency up-conversion from telecom wavelengths around 1540 nm 1540\text{\,}\mathrm{n}\mathrm{m} for optical fiber communication to visible wavelengths around 780 nm 780\text{\,}\mathrm{n}\mathrm{m} , based on second-order optical nonlinearity in a cavity of the converted modes. In our experiment, we selectively convert a light from any frequency mode within frequency-multiplexed telecom signals to a desired output mode, determined by the cavity resonances. Based on the experimental results of the frequency up-conversion, we derive the signal-to-noise ratio of the process at the single-photon level, and discuss its applicability to channel-selective quantum frequency conversion (CS-QFC) in the context of frequency-multiplexed quantum networks. Finally, we describe specific use cases of the CS-QFC, which show its utility as a reconfigurable switching element in frequency-multiplexed networks, particularly for selectively performing Bell-state measurements between two photons originating from different frequencies. I Introduction Quantum frequency conversion (QFC) of photons 26 is a promising approach to link various kinds of quantum systems, such as neutral atoms 18 , ions 6 , NV centers 41 , SiV centers 5 , and so on, because each of the quantum systems interacts only with a photon at a frequency specific to its physical characteristics. With the aim of realizing an optical-fiber-based quantum internet 25 ; 44 ; 4 over long distances, including quantum repeaters with quantum memories 9 , QFC is essential for bridging the frequency gap between photons emitted from quantum systems and those in the telecommunication band. So far, extensive experimental research on QFC has focused particularly on connecting visible and near-infrared wavelengths to the telecom band 40 ; 20 . Recently, successful entanglement generation between remote quantum systems via entanglement swapping based on the Bell-state measurement (BSM) between telecom photons after QFC has been reported 48 ; 42 ; 37 ; 28 ; 38 ; 30 . In these experiments, each emitted photon is converted to the same telecom wavelength via frequency down-conversion using the second-order nonlinear optical medium with a strong pump light at a frequency corresponding to the difference between the input and output frequencies. For building efficient and flexible quantum communication systems, it is crucial to incorporate frequency-division multiplexing techniques into quantum networks involving entanglement swapping. Many experiments related to the generation and direct distribution of frequency-multiplexed entangled photon pairs over multiple frequency channels have been demonstrated 45 ; 23 ; 33 ; 12 ; 7 . Beyond these experiments, frequency-multiplexed two-photon interference aimed at BSM has also been reported 16 ; 15 ; 47 , although within the classically observable visibility regime. In these experiments, interference has been observed between photons originating from the same frequency channels using passively designed measurement systems. However, inspired by classical network systems, it is expected that large-scale frequency-multiplexed quantum networks will require not only passive architectures but also reconfigurable functionalities 27 ; 2 ; 35 ; 29 ; 36 , which will enable the network to be flexibly and efficiently expanded to support massive multi-user configurations and additional nodes. Figure 1: (a) Concept of the QFC-based optical switch. This device extracts only a photon in a specific frequency bin from multiplexed frequency channels transmitted through an optical fiber, while leaving the remaining frequency modes unaffected and passing them on to the subsequent transmission channel. (b) Concept of the channel-selective BSM using the QFC-based optical switch in a frequency-multiplexed quantum network. In the frequency-multiplexed reconfigurable quantum networks, the two distributed photons involved in BSM for entanglement swapping may not always be in the same frequency channel 34 . Therefore, similar to reconfigurable optical add/drop multiplexers (ROADMs) 13 ; 11 ; 10 widely used in the current fiber-based telecom network technologies, a QFC-based optical switch, as illustrated in Fig. 1 (a), that converts one of the frequency-multiplexed telecom photons to a photon at a different output wavelength is desirable. The QFC-based optical switch should possess the key abilities (i) to address a single frequency mode within the frequency-multiplexed channels; (ii) to convert a photon in the mode into a target frequency to enable a BSM; (iii) to preserve photonic states in all other frequency modes to avoid disturbing ongoing quantum communication in other channels; and (iv) to dynamically reconfigure the switching configuration on demand in response to network requirements or user demand. The conceptual figure of the BSM system based on the QFC-based optical switch for a frequency-multiplexed network is shown in Fig. 1 (b). By QFC, any two photons from arbitrary frequency channels can be extracted and measured in the same frequency mode for BSM, without disturbing photons in other frequency channels. Beyond the BSM system, the QFC-based optical switch offers a variety of applications in frequency-multiplexed quantum networks, including those involving matter-based quantum systems. Owing to the broad scope of these applications, further details are provided in the Discussion section. For this purpose, we experimentally demonstrate such a channel-selective frequency up-conversion using a laser light from the telecom band around 1540\text{\,}\mathrm{n}\mathrm{m} to 780\text{\,}\mathrm{n}\mathrm{m} via sum frequency generation (SFG) in a periodically poled lithium niobate (PPLN) waveguide with a cavity structure around 780\text{\,}\mathrm{n}\mathrm{m} . Unlike channel-selective QFCs (CS-QFCs) demonstrated in Refs. 43 ; 3 without a cavity structure, we have successfully demonstrated fully selective frequency up-conversion of light, owing to the cavity-assisted conversion setup, proposed as optical frequency tweezers 21 . This enables arbitrary selection of the single frequency mode from a frequency-multiplexed input and of the converted output mode among the cavity-resonant modes by tuning the pump frequency. Based on the experimental results, we estimate the signal-to-noise ratio (SNR) of the frequency up-conversion process, expected for input multiplexed signals at the single-photon level, and discuss applicability of our device to CS-QFC in frequency-multiplexed quantum networks. We present several use cases of the CS-QFC beyond channel-selective BSMs between photons from different frequency channels. Figure 2: (a) Design concept of CS-QFC. The red rectangular areas each with the width of \gamma_{\rm bin} represent the destinations accessible through the conversion process. Among the input photons distributed over multiple frequency bins (green wave packets), only a photon in a specific frequency bin is converted in a single tweezing process, and the bin can be selectively chosen by tuning the pump frequency. Details are given in the main text. (b-d) Implementation of CS-QFC based on a SFG with a cavity structure around the converted frequencies. These illustrate the tweezing operation of only the photons in a specific tooth of a frequency comb input with spacing \Delta\omega_{\rm comb} , by selecting the pump frequency. (b) When the pump frequency \omega_{\rm p} is \omega_{\mathrm{p},(i,j)}(=\omega_{\mathrm{v},j}-\omega_{\mathrm{t},i}) , only the photon centered at \omega_{\mathrm{t},i} is converted. (c) For \omega_{\rm p}=\omega_{\mathrm{p},(i,j)}-\Delta\omega_{\mathrm{comb}} , only the photon at \omega_{\mathrm{t},i}+\Delta\omega_{\rm comb} is converted. (d) For \omega_{\rm p}=\omega_{\mathrm{p},(i,j)}+\Delta\omega_{\rm FSR} , the photon at \omega_{\mathrm{t},i} is converted to the neighboring bin centered at \omega_{\mathrm{v},j}+\Delta\omega_{\rm FSR} . II Design concept and implementation II.1 Design concept In the scenarios involving the optical frequency tweezers through frequency up-conversion considered in this paper, we use a single-frequency pump light to selectively tweeze an input photon from a target frequency bin within multiplexed frequency modes to a desired output frequency bin in each individual process. A conceptual illustration is shown in