Anchor-and-Connect: Robotic Aerial Base Stations Transforming 6G Infrastructure
Wen Shang, Yuan Liao, Vasilis Friderikos, Halim Yanikomeroglu · 2025
Read Anchor-and-Connect: Robotic Aerial Base Stations Transforming 6G Infrastructure by Wen Shang, Yuan Liao, Vasilis Friderikos, Halim Yanikomeroglu (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2511-15341.txt.
Introduction
Wen Shang and three co-authors propose robotic aerial base stations that anchor to tall urban structures instead of hovering. Flying base stations can add wireless capacity where needed, but battery limits restrict hovering to minutes. Robotic versions carry energy neutral grippers that let them perch autonomously. Perching extends service to hours at the same site.
The paper sets out hardware, workflow, and communication needs for the concept. Anchored stations can join the radio access network and boost capacity on demand. That longer endurance removes a fundamental barrier to wider adoption. Urban landforms like towers and rooftops become network infrastructure. The concept paper maps what must be built and tested for sixth generation aerial networks.
Catalog record
| CREATOR | Wen Shang, Yuan Liao, Vasilis Friderikos, Halim Yanikomeroglu |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2511-15341
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Anchor-and-Connect: Robotic Aerial Base Stations Transforming 6G Infrastructure Wen Shang, Yuan Liao, Vasilis Friderikos, Halim Yanikomeroglu Abstract Despite the significant attention that aerial base stations (ABSs) have received recently, their practical implementation is severely weakened by their limited endurance due to the battery constraints of drones. To overcome this fundamental limitation and barrier for wider adoption, we propose the concept of robotic aerial base stations (RABSs) that are equipped with energy-neutral anchoring end-effectors able to autonomously grasp or perch on tall urban landforms. Thanks to the energy-efficient anchoring operation, RABSs could offer seamless wireless connectivity for multiple hours compared to minutes of the typical hovering-based ABSs. Therefore, the prolonged service capabilities of RABSs allowing them to integrate into the radio access network and augment the network capacity where and when needed. To set the scene, we discuss the key components of the proposed RABS concept including hardware, workflow, communication considerations, and regulation issues. Then, the advantages of RABSs are highlighted which is followed by case studies that compare RABSs with terrestrial micro BSs and other types of non-terrestrial communication infrastructure, such as hovering-based, tethered, and laser-powered ABSs. I Introduction Aerial base stations (ABSs) mounted on airborne platforms, such as uncrewed aerial vehicles (UAVs), exhibit an increasing potential within the developing landscape of 6G cellular networks thanks to their functional flexible deployment and three dimensional maneuverability. Summarized by standards organization including the 3rd Generation Partnership Project (3GPP) and the International Telecommunication Union (ITU), ABSs could be utilized to play different roles in wireless systems, such as small base stations (BSs), mobile relays, data collectors, and moving anchors for localization. Although ABSs have attracted significant attention from both academia and industry in recent years, the limited endurance restricted by the capacity of onboard batteries is still a critical issue in sustainable networks. This issue becomes particularly pronounced when ABSs are intended to offer daily mobile data service rather than just being used for very short-term sporadic emergency communications. With this in mind, we are exploring the use of robotic aerial base stations (RABSs) with anchoring capabilities via robotic manipulators [ 1 ] to allow for a massive improvement in providing long-term wireless connectivity compared to hovering/flying ABSs. More specifically, by taking advantage of the grasping capabilities [ 2 ] , RABSs can attach autonomously to lampposts or other urban landforms to serve as small cells for multiple hours or even longer. This is in contrast to the flying/hovering endurance for the small-size rotary-wing UAVs acting as small BSs which is significantly less than an hour. Fig. 1: An overview of different ABS platforms developed to overcome the endurance issue: RABS, laser-powered ABS, hovering ABS, and tethered ABS. Recently, significant efforts have been devoted to addressing the endurance issue of aerial base stations since this is a major limiting factor. Figure 1 depicts an overview of different ABS platforms developed to overcome the endurance issue. The wireless power transfer technique represents a promising solution for powering ABSs without service interruption, allowing for recharging at ground stations. In [ 3 , 4 ] , high-energy laser beams transmitted from a ground station are utilized to power ABSs. Theoretically, the laser-powered ABS can provide an unlimited serving time when in close proximity to the charging station; however, it cannot be considered as a scalable solution in terms of energy efficiency and it is also highly problematic in terms of safety for dense urban environments. In [ 5 ] , the free space optics (FSO) beam is proposed to recharge ABSs via wireless power transfer. However, the energy transfer efficiency of FSO is greatly affected by environmental factors, e.g., when an ABS is located at an altitude of 1 km, the link margin is 38 dB in clear weather in contrast to -15 dB in a foggy day. The authors of [ 6 ] utilize a tethered UAV to carry an ABS, in which a tether linking the UAV with a ground station could transfer both data and power simultaneously. Although tethered UAVs can communicate with ground devices without the need to recharge, this seamless connection comes at the expense of limited flexibility. Moreover, Nokia Bell Labs developed a landing-based ABS prototype named F-cell [ 7 ] , to satisfy emergency communication requirements. The F-cell can be carried and transported by a UAV, and then dropped on rooftops or other easy-to-land platforms to offer wireless service. Each F-cell is equipped with a solar panel to provide the processing energy and a 64-antenna array to enhance the wireless backhaul capacity. However, the F-cell requires a flat area to take off and land, thereby significantly restricting its operational capabilities, whilst facing safety challenges since it is not fixed to the surface. Notably, RABSs can be deemed as autonomous robots that are able to safely grasp in wide set of different tall urban landforms by utilizing robotic manipulators. Besides, unlike the F-cell that is transported and relocated by a UAV, RABS can respond to communication requirements more flexibly and quickly thanks to its inherent flying ability. Fig. 2: Hardware structure of the designed RABS. Conventional drone-based stations typically remain airborne for only 30 to 45 minutes, which limits their use primarily to niche scenarios such as emergency and rescue operations. In contrast, extending operational times to several hours or even days would unlock a wide range of new opportunities. Considering the functional movable ability and energy efficiency, we envision a wide range of possible use cases for RABSs in dense urban areas to assist towards the aim of network densification without the need for permanent infrastructure deployment. Firstly, considering the low data rate of cell-edge users and the high possibility of BSs being overloaded during unexpected crowded events, i.e., congestion episodes, RABSs can be deployed to track spatial-temporal traffic variations as small BSs or relays, to significantly enhance the network connectivity and extend the cell coverage effectively. Secondly, in next-generation cellular networks, new radio applications always place more extensive and stringent requirements on communication systems, in which cases RABSs can be utilized to satisfy these new radio applications, e.g., RABSs attached to lampposts can act as roadside units to offer low-latency and high-reliable service in intelligent transportation systems. They can also be installed with edge computing or caching modules to alleviate the overload and congestion in cloud servers in case of congestion episodes. Thirdly, RABSs can cooperate with other types of non-terrestrial nodes located at different vertical platforms, such as high-altitude platform stations (HAPs) as well as satellites, and provide wireless access from the side closer to ground users. Lastly, with full control and longer endurance, RABS with perception systems can employ integrated sensing and communication technology to sense and manage specific information, such as capturing crop information and assisting decisions in smart agriculture. II System Architecture Design Considerations and Challenges II-A A Primer on Hardware Design The recent development in multi-rotor UAVs enables ABSs to perform a wide range of operations in a controllable manner, i.e., flying along a predefined route, hovering at a specific location and cooperating with other ABSs. According to their mechanical design, UAVs can be classified into fixed-wing and rotary-wing UAVs. Because small-size rotary-wing UAVs are able to take off and land on various