Enabling NLOS Imaging Capabilities at the Initial Access of 6G Base Stations

Davide Tornielli Bellini, Dario Tagliaferri, Pietro Grassi, Davide Scazzoli, Stefano Tebaldini, Umberto Spagnolini · 2025

Read Enabling NLOS Imaging Capabilities at the Initial Access of 6G Base Stations by Davide Tornielli Bellini, Dario Tagliaferri, Pietro Grassi, Davide Scazzoli, Stefano Tebaldini, Umberto Spagnolini (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-15416.txt.

Introduction

Davide Tornielli Bellini, Dario Tagliaferri, Pietro Grassi, Davide Scazzoli, Stefano Tebaldini, and Umberto Spagnolini show how a future 6G base station could image objects hidden around a corner. Seeing what is not in a direct line of sight is a hard task for systems that mix sensing with communication. Earlier fixes needed a full map of the site or special reflectors placed in the scene.

Their setup uses a plain modular reflector during the normal first link-up, when the station sweeps a narrow beam to find users. Extra beam patterns plus the reflector let the station build a sharp image from echoes. Formulas, simulations, and a real test support the method, including tracking moving targets.

Catalog record

CREATORDavide Tornielli Bellini, Dario Tagliaferri, Pietro Grassi, Davide Scazzoli, Stefano Tebaldini, Umberto Spagnolini
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE76 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2511-15416

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Enabling NLOS Imaging Capabilities at the Initial Access of 6G Base Stations Thanks: The authors are with the Department of Electronics, Information and Bioengineering, Politecnico di Milano, Via Ponzio 24/5, 20133 Milano, Italy. Corresponding author: Davide Tornielli Bellini (email: [email protected]). Davide Tornielli Bellini, Dario Tagliaferri, Pietro Grassi, Davide Scazzoli, Stefano Tebaldini, Umberto Spagnolini Abstract Sensing in non-line-of-sight (NLOS) is one of the major challenges for integrated sensing and communication systems. Existing countermeasures for NLOS either use prior knowledge on the environment to characterize all the multiple bounces or deploy anomalous reflectors in the environment to enable communication infrastructure to ” see behind the corner ”. This work addresses the integration of monostatic NLOS imaging functionalities into the initial access (IA) procedure of a next generation base station (BS), by means of a non-reconfigurable modular reflector. During standard-compliant IA, the BS sweeps a narrow beam using a pre-defined dedicated codebook to achieve the beam alignment with users. We introduce the imaging functionality by enhancing such codebook with imaging-specific entries that are jointly designed with the angular configuration of the modular reflector to enable high-resolution imaging of a region in NLOS by coherently processing all the echoes at the BS. We derive closed-form expressions for the near-field (NF) spatial resolution, as well as for the effective aperture (i.e., the portion of the reflector that actively contributes to improve image resolution). The problem of imaging of moving targets in NLOS is also addressed, and we propose a maximum-likelihood estimation for target’s velocity in NF and related theoretical bound. Further, we discuss and quantify the inherent communication-imaging performance trade-offs and related system design challenges through numerical simulations. Finally, the proposed imaging method employing modular reflectors is validated both numerically and experimentally, showing the effectiveness of our concept. I Introduction Integrated sensing and communication (ISAC) is one of the most promising technologies of the next generation (6G) of wireless networks, combining communication and radar sensing functionalities into a single system, with shared resources [ 1 ] . In the broad meaning of sensing, target localization is the procedure to estimate the position, velocity, and/or orientation of selected targets of interest (targets’ state) from a radar [ 2 ] , maximizing the estimation accuracy . Radio imaging , instead, which is the focus of this paper, refers to the generation of a map of the reflectivity of the environment, from which to infer the number of targets (via detection) and their shape. Rather than estimation accuracy, imaging performance is measured in terms of resolution , i.e., the capability of distinguishing closely spaced targets [ 3 ] . Research on ISAC covered several areas, considering both monostatic (co-located transmitter and sensing receiver) and bistatic/multistatic (separate transmitter and sensing receiver) settings. Most of works address target localization, such as [ 4 ] , while the integration of imaging into communication systems is more recent [ 5 , 6 , 7 , 8 , 9 , 10 , 11 ] . Some works proposed orthogonal waveform design for single-node ISAC [ 5 ] , while others consider a monostatic full-duplex base station (BS) that simultaneously serves multiple users (UEs) and images its surroundings through joint beamforming by steering towards fictitious ”virtual UEs”. Works such as [ 9 , 10 ] formulate imaging as an underdetermined inverse scattering problem, where communication signals are used to reconstruct a 2D/3D occupancy map of the environment, whose solution requires prior information on targets, e.g,, by imposing (or implicitly assuming) sparsity to regularize the inversion (as they have less measurements than unknowns, i.e., number of pixels). The most recent work along this direction is [ 11 ] , considering 3D imaging of multiple targets under occlusion effects. One of the remaining challenges for ISAC is operation in non-line-of-sight (NLOS). On one side, communication in dense multipath and even in pure NLOS is a reality, exploiting reflections from obstacles to enable high-capacity multiple-input-multiple-output (MIMO) links and spatial diversity [ 12 ] . In this case, knowing the reflected paths is irrelevant to the data detection, the communication channel is then compensated for at the receiver. Radar sensing, instead, leverages the scattered field from targets, thus (i) typical signal processing techniques assume that the forward and backward paths to and from the target are in LOS, and (ii) the amount of scattered power from a typical target is much lower than the power of a reflected wave (e.g., by a large wall), thus sensing path-loss is generally higher compared to communication, for a given coverage area. For NLOS operation, therefore, sensing would need an additional reflection from an obstacle with known position and electromagnetic properties , at the price of increased path-loss. I-A Related Works on Sensing and ISAC in NLOS Sensing in NLOS has been addressed for radars, see for instance [ 13 , 14 , 15 , 16 , 17 , 18 , 19 ] . All these works exploit walls and/or a properly placed metallic mirror to overcome the NLOS sensing problem, at the price of being limited in the NLOS exploration angle by specular reflection. Moreover, the imaging resolution and localization accuracy is ultimately dictated by diffraction, and thus by the number of antennas of the radar. A notable exception is [ 19 ] , where the authors purposely exploit a rough surface to widen the reflection beam beyond diffraction limits, at the price of an average reduction of the signal-to-noise ratio (SNR) compared to use of mirrors. Recently, the widespread interest in anomalous mirrors (such as metasurfaces ) gave a further push in the research for NLOS sensing. Anomalous mirrors are 2D arrays of wavelength-sized unit cells (meta-atoms) whose complex impedance is engineered to accomplish advanced tasks (beam splitting and focusing, anomalous reflection) according to the generalized Snell’s law of reflection [ 20 ] . For dynamic configuration in time, we refer to reconfigurable intelligent surfaces (RISs), while static reflectors are preconfigured during the manufacturing process, yielding orders of magnitude cost reduction compared to RISs at the price of low flexibility. For sensing, metasurfaces enable anomalous reflections beyond specular, obviating the limitations of previous works [ 13 , 14 , 15 , 16 , 17 , 18 , 19 ] and extending sensing coverage in NLOS. The vast majority of the literature on metasurfaces for NLOS sensing considers RISs, mainly for localization purposes, see for instance [ 21 , 22 ] . Here, the authors use a RIS to assist radar operation in NLOS conditions, suggesting its placement close to radar or the target to limit path-loss. To a minor extent, metasurfaces have been explored as a boost for imaging, e.g., see [ 23 , 24 , 25 , 26 , 27 , 28 ] . Works like [ 23 , 24 , 25 , 26 ] , approach imaging again as an inverse scattering problem—the same principle of ISAC works [ 8 , 9 , 10 ] —requriign prior target information. Differently, works [ 27 , 28 ] (and references therein) deal with tomography , namely imaging the internal structure of targets by processing the waves that propagate through the object in straight lines (only valid at relatively high frequencies). Concerning ISAC-specific works for NLOS operation, the literature is relatively

Read the complete text